Hongmin Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hongmin Tang has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Yiming Zhang
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
6 shared publications - Yizhan Zhuang
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
5 shared publications - Chao Liu
Fujian Key Laboratory of New Energy Generation and Power Conversion, School of Electrical Engineering and Automation, Fuzhou University, Fuzhou, China
3 shared publications - Ronghuan Xie
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
2 shared publications - Wenxuan Pan
School of Electrical Engineering and Automation, Fuzhou University, Fuzhou, China
2 shared publications - Xiaoying Chen
College of Electrical Engineering and Automation Fuzhou University Fuzhou China
2 shared publications
Latest Publications
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (3) , 4630-4639
A Self-Adaptive Dual-Channel LCC-S Detuned Topology for Misalignment Tolerance in AUV Wireless Power Transfer Systems
The traditional method for achieving misalignment tolerance using two detuned circuits depends on output sampling and communication between the primary and secondary sides. This paper proposes a self-adaptive dual-channel detuned compensation topology to achieve a stable output for wireless charging of autonomous underwater vehicles (AUVs). In the low coupling coefficient interval, power is transferred through both channels; in the high coupling coefficient interval, power is transferred through only one channel. The mode switching process occurs naturally without additional switches or control. Two sets of arc-shaped coils are employed as the two channels, forming dual arc-shaped coil sets, without cross-coupling between them. Due to the symmetrical magnetic couplers, the mutual inductances of the two channels respond similarly to both rotational and axial misalignment. A 1.6-kW experimental prototype for the AUV wireless charging is built to validate the feasibility of the proposal. The output voltage fluctuation of the system is 8% within the coupling coefficient interval of [0.2, 0.6]. The system can still maintain over 89% transmission efficiency in the worst case.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (3) , 4630-4639
A Self-Adaptive Dual-Channel LCC-S Detuned Topology for Misalignment Tolerance in AUV Wireless Power Transfer Systems
The traditional method for achieving misalignment tolerance using two detuned circuits depends on output sampling and communication between the primary and secondary sides. This paper proposes a self-adaptive dual-channel detuned compensation topology to achieve a stable output for wireless charging of autonomous underwater vehicles (AUVs). In the low coupling coefficient interval, power is transferred through both channels; in the high coupling coefficient interval, power is transferred through only one channel. The mode switching process occurs naturally without additional switches or control. Two sets of arc-shaped coils are employed as the two channels, forming dual arc-shaped coil sets, without cross-coupling between them. Due to the symmetrical magnetic couplers, the mutual inductances of the two channels respond similarly to both rotational and axial misalignment. A 1.6-kW experimental prototype for the AUV wireless charging is built to validate the feasibility of the proposal. The output voltage fluctuation of the system is 8% within the coupling coefficient interval of [0.2, 0.6]. The system can still maintain over 89% transmission efficiency in the worst case.
- 13 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (12) , 16904-16915
A Misalignment-Insensitive Hybrid Reconfigurable Wireless Charging System for Constant-Voltage and Constant-Current Outputs Based on a Novel Bipolar Coil Symmetrical to Two Perpendicular Directions
The charging process of lithium-ion batteries in the wireless charging system of electric vehicles needs to go through constant-current (CC) and constant-voltage (CV) charging stages. In this article, a new reconfigurable hybrid wireless charging system is proposed to realize CC and CV outputs over a wide misalignment range. The proposed system can be reconfigured to form an input-parallel-output series connection of the inductor-capacitor-capacitor series ( LCC- S) and S -LCC topologies to achieve a CV output, or an input-series-output-series connection of the S-S and LCC - LCC topologies to realize a CC output. Two sets of magnetic couplers are utilized, with one as the traditional unipolar coil set and the other as a novel bipolar coil set. Both coil sets can realize symmetrical misalignment performance along two perpendicular directions. Thus, the proposed hybrid system can achieve switchable CC and CV outputs and misalignment tolerance along two perpendicular directions. The mathematical model is established. The implemented prototype validates that the output voltage, output current, output power, and system efficiency are relatively stable in the vertical direction and a certain oblique range. CC and CV outputs can be achieved with the highest efficiency up to 94.52%.
