Mathieu Patin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mathieu Patin has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Sylvie Bégot
Université de Franche-Comté, FEMTO-ST Laboratory (C.N.R.S.), 14 Rue des Entrepreneurs, 90000 Belfort, France
3 shared publications - Valérie Lepiller
Université de Franche-Comté, FEMTO-ST Laboratory (C.N.R.S.), 14 Rue des Entrepreneurs, 90000 Belfort, France
3 shared publications Frédéric Gustin
2 shared publicationsDaniel R. Rousse
1 shared publication- Frédéric Gustin
Université de Franche-Comté, FEMTO-ST Laboratory (C.N.R.S.), 14 Rue des Entrepreneurs, 90000 Belfort, France
1 shared publication - Frédéric Gustin1 shared publication
Latest Publications
- Open Access
- 5 June 2026
- Published by Elsevier in Renewable Energy
- Vol. 271
Benchmarking control strategies for multi-stack electrolyzer systems under renewable energy variability
- 5 June 2026
- Published by Elsevier in Renewable Energy
- Vol. 271
Open AccessBenchmarking control strategies for multi-stack electrolyzer systems under renewable energy variability
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Étude des technologies de l'hydrogène-énergie appliquées aux bâtiments à faible impact carbone
Le bâtiment est un des secteurs les plus énergivores au niveau mondial. Pour répondre à la demande des bâtiments résidentiels de manière décarbonée, l’énergie photovoltaïque est couramment utilisée. Cependant, le déphasage temporel entre la production photovoltaïque et la demande des habitations entraîne des périodes de surproduction. Le travail présenté ici cherche à estimer le potentiel des systèmes hydrogène-énergie pour rentabiliser ce surplus d’énergie.Pour cela, un modèle pouvant modéliser des profils de charge électrique, thermique et de production photovoltaïque cohérents, continus et variés est implémenté, paramétré et amélioré. À partir de ce modèle, des charges sont générées pour des habitations actuelles et à faible impact carbone (passives). Ce programme est couplé avec une modélisation de système multi-énergies pouvant simuler le comportement énergétique et dynamique de ces composants pour plusieurs échelles, architectures et usages de l’hydrogène. Enfin, des critères énergétiques, économiques et environnementales (à travers les émissions sur le cycle de vie) issus de la modélisation sont utilisés dans une optimisation pour étudier les performances de chaque cas d’études et les tendances de dimensionnement du système multi-énergies.Dans le cadre de notre étude, les résultats montrent que les performances sont variables selon les critères observés, l’architecture étudiée et le mix énergétique du réseau auquel il est raccordé. Sur l’utilisation de l’hydrogène produit pour fournir de l’électricité et de la chaleur (power-to-power), le système se démarque par l’énergie renouvelable qu’il apporte, mais n’est pas compétitif en termes de coût et d’émission avec le réseau électrique français. Cependant, du côté des émissions sur le cycle de vie, le système est viable pour la majorité des mix énergétiques européens. Pour la production d’hydrogène pour de la vente (power-to-gas), l’hydrogène produit n’est pas compétitif économiquement, sans aide financière, alors qu’en terme d’émission sur le cycle de vie, la production peut concurrencer différents usages (transport, industrie, etc.). Enfin, quand utilisé en tant que source d’énergie pour le chauffage, l’hydrogène doit avoir été produit de façon fortement décarbonée pour concurrencer les pompes à chaleur.
