Yuan Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuan Liu has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Chuang Liu
The National Key Laboratory of Water Disaster Prevention, Nanjing Hydraulic Research Institute, Nanjing 210029, China
2 shared publications - Lei Yu
Nanjing Hydraulic Research Institute, Nanjing 210029, China
2 shared publications - Luchen Zhang
The National Key Laboratory of Water Disaster Prevention, Nanjing Hydraulic Research Institute, Nanjing 210029, China
2 shared publications - Bin Lu
The National Key Laboratory of Water Disaster Prevention, Nanjing Hydraulic Research Institute, Nanjing 210029, China
1 shared publication - Hezuo Zhang
Power China Guiyang Engineering Corporation Limited, Guiyang 550081, China
1 shared publication - Jiaxiu Yang
Power China Guiyang Engineering Corporation Limited, Guiyang 550081, China
1 shared publication
Latest Publications
- Open Access
Study on Threshold Values of Safety Control Indicators for Rapid Drawdown of 200~300 m High Earth-Rockfill Dams
High dams and large reservoirs serve flood control, power generation, water supply and ecological security, where rapid safe drawdown is vital for emergency handling and long-term safe operation. Targeting undefined rapid drawdown control standards for over-200 m ultra-high earth-rockfill dams, this study selects 200 m, 250 m and 300 m earth core rockfill dams for finite element calculations of transient unsaturated seepage and slope stability under varying drawdown rates. It analyzes how drawdown rate, drawdown depth and dam height affect dam safety, and tests the sensitivity of rockfill shear strength indices. Results reveal rapid drawdown produces prominent phreatic line lag, which worsens with faster drawdown and taller dams. Slope safety factors fall then rise during water level decline with a critical minimum, and taller dams respond more sensitively to drawdown rate. The allowable drawdown limits are 10 m/d, 8 m/d and 6 m/d for 200 m, 250 m and 300 m dams, paired with maximum safe drawdown depths of 108 m, 140.4 m and 154.8 m. Rockfill cohesion c is highly sensitive at 0–40 kPa; each 2° rise in internal friction angle φ lifts the safety factor by roughly 7.3%. The findings offer theoretical and technical references for drawdown facility design and emergency regulation of reservoirs with dams exceeding 200 m.
Open AccessStudy on Threshold Values of Safety Control Indicators for Rapid Drawdown of 200~300 m High Earth-Rockfill Dams
High dams and large reservoirs serve flood control, power generation, water supply and ecological security, where rapid safe drawdown is vital for emergency handling and long-term safe operation. Targeting undefined rapid drawdown control standards for over-200 m ultra-high earth-rockfill dams, this study selects 200 m, 250 m and 300 m earth core rockfill dams for finite element calculations of transient unsaturated seepage and slope stability under varying drawdown rates. It analyzes how drawdown rate, drawdown depth and dam height affect dam safety, and tests the sensitivity of rockfill shear strength indices. Results reveal rapid drawdown produces prominent phreatic line lag, which worsens with faster drawdown and taller dams. Slope safety factors fall then rise during water level decline with a critical minimum, and taller dams respond more sensitively to drawdown rate. The allowable drawdown limits are 10 m/d, 8 m/d and 6 m/d for 200 m, 250 m and 300 m dams, paired with maximum safe drawdown depths of 108 m, 140.4 m and 154.8 m. Rockfill cohesion c is highly sensitive at 0–40 kPa; each 2° rise in internal friction angle φ lifts the safety factor by roughly 7.3%. The findings offer theoretical and technical references for drawdown facility design and emergency regulation of reservoirs with dams exceeding 200 m.
- Open Access
The Impact of Decreased Atmospheric Pressure on Forced Aeration of Discharged Flow
To account for changes in the performance of spillway aerator structures of high-altitude dams, depressurization generalized model experiments and theoretical analyses were conducted in this study. Measurements were taken for ventilation hole air velocity, cavity subpressure, cavity length, and air concentration in crucial regions. The study proposed correction formulas for the aeration coefficient and water air concentration in aerator devices operating under low atmospheric pressure. The pressure range of the experiments was between 26.3 kPa and 101.3 kPa. The results indicated that with decreasing atmospheric pressure, ventilation hole air velocity, ventilation volume, cavity subpressure, and water air concentration all showed a decreasing trend. For every 15 kPa decrease in pressure, ventilation hole air velocity decreased by approximately 24%. When the atmospheric pressure dropped from 101.3 kPa to 26.3 kPa, the cavity subpressure decreased and eventually approached zero. The maximum reduction in air concentration was 14.9% in the cavity backwater area, 38.5% at the cavity end, and 38.3% in the downstream bubble escape segment. The proposed correction formulas could be used for a rapid estimation of ventilation volume and air concentration in low-pressure environments. This research provides a scientific basis for the design of aeration devices in water projects located in high-altitude regions.
Open AccessThe Impact of Decreased Atmospheric Pressure on Forced Aeration of Discharged Flow
To account for changes in the performance of spillway aerator structures of high-altitude dams, depressurization generalized model experiments and theoretical analyses were conducted in this study. Measurements were taken for ventilation hole air velocity, cavity subpressure, cavity length, and air concentration in crucial regions. The study proposed correction formulas for the aeration coefficient and water air concentration in aerator devices operating under low atmospheric pressure. The pressure range of the experiments was between 26.3 kPa and 101.3 kPa. The results indicated that with decreasing atmospheric pressure, ventilation hole air velocity, ventilation volume, cavity subpressure, and water air concentration all showed a decreasing trend. For every 15 kPa decrease in pressure, ventilation hole air velocity decreased by approximately 24%. When the atmospheric pressure dropped from 101.3 kPa to 26.3 kPa, the cavity subpressure decreased and eventually approached zero. The maximum reduction in air concentration was 14.9% in the cavity backwater area, 38.5% at the cavity end, and 38.3% in the downstream bubble escape segment. The proposed correction formulas could be used for a rapid estimation of ventilation volume and air concentration in low-pressure environments. This research provides a scientific basis for the design of aeration devices in water projects located in high-altitude regions.