Serge Dzo Mawuefa Afenyiveh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Serge Dzo Mawuefa Afenyiveh has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Tchilabalo Pakam
Laboratoire Matériaux, Energies Renouvelables et Environnement, Département de Physique, Faculté des Sciences et Techniques, Université de Kara 1 , 404 Kara, Togo
3 shared publications - Younes Menni
Energy and Environment Laboratory, Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama (Ctr. University Naama) 1 , P.O. Box 66, Naama 45000
3 shared publications Assiongbon Adanlété Adjanoh
Department of Physics, Faculty of Science and Technologies, Laboratoire Materiau, Energie Renouvelable et Environnement, Université de Kara
2 shared publications- Assiongbon Adanlété Adjanoh
Université de Kara
2 shared publications - Laurent Ranno
Université Grenoble Alpes
2 shared publications - Mohammed Ayad Alkhafaji
College of Technical Engineering, National University of Science and Technology 4 , Dhi Qar 64001
2 shared publications
Latest Publications
- Open Access
- 1 March 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (3)
An automatic generalized Gaussian mixture-based approach for accurate brain tumor segmentation in magnetic resonance imaging analysis
Image segmentation is crucial in medical science for feature extraction, analysis, and interpretation, especially brain tumor segmentation, which is challenging. Prior researchers have proposed both semi-automatic and fully automatic methods for this purpose. In the present paper, we propose a new automatic approach that combines thresholding and the Generalized Gaussian Mixture Model (GGMM) with the expectation–maximization algorithm for brain tumor segmentation from Magnetic Resonance Imaging (MRI) histogram data. Our method isolates the tumor region using a thresholding technique and then employs the GGMM to cluster the tumor’s regions. Performance analysis of our approach was performed by using ground truth pre-segmented images as a reference, and it has an excellent performance in tumor region detection with high values for metrics such as the Dice coefficient, sensitivity, accuracy, specificity, and precision. Our work was executed randomly on a dataset of nine distinct patient MRIs. The FLAIR MRI modality was used for thresholding, and the T1ce MRI modality was used for segmentation. The results seem promising, indicating successful tumor region detection and segmentation.
- 1 March 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (3)
Open AccessAn automatic generalized Gaussian mixture-based approach for accurate brain tumor segmentation in magnetic resonance imaging analysis
Image segmentation is crucial in medical science for feature extraction, analysis, and interpretation, especially brain tumor segmentation, which is challenging. Prior researchers have proposed both semi-automatic and fully automatic methods for this purpose. In the present paper, we propose a new automatic approach that combines thresholding and the Generalized Gaussian Mixture Model (GGMM) with the expectation–maximization algorithm for brain tumor segmentation from Magnetic Resonance Imaging (MRI) histogram data. Our method isolates the tumor region using a thresholding technique and then employs the GGMM to cluster the tumor’s regions. Performance analysis of our approach was performed by using ground truth pre-segmented images as a reference, and it has an excellent performance in tumor region detection with high values for metrics such as the Dice coefficient, sensitivity, accuracy, specificity, and precision. Our work was executed randomly on a dataset of nine distinct patient MRIs. The FLAIR MRI modality was used for thresholding, and the T1ce MRI modality was used for segmentation. The results seem promising, indicating successful tumor region detection and segmentation.
- Open Access
- 1 November 2024
- Published by IOP Publishing in Journal of Physics Communications
- Vol. 8 (11) , 115005
Impact of coil envelope on the coupling coefficient in magnetic induction wireless power transmission systems
Research in the field of wireless energy transmission by magnetic induction has increased in recent years, due to the diversity of applications, such as medicine, electronics, and transport, that require this technology. Despite its maturity to date, this technology has struggled itself due to the short transmission distance and low coupling coefficient between the transmitting and receiving coils. These coils are usually protected by an envelope. However, the impact of the nature of the envelope on the coupling coefficient has not been studied. This work focuses on the impact of the nature of the coil protection envelope on the coupling coefficient. Three-dimensional flat spiral coils and the protective envelope are modeled and subjected to parametric analysis with variable air gaps and frequencies using ANSYS-Electronics Maxwell 2022 R1 software with the finite element method (FEM). Simulation results show that a coil protected by an insulating envelope has a higher coupling coefficient than a coil protected by a conducting material. Simulation in this work have also shown that the coupling coefficient decreases as operating frequencies increase. The ohmic losses in coils protected by an insulating envelope are greater than those in coils protected by a conductive material.