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Étude des technologies de l'hydrogène-énergie appliquées aux bâtiments à faible impact carbone
Le bâtiment est un des secteurs les plus énergivores au niveau mondial. Pour répondre à la demande des bâtiments résidentiels de manière décarbonée, l’énergie photovoltaïque est couramment utilisée. Cependant, le déphasage temporel entre la production photovoltaïque et la demande des habitations entraîne des périodes de surproduction. Le travail présenté ici cherche à estimer le potentiel des systèmes hydrogène-énergie pour rentabiliser ce surplus d’énergie.Pour cela, un modèle pouvant modéliser des profils de charge électrique, thermique et de production photovoltaïque cohérents, continus et variés est implémenté, paramétré et amélioré. À partir de ce modèle, des charges sont générées pour des habitations actuelles et à faible impact carbone (passives). Ce programme est couplé avec une modélisation de système multi-énergies pouvant simuler le comportement énergétique et dynamique de ces composants pour plusieurs échelles, architectures et usages de l’hydrogène. Enfin, des critères énergétiques, économiques et environnementales (à travers les émissions sur le cycle de vie) issus de la modélisation sont utilisés dans une optimisation pour étudier les performances de chaque cas d’études et les tendances de dimensionnement du système multi-énergies.Dans le cadre de notre étude, les résultats montrent que les performances sont variables selon les critères observés, l’architecture étudiée et le mix énergétique du réseau auquel il est raccordé. Sur l’utilisation de l’hydrogène produit pour fournir de l’électricité et de la chaleur (power-to-power), le système se démarque par l’énergie renouvelable qu’il apporte, mais n’est pas compétitif en termes de coût et d’émission avec le réseau électrique français. Cependant, du côté des émissions sur le cycle de vie, le système est viable pour la majorité des mix énergétiques européens. Pour la production d’hydrogène pour de la vente (power-to-gas), l’hydrogène produit n’est pas compétitif économiquement, sans aide financière, alors qu’en terme d’émission sur le cycle de vie, la production peut concurrencer différents usages (transport, industrie, etc.). Enfin, quand utilisé en tant que source d’énergie pour le chauffage, l’hydrogène doit avoir été produit de façon fortement décarbonée pour concurrencer les pompes à chaleur.
- Open Access
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Multi-Objective Assessment of Hydrogen Energy Systems for Residential PV Integration in Power-to-Power and Power-to-Gas Applications
The building sector is one of the most energy-intensive sectors globally, and photovoltaic (PV) energy is widely adopted to meet residential energy demand in a low-carbon manner. However, the mismatch between PV production and household demand often leads to periods of surplus energy. This study aims to evaluate the potential of hydrogen-based energy systems to capitalize on this excess energy. To achieve this, a model that generates consistent, continuous, and diverse electrical and thermal load profiles for low-carbon residential buildings is coupled with a multi-energy system simulation. The simulation computes the performance of hydrogen components for different hydrogen utilization (Power-to-Power and Power-to-Gas) and energy mix configurations. The systems' energy, economic, and emission performance are analyzed using a multi-objective optimization process to evaluate their competitiveness and identify optimal sizing strategies. The results show that system performance varies significantly depending on the criteria, usage, and energy mix of the electrical grid. For Power-to-Power applications (using hydrogen to produce electricity and heat), the system excels in providing renewable energy but is not cost-competitive with the French electricity grid, nor does it significantly reduce emissions. However, it proves competitive in terms of life-cycle emissions considering most European energy mixes. For Power-to-Gas applications (producing hydrogen for sale), the hydrogen production is not economically competitive without subsidies but shows potential for reducing emissions, especially in carbon-intensive sectors like transport and industry.
