Akbar Hussain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Akbar Hussain has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Muhammad Asim
Department of Chemistry Quaid-i-Azam University 45320 Islamabad Pakistan
11 shared publications - Naveed Kausar Janjua
Department of Chemistry, Quaid-i-Azam University, Islamabad, Pakistan
10 shared publications - Ayşe Bayrakçeken Yurtcan
Chemical Engineering Department, Ataturk University, Erzurum, Turkey
5 shared publications Asadullah Dawood
4 shared publications- Meryem Samancı
Department of Chemical Engineering, Faculty of Engineering, Atatürk University, Erzurum, Turkiye
4 shared publications Muhammad Asim
3 shared publications
Latest Publications
- 26 October 2026
- Published by Springer Nature in Journal of Fluorescence
- p. 1-18
Advances in Organosilicon Fluorescent Materials: From Fundamental Chemistry to Technological Frontiers
Organosilicon fluorescent materials have emerged as a remarkable innovation in the rapidly evolving field of material science, serving as a bridge between fundamental chemistry and cutting-edge applications. This review explores the transformative potential of these materials across various domains, highlighting their unique fluorescence properties and synthesis techniques. Their impact spans optoelectronics, medical diagnostics, and beyond, from enhancing biological imaging accuracy to advancing chemical sensing technologies. Additionally, key challenges such as stability, durability, and biocompatibility are examined in the context of industrial applications. We also explore their promising roles in advanced materials research, offering insights into future directions that may shape the next frontier of organosilicon fluorescence. By providing this comprehensive overview, we aim to deepen understanding and broaden the application of these extraordinary materials, facilitating their continued success in technological innovation. Graphical Abstract
- 26 October 2026
- Published by Springer Nature in Journal of Fluorescence
- p. 1-18
Advances in Organosilicon Fluorescent Materials: From Fundamental Chemistry to Technological Frontiers
Organosilicon fluorescent materials have emerged as a remarkable innovation in the rapidly evolving field of material science, serving as a bridge between fundamental chemistry and cutting-edge applications. This review explores the transformative potential of these materials across various domains, highlighting their unique fluorescence properties and synthesis techniques. Their impact spans optoelectronics, medical diagnostics, and beyond, from enhancing biological imaging accuracy to advancing chemical sensing technologies. Additionally, key challenges such as stability, durability, and biocompatibility are examined in the context of industrial applications. We also explore their promising roles in advanced materials research, offering insights into future directions that may shape the next frontier of organosilicon fluorescence. By providing this comprehensive overview, we aim to deepen understanding and broaden the application of these extraordinary materials, facilitating their continued success in technological innovation. Graphical Abstract
- 8 October 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1082
Non-aqueous sol-gel synthesis and water splitting applications of lithium metal phosphate nanomaterials
- 8 October 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1082
Non-aqueous sol-gel synthesis and water splitting applications of lithium metal phosphate nanomaterials
- 29 September 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1082
Ni-doped LiFePO₄ as an efficient bifunctional electrocatalyst for alkaline water splitting: Thermodynamic and kinetic insights
- 29 September 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1082
Ni-doped LiFePO₄ as an efficient bifunctional electrocatalyst for alkaline water splitting: Thermodynamic and kinetic insights
- Open Access
- 6 March 2026
- Published by Academic Publishing Pte. Ltd. in Materials Technology Reports
- Vol. 4 (1)
Exploring the effect of graphite-coating on hexanary high entropy metal oxides towards efficient water electrocatalysis
High-entropy oxides (HEOs) have emerged as promising electrocatalysts due to their high configurational entropy, modular electronic structures, and defect-rich multicationic lattices. However, modifying their electrochemical kinetics through conductive surface modification remains completely unknown. An Al-rich hexanary spinel, Cr, Cd, Fe, Mg, and Mn-based materials were synthesized using a sol-gel method and then modified with graphite (5–20 wt%) via rotary ball milling to improve conductivity and interfacial charge transfer, resulting in a stable spinel phase as validated by Rietveld-refined XRD. The addition of graphite significantly increased anodic activity, with the 10 wt% composite (HEO-10C) achieving a peak current density of 47.09 mA cm−2 in 1 M KOH + methanol. This was followed by decreased charge-transfer resistance and better electron-transfer kinetics. The graphite-HEO interface allows for faster reaction pathways, as evidenced by a high diffusion coefficient (8.65 × 10−8 cm2 s−1), a heterogeneous electron-transfer rate constant (3.75 × 10−4 cm s−1), and a low Tafel slope of 97 mV dec−1. To better measure intrinsic activity, we add a new descriptor, Jη = (Jₚ (peak current density)−Jₒₙₛₑₜ (onset current density)), which represents the net operating current above onset. Jη correlates strongly with traditional kinetic measurements, highlighting the conductivity-driven performance gain in HEO-10C (44.59 mA cm−2), which is about 1.6× greater than the uncoated HEO. These findings confirm graphite coating as a viable method for modifying multication HEO electrodynamics and introduce a new measure for assessing advanced oxide-based electrocatalysts.
