ZCZiqiang Chen

Ziqiang Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ziqiang Chen has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Low-Power 2D Reconfigurable Reflecting Surface With High-Speed Serial Control for Continuous Scanning and Tracking

    by Ziqiang Chen, Tianke Qiu, George V. Eleftheriades

    This paper presents a complete design framework for a low-power, fast-switching Reconfigurable Intelligent Surface (RIS) operating at 5.2 GHz, with capabilities for sidelobe shaping, intelligent tracking, and signal scanning. The framework centers on the design methodology and implementation of a high-frequency, low-power, low-complexity serial control circuit tailored for varactor-based tuning. A custom RIS prototype was developed to demonstrate the circuit’s ability to assign arbitrary voltages across a 64-element array, enabling reconfiguration at 60 Hz while maintaining an average power consumption of only 39 mW. To validate the practicality of the system as an intelligent platform, two key functionalities are demonstrated: (1) intelligent tracking of a moving transmitter to maintain optimal signal strength during video transmission, and (2) spatial signal scanning to map the distribution of signal strength across both elevation and azimuthal planes. Finally, both simulated and measured performance results, including beam patterns, bandwidth, and other relevant metrics, are presented to validate the effectiveness of the proposed RIS system.

  • Soft Three-Axis Capacitive Force Sensor for Robotic E-Skin on Curved Surfaces

    by Kieran Morton, Ryusuke Ishizaki, Zi Chen, Mirza S. Sarwar, John D. W. Madden

    Many soft sensors have emerged in to meet the needs of modern technologies such as soft robotics, where high conformability and sensor adaptability is required. Little attention has been paid to how these soft sensors perform when used in a curved geometry, such as on the forearm or finger of robot arm. We explore the effect of indentation by a flat object at radii of curvature as small as 10 mm – corresponding to a wide finger. The 3-axis capacitive force sensor is composed of Ecoflex 00-30 pillars forming the dielectric and patterned carbon black/Ecoflex electrodes, mounted on a flexible printed circuit board for bottom connections. As sensor radius of curvature decreases the sensor increases in perceived sensitivity to applied force, with normal force sensitivity increasing from 0.27% change in capacitance per Newton (1.4%kPa -1 ) at 100 mm radii to 0.47%N -1 (2.4%kPa -1 ) at 10 mm radii, a 58% increase. Shear sensitivity in the non-curved direction increases by 155% while in the circumferential direction the sensitivity increases by 366%. This increase in sensitivity is due to the increase in local pressure due to decreasing surface area contact, especially in the circumferential direction when the sensor becomes greater than 25% of the radius of curvature. A similar trend is expected for grasping of rounded objects, where higher curvature will lead to concentration of stress, with sharp edges being the extreme case. The sensor is applied to a robotic hand to assess normal and shear forces when gripping and lifting objects.