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMulti-Objective Assessment of Hydrogen Energy Systems for Residential PV Integration in Power-to-Power and Power-to-Gas Applications
The building sector is one of the most energy-intensive sectors globally, and photovoltaic (PV) energy is widely adopted to meet residential energy demand in a low-carbon manner. However, the mismatch between PV production and household demand often leads to periods of surplus energy. This study aims to evaluate the potential of hydrogen-based energy systems to capitalize on this excess energy. To achieve this, a model that generates consistent, continuous, and diverse electrical and thermal load profiles for low-carbon residential buildings is coupled with a multi-energy system simulation. The simulation computes the performance of hydrogen components for different hydrogen utilization (Power-to-Power and Power-to-Gas) and energy mix configurations. The systems' energy, economic, and emission performance are analyzed using a multi-objective optimization process to evaluate their competitiveness and identify optimal sizing strategies. The results show that system performance varies significantly depending on the criteria, usage, and energy mix of the electrical grid. For Power-to-Power applications (using hydrogen to produce electricity and heat), the system excels in providing renewable energy but is not cost-competitive with the French electricity grid, nor does it significantly reduce emissions. However, it proves competitive in terms of life-cycle emissions considering most European energy mixes. For Power-to-Gas applications (producing hydrogen for sale), the hydrogen production is not economically competitive without subsidies but shows potential for reducing emissions, especially in carbon-intensive sectors like transport and industry.
- Open Access
Investment Opportunities for Individual Energy Supply Systems: A UK Household Study
The current evolution of the energy context and progress in sustainable energy technologies are enabling the development of new energy supply systems for the residential sector. However, the techno-economic assessment of such energy systems is not straightforward and depends, among others, on the building type, its thermal insulation rate, and user patterns, as well as on the climatic conditions or energy and technology prices. This study therefore aims to develop an investment model for a typical UK household energy system that is applied to a diversity of scenarios to highlight the sensibility of the output results over stochastic input data such as electricity and heat demands, ambient temperature, and global solar irradiation. This dwelling diversity dataset is generated using a thermal–electrical demand model that uses stochastic techniques to model uncertainty. This contribution concludes with a discussion on how end-users can effectively take part in the energy transition while minimizing their energy bill and potentially generate long-term revenues. The main results show stable economic performance, with capital expenditure (CAPEX) ranging from GBP 15,400 to GBP 17,000 and NPV from GBP 21,000 to GBP 26,000 over 2000 individual scenarios. This study also confirms the leveraging effect of policy instruments, such as subsidies, in shifting the optimal system design towards higher shares of renewable and storage technologies, further reducing the reliance on fossil fuels and the impact on distribution systems.
Open AccessInvestment Opportunities for Individual Energy Supply Systems: A UK Household Study
The current evolution of the energy context and progress in sustainable energy technologies are enabling the development of new energy supply systems for the residential sector. However, the techno-economic assessment of such energy systems is not straightforward and depends, among others, on the building type, its thermal insulation rate, and user patterns, as well as on the climatic conditions or energy and technology prices. This study therefore aims to develop an investment model for a typical UK household energy system that is applied to a diversity of scenarios to highlight the sensibility of the output results over stochastic input data such as electricity and heat demands, ambient temperature, and global solar irradiation. This dwelling diversity dataset is generated using a thermal–electrical demand model that uses stochastic techniques to model uncertainty. This contribution concludes with a discussion on how end-users can effectively take part in the energy transition while minimizing their energy bill and potentially generate long-term revenues. The main results show stable economic performance, with capital expenditure (CAPEX) ranging from GBP 15,400 to GBP 17,000 and NPV from GBP 21,000 to GBP 26,000 over 2000 individual scenarios. This study also confirms the leveraging effect of policy instruments, such as subsidies, in shifting the optimal system design towards higher shares of renewable and storage technologies, further reducing the reliance on fossil fuels and the impact on distribution systems.
- Open Access
- 28 December 2024
- Published by Elsevier in Energy and Buildings
- Vol. 328
Optimizing economic performances of foundation earth-to-air heat exchangers for low-technology residential air-conditioning
- 28 December 2024
- Published by Elsevier in Energy and Buildings
- Vol. 328
Open AccessOptimizing economic performances of foundation earth-to-air heat exchangers for low-technology residential air-conditioning
- 3 January 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 67, 875-887
Enhancing Residential Sustainability: Multi-objective optimization of hydrogen-based multi-energy system
- 3 January 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 67, 875-887
Enhancing Residential Sustainability: Multi-objective optimization of hydrogen-based multi-energy system