Mohd Zamri Ramli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mohd Zamri Ramli has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Mariyana Aida Ab Kadir
Universiti Teknologi Malaysia
3 shared publications Muhammad Farhan Mohd Fisol
2 shared publicationsNoraliani Alias
2 shared publications- Radzuan Sa'ARi
Faculty of Civil Engineering, Universiti Teknologi Malaysia, Skudai, Malaysia
2 shared publications Saidatul Assyura Rosman
2 shared publications- Siti Aminah Osman
Universiti Kebangsaan Malaysia (UKM)
2 shared publications
Latest Publications
- Open Access
- 12 February 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (3) , 125
Comparison of modified precast concrete corbel and nib connections under cyclic loading: numerical assessment
- 12 February 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (3) , 125
Open AccessComparison of modified precast concrete corbel and nib connections under cyclic loading: numerical assessment
- 12 October 2025
- Published by Springer Nature
- p. 1-7
The Effects of Friction Coefficients on the Performance Behavior of Triple Friction Pendulum Base Bearings
- 12 October 2025
- Published by Springer Nature
- p. 1-7
The Effects of Friction Coefficients on the Performance Behavior of Triple Friction Pendulum Base Bearings
- 12 August 2025
- Published by Springer Nature
- p. 405-416
Performance of Rubberized Pozzolanic Concrete Filled Steel Tube Under Lateral Cyclic Loading
- 12 August 2025
- Published by Springer Nature
- p. 405-416
Performance of Rubberized Pozzolanic Concrete Filled Steel Tube Under Lateral Cyclic Loading
- 27 May 2025
- Published by Springer Nature in Natural Hazards
- Vol. 121 (12) , 13927-13959
A review of seismic detection using fiber optic distributed acoustic sensing: from telecommunication cables to earthquake sensors
- 27 May 2025
- Published by Springer Nature in Natural Hazards
- Vol. 121 (12) , 13927-13959
A review of seismic detection using fiber optic distributed acoustic sensing: from telecommunication cables to earthquake sensors
- Open Access
- 8 February 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (2) , 1-24
Review on parametric building information modelling and forward design approaches for sustainable bridge engineering
- 8 February 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (2) , 1-24
Open AccessReview on parametric building information modelling and forward design approaches for sustainable bridge engineering
- Open Access
- 30 January 2025
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 132 (1) , 171-184
Advancing Concrete Bricks: Enhancing Mechanical and Durability Properties with Crumb Rubber and Metakaolin
One practical substitute for aggregate in concrete that can be used in sustainable building methods is waste tyre rubber and metakaolin a significant advancement in sustainable building methods. This study addresses the main problem of limited knowledge on optimizing crumb rubber proportions in concrete bricks, aiming to fill the research gap regarding their impact on brick properties. Bricks were manufactured using various crumb rubber proportions (CR5%, CR10%, CR15%, and CR20%) in a 215×103×65mm mould, maintaining a consistent water-to-cement ratio of 0.6 for all mixes. Rubberized concrete bricks were evaluated at 28 days for efflorescence, water absorption, initial rate of water absorption, density, physical observation, and compressive strength, compared to control specimens. The results revealed no efflorescence in any bricks, with a 38% density reduction in the CR20% mix compared to the control. Water absorption increased linearly with higher crumb rubber content, while the initial rate of water absorption rose to 15% crumb rubber before decreasing with further increases. Compressive strength ranged from 12 to 22 MPa, 17% higher than the minimum required for conventional bricks, although the CR20% mix's strength of 4.3 MPa was 60% lower than the control mix, rendering it unsuitable for non-load-bearing elements. The optimal combination for structurally sound concrete bricks was achieved by replacing up to 15% sand with crumb rubber and adding 10% MK. This study demonstrates that incorporating these materials can enhance the sustainability and structural integrity of concrete bricks.
- 30 January 2025
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 132 (1) , 171-184
Open AccessAdvancing Concrete Bricks: Enhancing Mechanical and Durability Properties with Crumb Rubber and Metakaolin
One practical substitute for aggregate in concrete that can be used in sustainable building methods is waste tyre rubber and metakaolin a significant advancement in sustainable building methods. This study addresses the main problem of limited knowledge on optimizing crumb rubber proportions in concrete bricks, aiming to fill the research gap regarding their impact on brick properties. Bricks were manufactured using various crumb rubber proportions (CR5%, CR10%, CR15%, and CR20%) in a 215×103×65mm mould, maintaining a consistent water-to-cement ratio of 0.6 for all mixes. Rubberized concrete bricks were evaluated at 28 days for efflorescence, water absorption, initial rate of water absorption, density, physical observation, and compressive strength, compared to control specimens. The results revealed no efflorescence in any bricks, with a 38% density reduction in the CR20% mix compared to the control. Water absorption increased linearly with higher crumb rubber content, while the initial rate of water absorption rose to 15% crumb rubber before decreasing with further increases. Compressive strength ranged from 12 to 22 MPa, 17% higher than the minimum required for conventional bricks, although the CR20% mix's strength of 4.3 MPa was 60% lower than the control mix, rendering it unsuitable for non-load-bearing elements. The optimal combination for structurally sound concrete bricks was achieved by replacing up to 15% sand with crumb rubber and adding 10% MK. This study demonstrates that incorporating these materials can enhance the sustainability and structural integrity of concrete bricks.