- 13 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (12) , 16904-16915
A Misalignment-Insensitive Hybrid Reconfigurable Wireless Charging System for Constant-Voltage and Constant-Current Outputs Based on a Novel Bipolar Coil Symmetrical to Two Perpendicular Directions
The charging process of lithium-ion batteries in the wireless charging system of electric vehicles needs to go through constant-current (CC) and constant-voltage (CV) charging stages. In this article, a new reconfigurable hybrid wireless charging system is proposed to realize CC and CV outputs over a wide misalignment range. The proposed system can be reconfigured to form an input-parallel-output series connection of the inductor-capacitor-capacitor series ( LCC- S) and S -LCC topologies to achieve a CV output, or an input-series-output-series connection of the S-S and LCC - LCC topologies to realize a CC output. Two sets of magnetic couplers are utilized, with one as the traditional unipolar coil set and the other as a novel bipolar coil set. Both coil sets can realize symmetrical misalignment performance along two perpendicular directions. Thus, the proposed hybrid system can achieve switchable CC and CV outputs and misalignment tolerance along two perpendicular directions. The mathematical model is established. The implemented prototype validates that the output voltage, output current, output power, and system efficiency are relatively stable in the vertical direction and a certain oblique range. CC and CV outputs can be achieved with the highest efficiency up to 94.52%.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (9) , 11814-11823
A Dual-Frequency Modular Wireless Power Transfer System for Auxiliary Power Supply of Power Electronics Converters
In some industrial application scenarios, multiple constant-voltage (CV) outputs with galvanic isolation are required. Selective power transfer among the CV outputs can enable its flexibility. This paper proposes a modular singlechannel wireless power transfer system for industrial power supply with a dual-frequency hybrid compensation topology. The series-series topology is adopted for CV outputs at the two CV output frequency points. The band-stop filter with a parallel resonant network is designed to filter the undesired frequency component and the series series-parallel resonant network is formed to avoid the impact of the band-stop filter on the desired frequency component. In this way, selective power transfer with CV outputs can be achieved by changing the working frequency. The mathematical model of the proposed compensation topology is established and analyzed. The transmission coils and the compensating inductors are integrated to achieve a compact structure. The design principles of the coupler parameters are proposed and a design example is given. An experimental prototype is built to verify the theoretical analysis. The system realizes CV outputs and supplies power to different loads at different working frequencies, with an average transfer efficiency of 85.23% and a maximum output power of 85.95 W
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (9) , 11814-11823
A Dual-Frequency Modular Wireless Power Transfer System for Auxiliary Power Supply of Power Electronics Converters
In some industrial application scenarios, multiple constant-voltage (CV) outputs with galvanic isolation are required. Selective power transfer among the CV outputs can enable its flexibility. This paper proposes a modular singlechannel wireless power transfer system for industrial power supply with a dual-frequency hybrid compensation topology. The series-series topology is adopted for CV outputs at the two CV output frequency points. The band-stop filter with a parallel resonant network is designed to filter the undesired frequency component and the series series-parallel resonant network is formed to avoid the impact of the band-stop filter on the desired frequency component. In this way, selective power transfer with CV outputs can be achieved by changing the working frequency. The mathematical model of the proposed compensation topology is established and analyzed. The transmission coils and the compensating inductors are integrated to achieve a compact structure. The design principles of the coupler parameters are proposed and a design example is given. An experimental prototype is built to verify the theoretical analysis. The system realizes CV outputs and supplies power to different loads at different working frequencies, with an average transfer efficiency of 85.23% and a maximum output power of 85.95 W
- 11 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (4) , 3985-3989
A Strongly Coupled Vehicle-to-Vehicle Wireless Charging System for Emergency Charging Purposes With Constant-Current and Constant-Voltage Charging Capabilities
One current issue concerning rapidly developing electric vehicles (EVs) is range anxiety, especially when no charging station is around. A simple and expandable vehicle-to-vehicle (V2V) wireless charging scheme has been proposed to satisfy urgent charging needs. In the proposed V2V system, one EV serves as a mobile charger for the other. Two power relay coils without compensating capacitors are adopted, forming a strong coupling with the coils in the EV. Thus, power can be transferred from one EV to the other via the ac magnetic relay. The mathematical models of the existing loosely coupled V2V system and the proposed strongly coupled V2V system are established. The constant-voltage and constant-current operations for the proposed V2V system are explored. The experimental results reveal that, compared with the existing loosely coupled V2V system, employing the proposed strongly coupled V2V system can improve efficiency and reduce weight, volume, and cost.
- 11 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (4) , 3985-3989
A Strongly Coupled Vehicle-to-Vehicle Wireless Charging System for Emergency Charging Purposes With Constant-Current and Constant-Voltage Charging Capabilities
One current issue concerning rapidly developing electric vehicles (EVs) is range anxiety, especially when no charging station is around. A simple and expandable vehicle-to-vehicle (V2V) wireless charging scheme has been proposed to satisfy urgent charging needs. In the proposed V2V system, one EV serves as a mobile charger for the other. Two power relay coils without compensating capacitors are adopted, forming a strong coupling with the coils in the EV. Thus, power can be transferred from one EV to the other via the ac magnetic relay. The mathematical models of the existing loosely coupled V2V system and the proposed strongly coupled V2V system are established. The constant-voltage and constant-current operations for the proposed V2V system are explored. The experimental results reveal that, compared with the existing loosely coupled V2V system, employing the proposed strongly coupled V2V system can improve efficiency and reduce weight, volume, and cost.
