Gabriela Croitoru
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gabriela Croitoru has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Nicolaie Pavel
National Institute for Laser, Plasma and Radiation Physics
3 shared publications Florin Jipa
2 shared publicationsA. Kuncser
National Institute of Materials Physics, Bucharest, Magurele, 077125, 405A Atomistilor Str., Romania
1 shared publicationA.G. Doroshenko
Institute for Single Crystals, NAS of Ukraine, 60 Nauky Avenue, Kharkiv, 61072, Ukraine
1 shared publication- Alin Broasca
National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania
1 shared publication - Flavius Voicu
National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania
1 shared publication
Latest Publications
- 13 August 2024
- Published by Elsevier in Optical Materials
- Vol. 156
Reactive sintering of coaxial Yb3+:YAG/YAG transparent ceramics
- 13 August 2024
- Published by Elsevier in Optical Materials
- Vol. 156
Reactive sintering of coaxial Yb3+:YAG/YAG transparent ceramics
- Open Access
Buried Depressed-Cladding Waveguides Inscribed in Nd3+ and Yb3+ Doped CLNGG Laser Crystals by Picosecond-Laser Beam Writing
Buried depressed-cladding waveguides were fabricated in 0.7-at.% Nd:Ca3Li0.275Nb1.775Ga2.95O12 (Nd:CLNGG) and 7.28-at.% Yb:CLNGG disordered laser crystals grown by Czochralski method. Circular waveguides with 100 μm diameters were inscribed in both crystals with picosecond (ps) laser pulses at 532 nm of 0.15 μJ energy at 500 kHz repetition rate. A line-by-line writing technique at 1 mm/s scanning speed was used. Laser emission at 1.06 μm (with 0.35 mJ pulse energy) and at 1.03 μm (with 0.16 mJ pulse energy) was obtained from the waveguide inscribed in Nd:CLNGG and Yb:CLNGG, respectively, employing quasi-continuous wave pumping with fiber-coupled diode lasers. The waveguide realized in RE3+-doped CLNGG crystals using ps-laser pulses at high repetition rates could provide Q-switched or mode-locked miniaturized lasers for a large number of photonic applications.
Open AccessBuried Depressed-Cladding Waveguides Inscribed in Nd3+ and Yb3+ Doped CLNGG Laser Crystals by Picosecond-Laser Beam Writing
Buried depressed-cladding waveguides were fabricated in 0.7-at.% Nd:Ca3Li0.275Nb1.775Ga2.95O12 (Nd:CLNGG) and 7.28-at.% Yb:CLNGG disordered laser crystals grown by Czochralski method. Circular waveguides with 100 μm diameters were inscribed in both crystals with picosecond (ps) laser pulses at 532 nm of 0.15 μJ energy at 500 kHz repetition rate. A line-by-line writing technique at 1 mm/s scanning speed was used. Laser emission at 1.06 μm (with 0.35 mJ pulse energy) and at 1.03 μm (with 0.16 mJ pulse energy) was obtained from the waveguide inscribed in Nd:CLNGG and Yb:CLNGG, respectively, employing quasi-continuous wave pumping with fiber-coupled diode lasers. The waveguide realized in RE3+-doped CLNGG crystals using ps-laser pulses at high repetition rates could provide Q-switched or mode-locked miniaturized lasers for a large number of photonic applications.
- 4 January 2024
- Published by Elsevier in Optical Materials
- Vol. 148
Laser emission from buried depressed-cladding waveguides inscribed in Nd:YAG ceramics by picosecond-laser beam writing
- 4 January 2024
- Published by Elsevier in Optical Materials
- Vol. 148
Laser emission from buried depressed-cladding waveguides inscribed in Nd:YAG ceramics by picosecond-laser beam writing
- Open Access
Passive Q-Switching by Cr4+:YAG Saturable Absorber of Buried Depressed-Cladding Waveguides Obtained in Nd-Doped Media by Femtosecond Laser Beam Writing
We report on laser performances obtained in Q-switch mode operation from buried depressed-cladding waveguides of circular shape (100 μm diameter) that were inscribed in Nd:YAG and Nd:YVO4 media by direct writing with a femtosecond laser beam. The Q-switch operation was realized with a Cr4+:YAG saturable absorber, aiming to obtain laser pulses of moderate (few μJ) energy at high (tens to hundreds kHz) repetition rate. An average power of 0.52 W at 1.06 μm consisting of a train of pulses of 7.79 μJ energy at 67 kHz repetition rate, was obtained from a waveguide realized in a 4.8 mm long, 1.1-at % Nd:YAG ceramics; the pulse peak power reached 1.95 kW. A similar waveguide that was inscribed in a 3.4 mm long, 1.0-at % Nd:YVO4 crystal yielded laser pulses with 9.4 μJ energy at 83 kHz repetition rate (at 0.77 W average power) and 1.36 kW peak power. The laser performances obtained in continuous-wave operation were discussed for each waveguide used in the experiments. Thus, a continuous-wave output power of 1.45 W was obtained from the circular buried depressed-cladding waveguide inscribed in the 1.1-at %, 4.8 mm long Nd:YAG; the overall optical-to-optical efficiency, with respect to the absorbed pump power, was 0.21. The waveguide inscribed in the 1.0-at %, 3.4 mm long Nd:YVO4 crystal yielded 1.85 W power at 0.26 overall optical efficiency. This work shows the possibility to build compact laser systems with average-to-high peak power pulses based on waveguides realized by a femtosecond (fs) laser beam direct writing technique and that are pumped by a fiber-coupled diode laser.