- 30 September 2024
- Published by UiTM Press, Universiti Teknologi MARA in Journal of Sustainable Civil Engineering and Technology
- Vol. 3 (2)
Optimizing steel plate shear wall performance: influence of infill plate thickness and connection length to vertical boundary elements
The Steel Plate Shear Wall (SPSW) is widely used as a lateral force resisting system in areas prone to high seismic activity. This is because of its exceptional ductility and ability to dissipate energy. Previous studies have indicated that disconnecting the infill plate from the Vertical Boundary Element (VBE) can decrease the demands on the column. The observed outcomes lead to a decline in both the energy dissipation capability and the lateral load-bearing capacity. The primary goal of this investigation is to mitigate stress on the column while concurrently reducing both the energy dissipation and lateral force capacities. To accomplish this, a partial connection will be established between the infill plate and the Vertical Boundary Element. Thus, the overarching objective of this research is to identify the optimal connection length that minimizes the demands on the column while simultaneously curtailing the reduction in energy dissipation and lateral force capacities. Using Abaqus software, twenty models with different infill plate thicknesses and lengths of connection between the infill plate and Vertical Boundary Element were analysed. To determine the optimal length of connection between the infill plate and Vertical Boundary Element, the energy dissipation capacity, lateral load capacity, and column stresses were evaluated and compared. The maximum dissipation of energy occurs at a connection length of 75% between the infill plate and Vertical Boundary Element and an infill plate thickness of 12 mm. In contrast, the greatest lateral load capacity is achieved at connection lengths of 50% between a 25 mm infill plate thickness and a Vertical Boundary Element weight of 25%. The column stress reaches its minimum value when the infill plate measures 20 and 25 mm, and it reaches its maximum value when the infill plate measures 6 mm and 12 mm. By increasing the thickness of the infill plate and minimizing its connection to the Vertical Boundary Elements, the column stress in Vertical Boundary Elements can be decreased, while simultaneously enhancing lateral load capacity and maintaining an adequate level of energy dissipation.
- 30 September 2024
- Published by UiTM Press, Universiti Teknologi MARA in Journal of Sustainable Civil Engineering and Technology
- Vol. 3 (2)
Optimizing steel plate shear wall performance: influence of infill plate thickness and connection length to vertical boundary elements
The Steel Plate Shear Wall (SPSW) is widely used as a lateral force resisting system in areas prone to high seismic activity. This is because of its exceptional ductility and ability to dissipate energy. Previous studies have indicated that disconnecting the infill plate from the Vertical Boundary Element (VBE) can decrease the demands on the column. The observed outcomes lead to a decline in both the energy dissipation capability and the lateral load-bearing capacity. The primary goal of this investigation is to mitigate stress on the column while concurrently reducing both the energy dissipation and lateral force capacities. To accomplish this, a partial connection will be established between the infill plate and the Vertical Boundary Element. Thus, the overarching objective of this research is to identify the optimal connection length that minimizes the demands on the column while simultaneously curtailing the reduction in energy dissipation and lateral force capacities. Using Abaqus software, twenty models with different infill plate thicknesses and lengths of connection between the infill plate and Vertical Boundary Element were analysed. To determine the optimal length of connection between the infill plate and Vertical Boundary Element, the energy dissipation capacity, lateral load capacity, and column stresses were evaluated and compared. The maximum dissipation of energy occurs at a connection length of 75% between the infill plate and Vertical Boundary Element and an infill plate thickness of 12 mm. In contrast, the greatest lateral load capacity is achieved at connection lengths of 50% between a 25 mm infill plate thickness and a Vertical Boundary Element weight of 25%. The column stress reaches its minimum value when the infill plate measures 20 and 25 mm, and it reaches its maximum value when the infill plate measures 6 mm and 12 mm. By increasing the thickness of the infill plate and minimizing its connection to the Vertical Boundary Elements, the column stress in Vertical Boundary Elements can be decreased, while simultaneously enhancing lateral load capacity and maintaining an adequate level of energy dissipation.
