LFLilli Frison

Lilli Frison

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lilli Frison has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Uncertainty-aware day-ahead thermal-load forecasting in expanding district heating networks with attention-enhanced encoder-decoder LSTM

    by Lilli Frison, Theda Zoschke, Simon Gölzhäuser, Gregor Rohbogner

    Reliable day-ahead thermal-load forecasts with quantified uncertainty can support risk-aware control decisions and reduce unnecessary safety margins. This paper applies an Attention-Encoder-Decoder Long Short-Term Memory (AEDL) architecture with direct multi-horizon decoding to rolling 24-hour-ahead thermal-load forecasting and compares three variants: deterministic AEDL, Gaussian-AEDL, and Quantile-AEDL. Gaussian-AEDL predicts a parametric Gaussian distribution, while Quantile-AEDL predicts non-parametric quantile levels. Two AEDL versions handle the growing load: version A scales the load of each input window, and version B adds a linear shortcut from the load of the last 24 h. The methods are evaluated on data from an expanding district heating network in Germany, using two rolling test periods that cover six months. Using the weather forecasts available at each forecast origin as inputs over the 24 h forecast horizon, the mean absolute percentage error (MAPE) ranges from 6.95 to 7.10%. Both versions outperform seasonal-naive, LSTM, and Temporal Fusion Transformer (TFT) baselines. Compared with TFT, they reduce the point-forecast error by 4 to 6% at about a quarter of the computational cost. Gaussian-AEDL achieves the lowest calibrated continuous ranked probability score (CRPS) of 161 kW, compared with 166 kW for Quantile-AEDL. Validation-based calibration raises central 80% interval coverage to 77 to 78%. Without weather forecasts, the forecast errors increase by 16 to 27%. Overall, the results show that probabilistic AEDL models retain point-forecast accuracy while providing useful uncertainty information, but their prediction intervals require calibration before operational use.

  • Open Access

    HAR-ASIC: A Configurable Edge-AI Human Activity Recognition Circuit for Ultra-Low Power Wearable Devices

    by Tobias Peikenkamp, Daniel Konegen, Jacob Göppert, Alexander Bleitner, Lilli Frison, Thorsten Hehn, Axel Sikora, Oliver Amft

    We present an application-specific integrated circuit (ASIC) using digital hardware design to maximise energy-efficiency of human activity recognition (HAR) in autonomous wearable devices. The HAR-ASIC was designed in 22 nm technology and includes a battery of configurable, hardware-optimised feature extraction functions along with a decision tree ensemble classifier, thus serving as an edge AI device for local sensor data processing. We validate the HAR-ASIC based on post-layout process data with five HAR datasets and show the design scalability for configurations to maximise energy saving and others to maximise recognition performance. We show that feature extraction often requires up to 100 times more energy than the classification function. Our configuration analysis shows that feature extraction energy consumption can be reduced by factors of two to five, with at most 3% loss in F1-score, depending on the dataset. Across all datasets, feature extraction and classification energy was between 64 and 678 nJ per inference for Pareto-optimal configurations using sliding window buffers of up to 512 samples. We conclude that the highly configurable HAR-ASIC design could be the basis to realise ultra-low power sensor-edge AI systems for continuous wearable HAR and possibly further edge AI applications.

  • Open Access

    Laboratory and season-long field evaluation of AI-based predictive control for residential heat pumps in DHW and space-heating operation

    by Lilli Frison, Simon Gölzhäuser, Etienne Ouss, Hugues Bosche, Marina Reyboz, Aurore Lomet, Nicolas Rehault, Martial Mermillod, Manon Dampfhoffer, Malte Vahlenkamp