- 1 November 2024
- Published by IOP Publishing in Journal of Physics Communications
- Vol. 8 (11) , 115005
Open AccessImpact of coil envelope on the coupling coefficient in magnetic induction wireless power transmission systems
Research in the field of wireless energy transmission by magnetic induction has increased in recent years, due to the diversity of applications, such as medicine, electronics, and transport, that require this technology. Despite its maturity to date, this technology has struggled itself due to the short transmission distance and low coupling coefficient between the transmitting and receiving coils. These coils are usually protected by an envelope. However, the impact of the nature of the envelope on the coupling coefficient has not been studied. This work focuses on the impact of the nature of the coil protection envelope on the coupling coefficient. Three-dimensional flat spiral coils and the protective envelope are modeled and subjected to parametric analysis with variable air gaps and frequencies using ANSYS-Electronics Maxwell 2022 R1 software with the finite element method (FEM). Simulation results show that a coil protected by an insulating envelope has a higher coupling coefficient than a coil protected by a conducting material. Simulation in this work have also shown that the coupling coefficient decreases as operating frequencies increase. The ohmic losses in coils protected by an insulating envelope are greater than those in coils protected by a conductive material.
- Open Access
- 1 October 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (10)
Enhancing temperature and torque prediction in permanent magnet synchronous motors using deep learning neural networks and BiLSTM RNNs
This study aims to develop an effective method for predicting the temperature and torque of Permanent Magnet Synchronous Motors (PMSMs) using deep learning techniques, which is crucial for optimizing motor performance and ensuring longevity, particularly in the automotive industry. Various Neural Network (NN) architectures, including a Recurrent Neural Network (RNN) with a Bidirectional Long Short-Term Memory (BiLSTM) unit, were employed to model the complex relationships between motor parameters, such as stator winding, current, torque, and permanent magnet temperature. The findings demonstrate that an NN with two hidden layers (64 and 32 neurons) achieved an R2 score of 0.99 for both torque and temperature prediction, while the BiLSTM network effectively modeled temporal dynamics, leading to high-fidelity rotor temperature predictions. This research provides a novel application of BiLSTM RNNs in accurately predicting PMSM temperatures, offering valuable insights for industries reliant on these motors. Integrating these models into motor control systems can enhance operational efficiency, reduce overheating risks, and extend motor lifespan, contributing to energy savings and environmental sustainability by lowering energy consumption and reducing waste.
- 1 October 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (10)
Open AccessEnhancing temperature and torque prediction in permanent magnet synchronous motors using deep learning neural networks and BiLSTM RNNs
This study aims to develop an effective method for predicting the temperature and torque of Permanent Magnet Synchronous Motors (PMSMs) using deep learning techniques, which is crucial for optimizing motor performance and ensuring longevity, particularly in the automotive industry. Various Neural Network (NN) architectures, including a Recurrent Neural Network (RNN) with a Bidirectional Long Short-Term Memory (BiLSTM) unit, were employed to model the complex relationships between motor parameters, such as stator winding, current, torque, and permanent magnet temperature. The findings demonstrate that an NN with two hidden layers (64 and 32 neurons) achieved an R2 score of 0.99 for both torque and temperature prediction, while the BiLSTM network effectively modeled temporal dynamics, leading to high-fidelity rotor temperature predictions. This research provides a novel application of BiLSTM RNNs in accurately predicting PMSM temperatures, offering valuable insights for industries reliant on these motors. Integrating these models into motor control systems can enhance operational efficiency, reduce overheating risks, and extend motor lifespan, contributing to energy savings and environmental sustainability by lowering energy consumption and reducing waste.
