Naycari Forfora
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Naycari Forfora has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Ronalds Gonzalez
North Carolina State University
6 shared publications - Richard A. Venditti
Department of Forest Biomaterials North Carolina State University Raleigh North Carolina USA
5 shared publications - Daniel Saloni
Department of Forest Biomaterials, College of Natural Resources, North Carolina State University, Raleigh, NC 27695, USA
4 shared publications Keren A. Vivas
4 shared publications- Ramon E. Vera
Department of Forest Biomaterials North Carolina State University Raleigh NC USA
4 shared publications - Ronald Marquez
University of Girona
3 shared publications
Latest Publications
- Open Access
- 20 April 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (8) , 4070
A Comparative Life Cycle Assessment of T-Shirt Production Using from Viscose, Lyocell, Cotton, and Polyester
This study presents the first cradle-to-gate life cycle assessment (LCA) of T-shirt production using viscose and Lyocell fibers, benchmarked against cotton and polyester under consistent system boundaries. The analysis covers spinning, knitting, wet processing, garment assembly, and regionalized energy supply. Results show that cotton T-shirts exhibit the lowest global warming potential (14.1 kg CO2eq/kg) but the highest water demand (2.9 m3/kg) in China. Polyester garments, although less water-intensive, contribute significantly to plastic accumulation (1.0 kg/kg shirt) compared to cellulose-based fibers (0.1 kg/kg shirt). Within man-made cellulose fibers, Lyocell generally outperforms viscose in toxicity-related categories—reducing freshwater ecotoxicity by 35% and human non-carcinogenic toxicity by 62%—thanks to its closed-loop solvent recovery. However, Lyocell also shows the highest carbon footprint (21.6 kg CO2eq/kg) unless produced in regions with cleaner energy mixes. Regional sensitivity analysis indicates that shifting production from China to Brazil could reduce global warming impacts by up to 38%. Overall, these results highlight the trade-offs across fiber types and demonstrate the importance of both material choice and production geography in driving sustainability within textile supply chains.
- 20 April 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (8) , 4070
Open AccessA Comparative Life Cycle Assessment of T-Shirt Production Using from Viscose, Lyocell, Cotton, and Polyester
This study presents the first cradle-to-gate life cycle assessment (LCA) of T-shirt production using viscose and Lyocell fibers, benchmarked against cotton and polyester under consistent system boundaries. The analysis covers spinning, knitting, wet processing, garment assembly, and regionalized energy supply. Results show that cotton T-shirts exhibit the lowest global warming potential (14.1 kg CO2eq/kg) but the highest water demand (2.9 m3/kg) in China. Polyester garments, although less water-intensive, contribute significantly to plastic accumulation (1.0 kg/kg shirt) compared to cellulose-based fibers (0.1 kg/kg shirt). Within man-made cellulose fibers, Lyocell generally outperforms viscose in toxicity-related categories—reducing freshwater ecotoxicity by 35% and human non-carcinogenic toxicity by 62%—thanks to its closed-loop solvent recovery. However, Lyocell also shows the highest carbon footprint (21.6 kg CO2eq/kg) unless produced in regions with cleaner energy mixes. Regional sensitivity analysis indicates that shifting production from China to Brazil could reduce global warming impacts by up to 38%. Overall, these results highlight the trade-offs across fiber types and demonstrate the importance of both material choice and production geography in driving sustainability within textile supply chains.