- 6 March 2026
- Published by Academic Publishing Pte. Ltd. in Materials Technology Reports
- Vol. 4 (1)
Open AccessExploring the effect of graphite-coating on hexanary high entropy metal oxides towards efficient water electrocatalysis
High-entropy oxides (HEOs) have emerged as promising electrocatalysts due to their high configurational entropy, modular electronic structures, and defect-rich multicationic lattices. However, modifying their electrochemical kinetics through conductive surface modification remains completely unknown. An Al-rich hexanary spinel, Cr, Cd, Fe, Mg, and Mn-based materials were synthesized using a sol-gel method and then modified with graphite (5–20 wt%) via rotary ball milling to improve conductivity and interfacial charge transfer, resulting in a stable spinel phase as validated by Rietveld-refined XRD. The addition of graphite significantly increased anodic activity, with the 10 wt% composite (HEO-10C) achieving a peak current density of 47.09 mA cm−2 in 1 M KOH + methanol. This was followed by decreased charge-transfer resistance and better electron-transfer kinetics. The graphite-HEO interface allows for faster reaction pathways, as evidenced by a high diffusion coefficient (8.65 × 10−8 cm2 s−1), a heterogeneous electron-transfer rate constant (3.75 × 10−4 cm s−1), and a low Tafel slope of 97 mV dec−1. To better measure intrinsic activity, we add a new descriptor, Jη = (Jₚ (peak current density)−Jₒₙₛₑₜ (onset current density)), which represents the net operating current above onset. Jη correlates strongly with traditional kinetic measurements, highlighting the conductivity-driven performance gain in HEO-10C (44.59 mA cm−2), which is about 1.6× greater than the uncoated HEO. These findings confirm graphite coating as a viable method for modifying multication HEO electrodynamics and introduce a new measure for assessing advanced oxide-based electrocatalysts.
- Open Access
- 7 November 2025
- Published by LIDSEN Publishing Inc in Catalysis Research
- Vol. 05 (04) , 1-27
Fabrication of CuO-Decorated Fe2O3 Nanoparticles as Efficient and Durable Electrocatalyst for Oxygen Evolution Reaction
The electrochemical water oxidation application of CuO@Fe2O3 materials as potential catalysts is being reported for the first time. A series of CuO@Fe2O3 with different molar ratios of CuO (5, 7, 10, 12, and 15%) was fabricated through precipitation followed by the impregnation method. Structural and electrochemical studies were carried out by using different analytical platforms, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS), Cyclic voltammetry (CV), Linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). Synthesized materials were used as catalytic supports for electrochemical water splitting in alkaline media. The XRD pattern confirmed the formation of rhombohedral crystal structure in all CuO@Fe2O3 nanomaterials, and FTIR analysis showed the phase purity and metal oxygen bond formation below 800 cm-1. The electrochemical explorations showed that when Fe2O3 was combined with CuO, the electrocatalytic activity towards oxygen evolution reaction (OER) was improved in all compositions. OER catalysis indicated that CuO@Fe2O3 composite containing 10 wt% of CuO (CuFe-10) reaches optimal OER activity with high current density (J, 38.8 mAcm-2), high active surface area (A, 0.87 cm-2), slight Tafel slope (TS, 143 mVdec-1), low charge transfer resistance (Rct, 22.4 Ω), highest diffusion co-efficient (D°, 3.5 × 10-8 cm2s-1), mass transport co-efficient (mt, 3.6 × 10-4 cms-1), heterogenous rate constant (k°, 4.3 × 10-4 cms-1). In addition, all the composite electrocatalysts showed high stability, selectivity, and applicability for electrochemical water oxidation. In conclusion, the synergistic effects between CuO and Fe2O3 increase the number of active catalytic sites and help rapid charge transfer at the electrode/electrolyte interface, and hence, promote the electrocatalytic OER activity.
