Antonio Maisto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Antonio Maisto has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Wim De Malsche
µFlow group, Department of Chemical Engineering, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium
7 shared publications - Denys Makarov
Helmholtz‐Zentrum Dresden‐Rossendorf e.V. Institute of Ion Beam Physics and Materials Research Dresden Germany
2 shared publications - Han Gardeniers
University of Twente P.O. Box 217
2 shared publications - Larysa Baraban
Institute of Radiopharmaceutical Cancer Research Helmholtz‐Zentrum Dresden‐Rossendorf Dresden Germany
2 shared publications - Lisa Marie Benko
µFlow group, Department of Chemical Engineering, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium
2 shared publications - Mehrnaz Hashemiesfahan
µFlow Group, Department of Chemical Engineering, Vrije Universiteit Brussel, 1050 Brussels, Belgium
2 shared publications
Latest Publications
- Open Access
- 12 August 2026
- Published by Elsevier in SSRN Electronic Journal
Signal Modulation Effects on Mechanical Vibrations, Acoustic Streaming, and Acoustophoresis in Bulk Acoustic Wave Devices
This paper aims to identify the most suitable conditions to selectively maximise acoustic streaming and acoustophoresis. To achieve this, acoustic waves have been modulated via modulation of the PZT input. First, a mechanical characterisation has been performed for both the PZT and the acoustofluidic channel in order to evaluate the influence of the modulation on the mechanical dynamics of the device. Mechanical vibrations were then compared with acoustofluidic phenomena in order to link mechanics to the forces present in the system. It was found that sinusoidal pulsations followed the trend of mechanical vibrations for both acoustophoresis and acoustic streaming. For the unipolar pulse mode, only acoustophoresis seemed to follow the mechanical behaviour of the device, while streaming increased further in intensity with the duty cycle. For square waves, the acoustic force trend appears to be similar to the case of sinusoidal pulses, but it does not follow the mechanical behaviour entirely. Finally, the ratio between acoustic streaming and acoustophoresis was studied in order to find the best conditions to selectively enhance streaming or radiation. It was found that acoustophoresis is not enhanced by modulation by introducing a pulsation. For the case of acoustic streaming, although a 50 % duty cycle for sinusoidal pulses enhanced the streaming velocity by a factor of 2 compared to conventional actuation, the magnitude of the velocity dropped by about 80%. An optimum was found in the unipolar continuous actuation, which yielded an enhancement of about 1.5 times compared to the nominal conditions.
- 12 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSignal Modulation Effects on Mechanical Vibrations, Acoustic Streaming, and Acoustophoresis in Bulk Acoustic Wave Devices
This paper aims to identify the most suitable conditions to selectively maximise acoustic streaming and acoustophoresis. To achieve this, acoustic waves have been modulated via modulation of the PZT input. First, a mechanical characterisation has been performed for both the PZT and the acoustofluidic channel in order to evaluate the influence of the modulation on the mechanical dynamics of the device. Mechanical vibrations were then compared with acoustofluidic phenomena in order to link mechanics to the forces present in the system. It was found that sinusoidal pulsations followed the trend of mechanical vibrations for both acoustophoresis and acoustic streaming. For the unipolar pulse mode, only acoustophoresis seemed to follow the mechanical behaviour of the device, while streaming increased further in intensity with the duty cycle. For square waves, the acoustic force trend appears to be similar to the case of sinusoidal pulses, but it does not follow the mechanical behaviour entirely. Finally, the ratio between acoustic streaming and acoustophoresis was studied in order to find the best conditions to selectively enhance streaming or radiation. It was found that acoustophoresis is not enhanced by modulation by introducing a pulsation. For the case of acoustic streaming, although a 50 % duty cycle for sinusoidal pulses enhanced the streaming velocity by a factor of 2 compared to conventional actuation, the magnitude of the velocity dropped by about 80%. An optimum was found in the unipolar continuous actuation, which yielded an enhancement of about 1.5 times compared to the nominal conditions.