Open AccessPassive Q-Switching by Cr4+:YAG Saturable Absorber of Buried Depressed-Cladding Waveguides Obtained in Nd-Doped Media by Femtosecond Laser Beam Writing
We report on laser performances obtained in Q-switch mode operation from buried depressed-cladding waveguides of circular shape (100 μm diameter) that were inscribed in Nd:YAG and Nd:YVO4 media by direct writing with a femtosecond laser beam. The Q-switch operation was realized with a Cr4+:YAG saturable absorber, aiming to obtain laser pulses of moderate (few μJ) energy at high (tens to hundreds kHz) repetition rate. An average power of 0.52 W at 1.06 μm consisting of a train of pulses of 7.79 μJ energy at 67 kHz repetition rate, was obtained from a waveguide realized in a 4.8 mm long, 1.1-at % Nd:YAG ceramics; the pulse peak power reached 1.95 kW. A similar waveguide that was inscribed in a 3.4 mm long, 1.0-at % Nd:YVO4 crystal yielded laser pulses with 9.4 μJ energy at 83 kHz repetition rate (at 0.77 W average power) and 1.36 kW peak power. The laser performances obtained in continuous-wave operation were discussed for each waveguide used in the experiments. Thus, a continuous-wave output power of 1.45 W was obtained from the circular buried depressed-cladding waveguide inscribed in the 1.1-at %, 4.8 mm long Nd:YAG; the overall optical-to-optical efficiency, with respect to the absorbed pump power, was 0.21. The waveguide inscribed in the 1.0-at %, 3.4 mm long Nd:YVO4 crystal yielded 1.85 W power at 0.26 overall optical efficiency. This work shows the possibility to build compact laser systems with average-to-high peak power pulses based on waveguides realized by a femtosecond (fs) laser beam direct writing technique and that are pumped by a fiber-coupled diode laser.
- 20 June 2017
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 7 (7) , 2496-2504
Passive Q-switch laser operation of circular, buried depressed-cladding waveguides realized by direct fs-laser beam writing in Nd:YAG/Cr^4+:YAG composite media
Circular, buried depressed-cladding waveguides were inscribed by direct fs-laser beam writing in diffusion-bonded Nd:YAG/Cr4+:YAG composite media. Passive Q-switch operation was achieved using the pump at 807 nm with a fiber-coupled diode laser. Laser pulses at 1.06 μm with energy of 15.7 μJ and 3.9-ns duration (corresponding to a peak power of 4.0 kW) were obtained from a waveguide of 150-μm diameter that was realized in a 10.3-mm long, 1.0-at.% Nd:YAG/Cr4+:YAG composite medium. The length of Nd:YAG crystal was 7.0 mm and initial transmission of Cr4+:YAG saturable absorber crystal was 0.70. The average output power reached 1.13 W.
- 20 June 2017
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 7 (7) , 2496-2504
Passive Q-switch laser operation of circular, buried depressed-cladding waveguides realized by direct fs-laser beam writing in Nd:YAG/Cr^4+:YAG composite media
Circular, buried depressed-cladding waveguides were inscribed by direct fs-laser beam writing in diffusion-bonded Nd:YAG/Cr4+:YAG composite media. Passive Q-switch operation was achieved using the pump at 807 nm with a fiber-coupled diode laser. Laser pulses at 1.06 μm with energy of 15.7 μJ and 3.9-ns duration (corresponding to a peak power of 4.0 kW) were obtained from a waveguide of 150-μm diameter that was realized in a 10.3-mm long, 1.0-at.% Nd:YAG/Cr4+:YAG composite medium. The length of Nd:YAG crystal was 7.0 mm and initial transmission of Cr4+:YAG saturable absorber crystal was 0.70. The average output power reached 1.13 W.