- 7 November 2025
- Published by LIDSEN Publishing Inc in Catalysis Research
- Vol. 05 (04) , 1-27
Open AccessFabrication of CuO-Decorated Fe2O3 Nanoparticles as Efficient and Durable Electrocatalyst for Oxygen Evolution Reaction
The electrochemical water oxidation application of CuO@Fe2O3 materials as potential catalysts is being reported for the first time. A series of CuO@Fe2O3 with different molar ratios of CuO (5, 7, 10, 12, and 15%) was fabricated through precipitation followed by the impregnation method. Structural and electrochemical studies were carried out by using different analytical platforms, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS), Cyclic voltammetry (CV), Linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). Synthesized materials were used as catalytic supports for electrochemical water splitting in alkaline media. The XRD pattern confirmed the formation of rhombohedral crystal structure in all CuO@Fe2O3 nanomaterials, and FTIR analysis showed the phase purity and metal oxygen bond formation below 800 cm-1. The electrochemical explorations showed that when Fe2O3 was combined with CuO, the electrocatalytic activity towards oxygen evolution reaction (OER) was improved in all compositions. OER catalysis indicated that CuO@Fe2O3 composite containing 10 wt% of CuO (CuFe-10) reaches optimal OER activity with high current density (J, 38.8 mAcm-2), high active surface area (A, 0.87 cm-2), slight Tafel slope (TS, 143 mVdec-1), low charge transfer resistance (Rct, 22.4 Ω), highest diffusion co-efficient (D°, 3.5 × 10-8 cm2s-1), mass transport co-efficient (mt, 3.6 × 10-4 cms-1), heterogenous rate constant (k°, 4.3 × 10-4 cms-1). In addition, all the composite electrocatalysts showed high stability, selectivity, and applicability for electrochemical water oxidation. In conclusion, the synergistic effects between CuO and Fe2O3 increase the number of active catalytic sites and help rapid charge transfer at the electrode/electrolyte interface, and hence, promote the electrocatalytic OER activity.
- Open Access
- 22 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (39) , 54749-54760
Synthesis of Hollow Spherical Phosphide Catalysts with Industrial-Scale Potential for Alkaline Hydrogen Evolution Reaction
The competitiveness of hydrogen as a fuel of the future relies on the development of low-cost, readily available, and efficient catalysts. Transition metal phosphides (TMP), mainly in multimetallic compositions, are recognized as an excellent alternative to platinum-based catalysts in electrolyzers and fuel cells. Herein, for the first time, the connection of the spray drying method as a user-friendly technique for the large-scale production of TMP as hydrogen evolution reaction (HER) catalysts is presented. Three types of catalysts based on MoFeP modified with Co and Ni as third elements were compared by electrochemical methods in an alkaline medium of 1 M KOH. Among the studied materials, the as-prepared MoFeCoP electrocatalysts exhibited the lowest reaction overpotentials (η10) of -285 mV, with Tafel slopes of 83 mV dec-1, low activation energy for the HER and sufficient durability in long-term stability tests. The high value of differential capacitance for both trimetallic materials MoFeNiP and MoFeCoP indicates a large surface area, resulting in excellent features for hydrogen production and application.
- 22 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (39) , 54749-54760
Open AccessSynthesis of Hollow Spherical Phosphide Catalysts with Industrial-Scale Potential for Alkaline Hydrogen Evolution Reaction
The competitiveness of hydrogen as a fuel of the future relies on the development of low-cost, readily available, and efficient catalysts. Transition metal phosphides (TMP), mainly in multimetallic compositions, are recognized as an excellent alternative to platinum-based catalysts in electrolyzers and fuel cells. Herein, for the first time, the connection of the spray drying method as a user-friendly technique for the large-scale production of TMP as hydrogen evolution reaction (HER) catalysts is presented. Three types of catalysts based on MoFeP modified with Co and Ni as third elements were compared by electrochemical methods in an alkaline medium of 1 M KOH. Among the studied materials, the as-prepared MoFeCoP electrocatalysts exhibited the lowest reaction overpotentials (η10) of -285 mV, with Tafel slopes of 83 mV dec-1, low activation energy for the HER and sufficient durability in long-term stability tests. The high value of differential capacitance for both trimetallic materials MoFeNiP and MoFeCoP indicates a large surface area, resulting in excellent features for hydrogen production and application.