- Open Access
- 1 September 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (9)
Design, simulation, and experimental validation of a wideband flexible metamaterial absorber for gigahertz electromagnetic waves
This study addresses the challenge of mitigating electromagnetic interference (EMI) in telecommunications and radar systems by designing, simulating, and experimentally validating a wideband flexible metamaterial absorber (MMA) for gigahertz-frequency electromagnetic waves (EMWs). EMI is critical as it can severely impact the performance and reliability of electronic systems. Traditional absorbers often struggle to maintain high performance across a broad frequency range, especially under varying polarization and incidence angles. To address this issue, we developed a novel MMA with a simple, single-layer design optimized for wideband absorption over a 10 GHz frequency range. Constructed with a polyethylene terephthalate dielectric layer separating spiral coil resonators from a bottom copper layer, this configuration ensures polarization insensitivity for both transverse electric and transverse magnetic waves. Numerical simulations were used to optimize the design parameters, focusing on maximizing absorption efficiency across the targeted frequency range and varying incidence angles. Experimental validation was conducted to verify the absorber’s performance, with results showing excellent agreement with simulations. This research underscores the importance of experimental verification in validating the performance of MMAs and highlights their potential for real-world applications in absorbing EMWs.
- 1 September 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (9)
Open AccessDesign, simulation, and experimental validation of a wideband flexible metamaterial absorber for gigahertz electromagnetic waves
This study addresses the challenge of mitigating electromagnetic interference (EMI) in telecommunications and radar systems by designing, simulating, and experimentally validating a wideband flexible metamaterial absorber (MMA) for gigahertz-frequency electromagnetic waves (EMWs). EMI is critical as it can severely impact the performance and reliability of electronic systems. Traditional absorbers often struggle to maintain high performance across a broad frequency range, especially under varying polarization and incidence angles. To address this issue, we developed a novel MMA with a simple, single-layer design optimized for wideband absorption over a 10 GHz frequency range. Constructed with a polyethylene terephthalate dielectric layer separating spiral coil resonators from a bottom copper layer, this configuration ensures polarization insensitivity for both transverse electric and transverse magnetic waves. Numerical simulations were used to optimize the design parameters, focusing on maximizing absorption efficiency across the targeted frequency range and varying incidence angles. Experimental validation was conducted to verify the absorber’s performance, with results showing excellent agreement with simulations. This research underscores the importance of experimental verification in validating the performance of MMAs and highlights their potential for real-world applications in absorbing EMWs.
- Open Access
- 26 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (9)
Anisotropic creep velocity of Dzyaloshinskii domain walls
We have measured the field-driven velocity of chiral Néel domain walls (DWs) stabilized by the Dzyaloshinskii–Moriya interaction (DMI) in a Pt/Co/Ta/Pt film with perpendicular magnetic anisotropy. A simple model based on the universal creep theory allows us to describe the anisotropic propagation of a DW along the contour of a bubble domain, driven by an out-of-plane field in the presence of a static in-plane field. This model is used to obtain the DMI constant from the measurement of the DW propagation with only one value of the in-plane field, simplifying the existing method relying on several measurements. The DMI constant extracted from the model is in good agreement with independent measurements.
- 26 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (9)
Open AccessAnisotropic creep velocity of Dzyaloshinskii domain walls
We have measured the field-driven velocity of chiral Néel domain walls (DWs) stabilized by the Dzyaloshinskii–Moriya interaction (DMI) in a Pt/Co/Ta/Pt film with perpendicular magnetic anisotropy. A simple model based on the universal creep theory allows us to describe the anisotropic propagation of a DW along the contour of a bubble domain, driven by an out-of-plane field in the presence of a static in-plane field. This model is used to obtain the DMI constant from the measurement of the DW propagation with only one value of the in-plane field, simplifying the existing method relying on several measurements. The DMI constant extracted from the model is in good agreement with independent measurements.