- 12 January 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 11 (4) , 2186-2220
Comprehensive Reliability Analysis of Seismic Stability for Concrete Gravity Dams: A Case Study of Pine Flat Dam
- 12 January 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 11 (4) , 2186-2220
Comprehensive Reliability Analysis of Seismic Stability for Concrete Gravity Dams: A Case Study of Pine Flat Dam
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2827 (1)
Influence of steel plate thickness on the reinforced concrete frame under cyclic loading
Reinforced concrete (RC) frame is most commonly used in high-rise buildings despite having proven to have a low lateral force resistance. Steel plate reinforced concrete shear wall (SPRCW) has an excellent performance in resisting seismic load. SPRCW has an excellent performance in resisting seismic load as it has been proven to have better stiffness, ductility, structural response, reduction in dead load and wall thickness. SPCRW also has an advantage in reduction of cost and time of construction as compared to RC frame. The lateral deformation, ultimate lateral load and ductility are affected by the thickness of the steel plate itself. However, the cost of steel nowadays has increased gradually. Though, it can be reduced vastly by optimizing the thickness of steel plate. In this study, the effects of steel plate thickness are investigated in order to identify the optimum steel plate thickness. Therefore, the objective of this study is to determine lateral deformation, ultimate lateral load and ductility of the SPRCW when the thicknesses of steel plates are varied. Ten SPRCW models were analyzed by ABAQUS software, where the models were subjected to lateral cyclic loading as accordance to FEMA 461. Lateral deformation increased when the steel plate thickness was increased and achieved its maximum value when the thickness was at 1.4 mm. The ultimate lateral load also increased as the thickness of steel plate increased. Although the ductility shows increment, the ductility remains constant when steel plate was at 0.8 mm.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2827 (1)
Open AccessInfluence of steel plate thickness on the reinforced concrete frame under cyclic loading
Reinforced concrete (RC) frame is most commonly used in high-rise buildings despite having proven to have a low lateral force resistance. Steel plate reinforced concrete shear wall (SPRCW) has an excellent performance in resisting seismic load. SPRCW has an excellent performance in resisting seismic load as it has been proven to have better stiffness, ductility, structural response, reduction in dead load and wall thickness. SPCRW also has an advantage in reduction of cost and time of construction as compared to RC frame. The lateral deformation, ultimate lateral load and ductility are affected by the thickness of the steel plate itself. However, the cost of steel nowadays has increased gradually. Though, it can be reduced vastly by optimizing the thickness of steel plate. In this study, the effects of steel plate thickness are investigated in order to identify the optimum steel plate thickness. Therefore, the objective of this study is to determine lateral deformation, ultimate lateral load and ductility of the SPRCW when the thicknesses of steel plates are varied. Ten SPRCW models were analyzed by ABAQUS software, where the models were subjected to lateral cyclic loading as accordance to FEMA 461. Lateral deformation increased when the steel plate thickness was increased and achieved its maximum value when the thickness was at 1.4 mm. The ultimate lateral load also increased as the thickness of steel plate increased. Although the ductility shows increment, the ductility remains constant when steel plate was at 0.8 mm.
- Open Access
- 30 March 2022
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 68 (1) , 519-538
Performance of rubberized concrete-filled hollow steel column under monotonic and cyclic loadings
Concrete-filled hollow steel (CFHS) has become more popular due to its advantages and benefits compared to reinforced concrete. This paper presents the experimental investigation on the performance of rubberized pozzolanic concrete-filled hollowsteel column (RuPCFHS) under monotonic and cyclic lateral load in comparison to bare hollow steel column and normal concrete-filled hollow steel column (NCFHS). The test parameters included the type of concrete infill and the level of axial load. Modified rubberized pozzolanic concrete with comparable compressive strength to that of normal concrete was used. Two types of axial load conditions: no axial load and 20% axial load were considered in the testing. The test results indicate that the performance of the columns improved when concrete infill was introduced in the hollow steel. The application of axial loading also increased the capacity of the column specimens. RuPCFHS behaved with comparable performance with NCFHS in both monotonic and cyclic testing. RuPCFHS recorded the highest increment in the energy dissipation capability when 20% axial load was applied to the column when compared to the other specimens. The comparable performance indicated the possibility ofRuPC as an infill material of CFHS andRuPCFHS as a structural component.
- 30 March 2022
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 68 (1) , 519-538
Open AccessPerformance of rubberized concrete-filled hollow steel column under monotonic and cyclic loadings
Concrete-filled hollow steel (CFHS) has become more popular due to its advantages and benefits compared to reinforced concrete. This paper presents the experimental investigation on the performance of rubberized pozzolanic concrete-filled hollowsteel column (RuPCFHS) under monotonic and cyclic lateral load in comparison to bare hollow steel column and normal concrete-filled hollow steel column (NCFHS). The test parameters included the type of concrete infill and the level of axial load. Modified rubberized pozzolanic concrete with comparable compressive strength to that of normal concrete was used. Two types of axial load conditions: no axial load and 20% axial load were considered in the testing. The test results indicate that the performance of the columns improved when concrete infill was introduced in the hollow steel. The application of axial loading also increased the capacity of the column specimens. RuPCFHS behaved with comparable performance with NCFHS in both monotonic and cyclic testing. RuPCFHS recorded the highest increment in the energy dissipation capability when 20% axial load was applied to the column when compared to the other specimens. The comparable performance indicated the possibility ofRuPC as an infill material of CFHS andRuPCFHS as a structural component.