    Residential heat pumps are commonly controlled using static rule-based controllers such as fixed heating curves and hysteresis-based DHW control, which can lead to unnecessary temperature lifts and avoidable storage losses as building and occupancy conditions change. This paper presents two AI-enabled predictive control strategies for (i) DHW production and (ii) space-heating supply-temperature control. In both cases, forecasting/modeling and optimization are separated to facilitate implementation. For DHW, a learned demand forecast is combined with Modelica-based simulation-in-the-loop scheduling that minimizes electrical energy while enforcing service constraints. Laboratory experiments show reductions in electrical energy use of 5-8% for an individual-housing configuration and 38-43% for a collective-housing configuration, together with a substantial increase in the heat-pump coefficient of performance (COP). For space heating, an attention-augmented encoder-decoder LSTM temperature predictor is embedded in a fast surrogate-assisted receding-horizon controller. A field trial in one residential building during the 2024-2025 heating season showed an 8% reduction in daily electricity use, an increase in mean COP from 3.95 to 4.15, and a reduction in mean absolute comfort deviation from 0.3 to 0.1 K. The results demonstrate that forecast-informed optimization can improve heat-pump efficiency while maintaining comfort, although broader field validation across building types and climates remains necessary.

  • Open Access

    Development and field evaluation of AI-driven adaptive control algorithms for enhancing residential heat pump efficiency

    by Lilli Frison, Simon Gölzhäuser, Etienne Ouss, Hugues Bosche, Manon Dampfhoffer, Marina Reyboz, Aurore Lomet, Malte Vahlenkamp, Nicolas Rehault, Martial Mermillod

    Residential heat pumps are commonly controlled using static rule-based controllers such as fixed heating curves and hysteresis-based DHW control, which can lead to unnecessary temperature lifts and avoidable storage losses as building and occupancy conditions change. This paper presents two AI-enabled predictive control strategies for (i) DHW production and (ii) space-heating supply-temperature control. In both cases, forecasting/modeling and optimization are separated to facilitate implementation. For DHW, a learned demand forecast is combined with Modelica-based simulation-in-the-loop scheduling that minimizes electrical energy while enforcing service constraints. Laboratory experiments show reductions in electrical energy use of 5-8% for an individual-housing configuration and 38-43% for a collective-housing configuration, together with a substantial increase in the heat-pump coefficient of performance (COP). For space heating, an attention-augmented encoder-decoder LSTM temperature predictor is embedded in a fast surrogate-assisted receding-horizon controller. A field trial in one residential building during the 2024-2025 heating season showed an 8% reduction in daily electricity use, an increase in mean COP from 3.95 to 4.15, and a reduction in mean absolute comfort deviation from 0.3 to 0.1 K. The results demonstrate that forecast-informed optimization can improve heat-pump efficiency while maintaining comfort, although broader field validation across building types and climates remains necessary.

  • Open Access

    Presentation of a distributed testing infrastructure for joint experiments across multiple remote laboratories for robust development of new district heating concepts

    by Lilli Frison, Urs Gumbel, Simone Steiger, Herbert Sinnesbichler, Benedikt Ahrens, Dennis Lottis, Matthias Wecker, Anna Marie Cadenbach


  • Open Access

    Evaluating different artificial neural network forecasting approaches for optimizing district heating network operation

    by Lilli Frison, Simon Gölzhäuser, Moritz Bitterling, Wolfgang Kramer


  • Open Access

    Model predictive control of bidirectional heat transfer in prosumer-based solar district heating networks

    by Lilli Frison, Manuel Kollmar, Axel Oliva, Adrian Bürger, Moritz Diehl


  • Open Access

    Model-predictive control for testing energy flexible heat pump operation within a Hardware-in-the-Loop setting

    by Lilli Frison, Martin Kleinstück, Peter Engelmann

    Model-predictive control is a smart control technique that can unlock the potential of the building’s thermal production leading to improvements in energy efficiency or energy flexibility, which is obtained by a demand responsive operation based on external grid signals. This work explains the set-up of a Hardware-in-the-Loop experiment to test an energy flexible heat pump controller under realistic conditions. The developed simple, low-cost model-predictive control algorithm can easily be integrated with a traditional heat pump controller.