- Open Access
- 22 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Magnetic Simulation of a Thermomagnetic Motor Based on an Analytic Model
In this study, we present an analytical model for predicting the magnetic properties and optimization of thermomagnetic devices using mathematical models. The 3D analytical magnetic model is firstly validated by the dipole model and confirmed through experimentation, enabling to accurately estimate the magnetization of the used magnet. The stray field induced by the permanent magnet over the lateral surface of the rotor is computed. Then, the resultant force and torque are derived allowing to estimate the exact number of ferromagnetic active material required and their angular gap.
- 22 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessMagnetic Simulation of a Thermomagnetic Motor Based on an Analytic Model
In this study, we present an analytical model for predicting the magnetic properties and optimization of thermomagnetic devices using mathematical models. The 3D analytical magnetic model is firstly validated by the dipole model and confirmed through experimentation, enabling to accurately estimate the magnetization of the used magnet. The stray field induced by the permanent magnet over the lateral surface of the rotor is computed. Then, the resultant force and torque are derived allowing to estimate the exact number of ferromagnetic active material required and their angular gap.
- Open Access
- 1 February 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Thermal simulation and optimization of a Curie-based thermomagnetic motor harnessing concentrated solar energy
This work reports on a numerical study of a thermomagnetic motor with the active material being a Nickel (Ni) plate using the Curie effect. The main goal is to use thermal simulation and parameter optimization to increase the motor’s efficiency. With respect to beam width, heat exposure duration, and rotation frequency, the study focuses on multiparametric simulations of a thermomagnetic wheel exposed to a concentrated sun beam. An efficient configuration for real-world application is found using the finite element-based computational tool COMSOL Multiphysics. The outcomes show that, when taking into account n = 5 cycles, the ideal configuration displays parameter settings with the lowest quadratic deviation around the Curie temperature during the thermal excitation process and the lowest quadratic deviation around the ambient temperature during the thermal relaxation process. Furthermore, a cooling method is presented, which includes supporting the active material with an Aluminum (Al) heat sink. In order to speed up the remagnetization of the Curie wheel, this method seeks to decrease heat accumulation and regulate the deposited thermal flux on the Ni plate. We also found that the reduction in quadratic deviation is most pronounced between zAl = 1 mm and zAl = 2 mm. At zAl = 10 mm, the quadratic deviation achieves its lowest value (σθmin=5.65K) at the end of the thermal relaxation process. The results of this study will forward the design of a high-performance thermomagnetic motor for mechanical and electrical applications.
- 1 February 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Open AccessThermal simulation and optimization of a Curie-based thermomagnetic motor harnessing concentrated solar energy
This work reports on a numerical study of a thermomagnetic motor with the active material being a Nickel (Ni) plate using the Curie effect. The main goal is to use thermal simulation and parameter optimization to increase the motor’s efficiency. With respect to beam width, heat exposure duration, and rotation frequency, the study focuses on multiparametric simulations of a thermomagnetic wheel exposed to a concentrated sun beam. An efficient configuration for real-world application is found using the finite element-based computational tool COMSOL Multiphysics. The outcomes show that, when taking into account n = 5 cycles, the ideal configuration displays parameter settings with the lowest quadratic deviation around the Curie temperature during the thermal excitation process and the lowest quadratic deviation around the ambient temperature during the thermal relaxation process. Furthermore, a cooling method is presented, which includes supporting the active material with an Aluminum (Al) heat sink. In order to speed up the remagnetization of the Curie wheel, this method seeks to decrease heat accumulation and regulate the deposited thermal flux on the Ni plate. We also found that the reduction in quadratic deviation is most pronounced between zAl = 1 mm and zAl = 2 mm. At zAl = 10 mm, the quadratic deviation achieves its lowest value (σθmin=5.65K) at the end of the thermal relaxation process. The results of this study will forward the design of a high-performance thermomagnetic motor for mechanical and electrical applications.
- 5 January 2024
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 591
Improvement of magnetic domain wall dynamics by buffer layer annealing of Pt/Co/Pt
- 5 January 2024
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 591
Improvement of magnetic domain wall dynamics by buffer layer annealing of Pt/Co/Pt