- 4 June 2026
- Published by Elsevier in Ultrasonics
- Vol. 167, 108182
Analysis of mechanical dynamics in acoustofluidics: assessing the impact of frequency sweeping on PZT performance and acoustic phenomena
- 4 June 2026
- Published by Elsevier in Ultrasonics
- Vol. 167, 108182
Analysis of mechanical dynamics in acoustofluidics: assessing the impact of frequency sweeping on PZT performance and acoustic phenomena
- Open Access
- 30 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (7) , 868
Characterizing Acoustic Behavior of Silicon Microchannels Separated by a Porous Wall
Lateral flow membrane microdevices are widely used for chromatographic separation processes and diagnostics. The separation performance of microfluidic lateral membrane devices is determined by mass transfer limitations in the membrane, and in the liquid phase, mass transfer resistance is dependent on the channel dimensions and transport properties of the species separated by the membrane. We present a novel approach based on an active bulk acoustic wave (BAW) mixing method to enhance lateral transport in micromachined silicon devices. BAWs have been previously applied in channels for mixing and trapping cells and particles in single channels, but this is, to the best of our knowledge, the first instance of their application in membrane devices. Our findings demonstrate that optimal resonance is achieved with minimal influence of the pore configuration on the average lateral flow. This has practical implications for the design of microfluidic devices, as the channels connected through porous walls under the acoustic streaming act as 760 µm-wide channels rather than two 375 µm-wide channels in the context of matching the standing pressure wave criteria of the piezoelectric transducer. However, the roughness of the microchannel walls does seem to play a significant role in mixing. A roughened (black silicon) wall results in a threefold increase in average streaming flow in BAW mode, suggesting potential avenues for further optimization.
- 30 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (7) , 868
Open AccessCharacterizing Acoustic Behavior of Silicon Microchannels Separated by a Porous Wall
Lateral flow membrane microdevices are widely used for chromatographic separation processes and diagnostics. The separation performance of microfluidic lateral membrane devices is determined by mass transfer limitations in the membrane, and in the liquid phase, mass transfer resistance is dependent on the channel dimensions and transport properties of the species separated by the membrane. We present a novel approach based on an active bulk acoustic wave (BAW) mixing method to enhance lateral transport in micromachined silicon devices. BAWs have been previously applied in channels for mixing and trapping cells and particles in single channels, but this is, to the best of our knowledge, the first instance of their application in membrane devices. Our findings demonstrate that optimal resonance is achieved with minimal influence of the pore configuration on the average lateral flow. This has practical implications for the design of microfluidic devices, as the channels connected through porous walls under the acoustic streaming act as 760 µm-wide channels rather than two 375 µm-wide channels in the context of matching the standing pressure wave criteria of the piezoelectric transducer. However, the roughness of the microchannel walls does seem to play a significant role in mixing. A roughened (black silicon) wall results in a threefold increase in average streaming flow in BAW mode, suggesting potential avenues for further optimization.
- Open Access
Janus Particles in Acoustofluidic Setup: The Interplay between Self-Propulsion and Acoustic Trapping
Acoustic focusing of particle flow in microfluidics has been shown to be an efficient tool for particle separation for various chemical and biomedical applications. The mechanism behind the method is the selective effect of the acoustic radiation force on distinct particles. In this way, they can be selectively focused and separated. The technique can also be applied under stationary conditions, i.e., in the absence of fluid flows. In this study, the manipulation of self-propelled particles, such as Janus particles, in an acoustofluidic setup was investigated. In experiments with self-propelled Janus particles and passive beads, we explored the interplay between self-propulsion and the acoustic radiation force. Our results demonstrated unusual and potentially useful effects such as selective trapping, escape, and assisted escape in binary mixtures of active and passive particles. We also analyzed various aspects related to the behavior of Janus particles in acoustic traps in the presence and absence of flows.
Open AccessJanus Particles in Acoustofluidic Setup: The Interplay between Self-Propulsion and Acoustic Trapping
Acoustic focusing of particle flow in microfluidics has been shown to be an efficient tool for particle separation for various chemical and biomedical applications. The mechanism behind the method is the selective effect of the acoustic radiation force on distinct particles. In this way, they can be selectively focused and separated. The technique can also be applied under stationary conditions, i.e., in the absence of fluid flows. In this study, the manipulation of self-propelled particles, such as Janus particles, in an acoustofluidic setup was investigated. In experiments with self-propelled Janus particles and passive beads, we explored the interplay between self-propulsion and the acoustic radiation force. Our results demonstrated unusual and potentially useful effects such as selective trapping, escape, and assisted escape in binary mixtures of active and passive particles. We also analyzed various aspects related to the behavior of Janus particles in acoustic traps in the presence and absence of flows.