- 28 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (4) , 4850-4857
An LC Squared-Compensated Inductive Power Transfer System With Misalignment Tolerance and Constant-Current Output
Inductive power transfer enjoys the advantages of convenience and adaptability to various application scenarios. However, the coil misalignment normally cannot be avoided in practical applications, which can cause a dramatic decline of the mutual inductance and a sharp fluctuation of the output. To solve this issue, this article proposes an inductor–capacitor ( LC ) squared-compensated topology based on three integrated and decoupled transmitting coils. The simple series compensation is adopted on the secondary side, forming an LC squared series topology with a constant-current (CC) output. The receiving coil has couplings with the first and third transmitting coils. Thus, the output is related to the two mutual inductances, which can be optimized for a smooth output against misalignment with a proper design of the magnetic couplers. The mathematical model is established and analyzed. The experimental results obtained from the prototype reveal that the output fluctuates less than 6% from the central to the boundary positions. Also, a CC output independent of the load is realized. Compared with previous methods, the proposed method is a low-cost solution to achieve misalignment tolerance.
- 28 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (4) , 4850-4857
An LC Squared-Compensated Inductive Power Transfer System With Misalignment Tolerance and Constant-Current Output
Inductive power transfer enjoys the advantages of convenience and adaptability to various application scenarios. However, the coil misalignment normally cannot be avoided in practical applications, which can cause a dramatic decline of the mutual inductance and a sharp fluctuation of the output. To solve this issue, this article proposes an inductor–capacitor ( LC ) squared-compensated topology based on three integrated and decoupled transmitting coils. The simple series compensation is adopted on the secondary side, forming an LC squared series topology with a constant-current (CC) output. The receiving coil has couplings with the first and third transmitting coils. Thus, the output is related to the two mutual inductances, which can be optimized for a smooth output against misalignment with a proper design of the magnetic couplers. The mathematical model is established and analyzed. The experimental results obtained from the prototype reveal that the output fluctuates less than 6% from the central to the boundary positions. Also, a CC output independent of the load is realized. Compared with previous methods, the proposed method is a low-cost solution to achieve misalignment tolerance.
- 19 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (3) , 3864-3872
An Interoperable Electric Vehicle Wireless Charging System Based on Mutually Spliced Double-D Coil
Interoperability and misalignment tolerance issues are two urgent problems to be solved in electric vehicles wireless charging systems. To address these issues, a wireless power transfer (WPT) system based on decoupled mutually spliced double-D (DD) receiving coils is proposed in this article, which can achieve certain interoperability and antimisalignment performance. These two receiving coils are connected in series via the rectifiers on the dc side, resulting in the total equivalent mutual inductance equal to the sum of the absolute values of the mutual inductances between the transmitting coil and the two receiving coils. Compared with existing works, the proposed WPT system can achieve interoperability and misalignment tolerance with different transmitting coils: the square coil, the DD coil along the X- or Y -directions, and the quadrupole coil. A mathematical model and an experimental prototype are developed to verify the effectiveness of the proposed scheme, and the highest efficiency of the experimental prototype is 92.49%.
- 19 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (3) , 3864-3872
An Interoperable Electric Vehicle Wireless Charging System Based on Mutually Spliced Double-D Coil
Interoperability and misalignment tolerance issues are two urgent problems to be solved in electric vehicles wireless charging systems. To address these issues, a wireless power transfer (WPT) system based on decoupled mutually spliced double-D (DD) receiving coils is proposed in this article, which can achieve certain interoperability and antimisalignment performance. These two receiving coils are connected in series via the rectifiers on the dc side, resulting in the total equivalent mutual inductance equal to the sum of the absolute values of the mutual inductances between the transmitting coil and the two receiving coils. Compared with existing works, the proposed WPT system can achieve interoperability and misalignment tolerance with different transmitting coils: the square coil, the DD coil along the X- or Y -directions, and the quadrupole coil. A mathematical model and an experimental prototype are developed to verify the effectiveness of the proposed scheme, and the highest efficiency of the experimental prototype is 92.49%.
- Open Access
- 30 December 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2973-2975
Performance of the SLC polarized electron source with high polarization
For the 1992 operating cycle of the SLAC Linear Collider (SLC), the polarized electron source (PES) during its maiden run successfully met the pulse intensity and overall efficiency requirements of the SLC. However, the polarization of the bulk GaAs cathode was low (/spl sim/27%) and the pulse-to-pulse stability was marginal. We have shown that adequate charge for the SLC can be extracted from a strained layer cathode having P/sub espl sim/80% even though the quantum efficiency (QE) is
- 30 December 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2973-2975
Open AccessPerformance of the SLC polarized electron source with high polarization
For the 1992 operating cycle of the SLAC Linear Collider (SLC), the polarized electron source (PES) during its maiden run successfully met the pulse intensity and overall efficiency requirements of the SLC. However, the polarization of the bulk GaAs cathode was low (/spl sim/27%) and the pulse-to-pulse stability was marginal. We have shown that adequate charge for the SLC can be extracted from a strained layer cathode having P/sub espl sim/80% even though the quantum efficiency (QE) is