- Open Access
- 26 June 2024
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 18 (5) , 1565-1584
Understanding the potential of bamboo fibers in the USA: A comprehensive techno‐economic comparison of bamboo fiber production through mechanical and chemical processes
The growing interest in bamboo fibers for pulp, paper, and board production in the USA necessitates a comprehensive financial viability assessment. This study conducts a detailed technoeconomic analysis (TEA) of bamboo fiber production, primarily for the consumer hygiene tissue market although it is also applicable to other industrial uses. The economic viability of two pulping methods – alkaline peroxide mechanical pulping (APMP) and ammonium bisulfite chemical pulping (ABS) – was explored within three different pulp mill settings to supply pulp to two nonintegrated tissue and towel mills in South Carolina, USA. The target was to produce wet lap bamboo bleached pulp at 50% consistency and 70% ISO brightness. Despite higher initial capital invesment and operating costs, ABS achieved a lower minimum required selling price – USD 544 to 686 per bone dry metric ton (BDt = 1000 BDkg) – in comparison with USD 766 to 899 BDt−1 for APMP. This price advantage is partly due to an additional revenue stream (lignosulfonate byproduct), which not only boosts revenue but also circumvents the need for expensive chemical recovery systems. When compared with traditional kraft pulping, both methods require significantly lower capital investments, with minimum required selling prices (estimated to achieve 16% IRR) below current market rates for extensively used bleached kraft pulps in the USA tissue industry. The economic benefits derive from several factors: the low cost of bamboo as raw material, reduced capital needs for new pulping technologies, lower transportation costs from the pulp mill to tissue and towel manufacturing facilities, and the high market price of bleached kraft pulp.
- 26 June 2024
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 18 (5) , 1565-1584
Open AccessUnderstanding the potential of bamboo fibers in the USA: A comprehensive techno‐economic comparison of bamboo fiber production through mechanical and chemical processes
The growing interest in bamboo fibers for pulp, paper, and board production in the USA necessitates a comprehensive financial viability assessment. This study conducts a detailed technoeconomic analysis (TEA) of bamboo fiber production, primarily for the consumer hygiene tissue market although it is also applicable to other industrial uses. The economic viability of two pulping methods – alkaline peroxide mechanical pulping (APMP) and ammonium bisulfite chemical pulping (ABS) – was explored within three different pulp mill settings to supply pulp to two nonintegrated tissue and towel mills in South Carolina, USA. The target was to produce wet lap bamboo bleached pulp at 50% consistency and 70% ISO brightness. Despite higher initial capital invesment and operating costs, ABS achieved a lower minimum required selling price – USD 544 to 686 per bone dry metric ton (BDt = 1000 BDkg) – in comparison with USD 766 to 899 BDt−1 for APMP. This price advantage is partly due to an additional revenue stream (lignosulfonate byproduct), which not only boosts revenue but also circumvents the need for expensive chemical recovery systems. When compared with traditional kraft pulping, both methods require significantly lower capital investments, with minimum required selling prices (estimated to achieve 16% IRR) below current market rates for extensively used bleached kraft pulps in the USA tissue industry. The economic benefits derive from several factors: the low cost of bamboo as raw material, reduced capital needs for new pulping technologies, lower transportation costs from the pulp mill to tissue and towel manufacturing facilities, and the high market price of bleached kraft pulp.
- Open Access
- 10 June 2024
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 18 (5) , 1455-1474
An economic analysis of bamboo plantations and feedstock delivered cost in the Southern US for the manufacturing of fiber‐based bioproducts
Bamboo, recognized for its rapid growth, high yield, and fiber performance is prominent in the fiber‐based bioproduct industry. However, the absence of US industrial bamboo plantations for fiber production necessitates reliance on imports or locally manufactured products using imported bamboo fibers, predominantly from China. This study evaluates the economic viability of cultivating bamboo in the Southern US for fiber production, with a case study on hygiene tissue products. The supply‐chain analysis was assessed to calculate bamboo chips' minimum selling price (MSP) at the farm gate for an 8% internal rate of return (IRR). The MSP, influenced primarily by land rental costs, ranges from USD 48 to 55 per bone‐dry metric ton (BDt). Despite an initial establishment cost of ~USD 2 000 ha−1 and profitability by year 5, bamboo is a viable, long‐term fiber alternative. Successful bamboo cultivation in the US could lead to a more sustainable implementation of alternative non‐wood fibers for hygiene tissue applications.