- Open Access
- 20 February 2024
- Published by MDPI AG in Preprints.org
Janus Particles in Acoustofluidic setup: The Interplay between Self‐Propulsion and Acoustic Trapping
Acoustic focusing of particle flow in microfluidics has been shown to be an efficient tool for particle separation for various chemical and biomedical applications. The mechanism behind the method is the selective effect of the acoustic radiation force on distinct particles. In this way, they can be selectively focused and separated. The technique can also be applied under stationary conditions, i.e., in the absence of fluid flows. In this study, the manipulation of self-propelled particles, such as Janus particles, in an acoustofluidic setup is investigated. In experiments with self-propelled Janus particles and passive beads, we explore the interplay between self-propulsion and the acoustic radiation force. Our results demonstrate unusual and potentially useful effects such as selective trapping, escape and assisted escape in binary mixtures of active and passive particles. We also analyze various aspects related to the behavior of Janus particles in acoustic traps in the presence and absence of flows.
- 20 February 2024
- Published by MDPI AG in Preprints.org
Open AccessJanus Particles in Acoustofluidic setup: The Interplay between Self‐Propulsion and Acoustic Trapping
Acoustic focusing of particle flow in microfluidics has been shown to be an efficient tool for particle separation for various chemical and biomedical applications. The mechanism behind the method is the selective effect of the acoustic radiation force on distinct particles. In this way, they can be selectively focused and separated. The technique can also be applied under stationary conditions, i.e., in the absence of fluid flows. In this study, the manipulation of self-propelled particles, such as Janus particles, in an acoustofluidic setup is investigated. In experiments with self-propelled Janus particles and passive beads, we explore the interplay between self-propulsion and the acoustic radiation force. Our results demonstrate unusual and potentially useful effects such as selective trapping, escape and assisted escape in binary mixtures of active and passive particles. We also analyze various aspects related to the behavior of Janus particles in acoustic traps in the presence and absence of flows.
- Open Access
- 27 January 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (2) , 191
Enhanced Performance of an Acoustofluidic Device by Integrating Temperature Control
Acoustofluidics is an emerging research field wherein either mixing or (bio)-particle separation is conducted. High-power acoustic streaming can produce more intense and rapid flow patterns, leading to faster and more efficient liquid mixing. However, without cooling, the temperature of the piezoelectric element that is used to supply acoustic power to the fluid could rise above 50% of the Curie point of the piezomaterial, thereby accelerating its aging degradation. In addition, the supply of excessive heat to a liquid may lead to irreproducible streaming effects and gas bubble formation. To control these phenomena, in this paper, we present a feedback temperature control system integrated into an acoustofluidic setup using bulk acoustic waves (BAWs) to elevate mass transfer and manipulation of particles. The system performance was tested by measuring mixing efficiency and determining the average velocity magnitude of acoustic streaming. The results show that the integrated temperature control system keeps the temperature at the set point even at high acoustic powers and improves the reproducibility of the acoustofluidic setup performance when the applied voltage is as high as 200 V.
- 27 January 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (2) , 191
Open AccessEnhanced Performance of an Acoustofluidic Device by Integrating Temperature Control
Acoustofluidics is an emerging research field wherein either mixing or (bio)-particle separation is conducted. High-power acoustic streaming can produce more intense and rapid flow patterns, leading to faster and more efficient liquid mixing. However, without cooling, the temperature of the piezoelectric element that is used to supply acoustic power to the fluid could rise above 50% of the Curie point of the piezomaterial, thereby accelerating its aging degradation. In addition, the supply of excessive heat to a liquid may lead to irreproducible streaming effects and gas bubble formation. To control these phenomena, in this paper, we present a feedback temperature control system integrated into an acoustofluidic setup using bulk acoustic waves (BAWs) to elevate mass transfer and manipulation of particles. The system performance was tested by measuring mixing efficiency and determining the average velocity magnitude of acoustic streaming. The results show that the integrated temperature control system keeps the temperature at the set point even at high acoustic powers and improves the reproducibility of the acoustofluidic setup performance when the applied voltage is as high as 200 V.
- Open Access
- 23 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 1 (1) , 258-267
Continuous Manufacturing of Microfluidic Fibers Embedded with Ordered Microparticles via Ionic Gelation
- 23 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 1 (1) , 258-267
Open AccessContinuous Manufacturing of Microfluidic Fibers Embedded with Ordered Microparticles via Ionic Gelation