- 10 June 2024
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 18 (5) , 1455-1474
Open AccessAn economic analysis of bamboo plantations and feedstock delivered cost in the Southern US for the manufacturing of fiber‐based bioproducts
Bamboo, recognized for its rapid growth, high yield, and fiber performance is prominent in the fiber‐based bioproduct industry. However, the absence of US industrial bamboo plantations for fiber production necessitates reliance on imports or locally manufactured products using imported bamboo fibers, predominantly from China. This study evaluates the economic viability of cultivating bamboo in the Southern US for fiber production, with a case study on hygiene tissue products. The supply‐chain analysis was assessed to calculate bamboo chips' minimum selling price (MSP) at the farm gate for an 8% internal rate of return (IRR). The MSP, influenced primarily by land rental costs, ranges from USD 48 to 55 per bone‐dry metric ton (BDt). Despite an initial establishment cost of ~USD 2 000 ha−1 and profitability by year 5, bamboo is a viable, long‐term fiber alternative. Successful bamboo cultivation in the US could lead to a more sustainable implementation of alternative non‐wood fibers for hygiene tissue applications.
- Open Access
A Multi-Criteria Approach for Quantifying the Impact of Global Megatrends on the Pulp and Paper Industry: Insights into Digitalization, Social Behavior Change, and Sustainability
Background: The pulp and paper industry (P&PI) is undergoing significant disruption driven by global megatrends that necessitate advanced tools for predicting future behavior and adapting strategies accordingly. Methods: This work utilizes a multi-criteria framework to quantify the effects of digitalization, changes in social behavior, and sustainability as three major megatrends transforming the P&PI industry, with a specific focus on hygiene tissue products. Thus, the research combines a comprehensive literature review, insights from a Delphi study, and topic modeling to qualitatively and quantitatively assess the present and future impacts of these global megatrends. Results: The findings suggest an urgent need to identify alternative raw materials to prevent potential supply chain disruptions. Moreover, due to shifts in social behavior, it becomes critical for businesses to substantiate their sustainability claims with hard data to avoid the risk of a “greenwashing” perception among consumers. Conclusions: This study provides decision support for strategic planning by highlighting actionable insights, quantitative predictions, and trend analysis, alongside the examination of consumer and market trends. It aims to incorporate diverse stakeholder perspectives and criteria into decision-making processes, thereby enriching the strategic planning and sustainability efforts within the P&PI industry.
Open AccessA Multi-Criteria Approach for Quantifying the Impact of Global Megatrends on the Pulp and Paper Industry: Insights into Digitalization, Social Behavior Change, and Sustainability
Background: The pulp and paper industry (P&PI) is undergoing significant disruption driven by global megatrends that necessitate advanced tools for predicting future behavior and adapting strategies accordingly. Methods: This work utilizes a multi-criteria framework to quantify the effects of digitalization, changes in social behavior, and sustainability as three major megatrends transforming the P&PI industry, with a specific focus on hygiene tissue products. Thus, the research combines a comprehensive literature review, insights from a Delphi study, and topic modeling to qualitatively and quantitatively assess the present and future impacts of these global megatrends. Results: The findings suggest an urgent need to identify alternative raw materials to prevent potential supply chain disruptions. Moreover, due to shifts in social behavior, it becomes critical for businesses to substantiate their sustainability claims with hard data to avoid the risk of a “greenwashing” perception among consumers. Conclusions: This study provides decision support for strategic planning by highlighting actionable insights, quantitative predictions, and trend analysis, alongside the examination of consumer and market trends. It aims to incorporate diverse stakeholder perspectives and criteria into decision-making processes, thereby enriching the strategic planning and sustainability efforts within the P&PI industry.
- 9 January 2024
- Published by Elsevier in Journal of Cleaner Production
- Vol. 439
Evaluating biomass sustainability: Why below-ground carbon sequestration matters
- 9 January 2024
- Published by Elsevier in Journal of Cleaner Production
- Vol. 439
Evaluating biomass sustainability: Why below-ground carbon sequestration matters