Yuheng Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yuheng Cao has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Chenyang Xia
School of Electrical Engineering China University of Mining and Technology Xuzhou China
4 shared publications - Shuze Zhao
School of Electrical Engineering, China University of Mining and Technology, Xuzhou, China
4 shared publications - Ziyue Yang
China University of Mining and Technology
4 shared publications - Anran Sun
School of Electrical Engineering, China University of Mining and Technology, Xuzhou, China
1 shared publication Chenhao Lu
School of Electrical Engineering, China University of Mining and Technology, Xuzhou, China
1 shared publication- Chenhao Lu
School of Electrical Engineering, China University of Mining and Technology, Xuzhou, China
1 shared publication
Latest Publications
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 2604-2618
Dual-Frequency Metal Object Detection Based on SPWM Control for Wireless EV Charging System
Metal object detection (MOD) is an essential auxiliary function for wireless electric vehicle charging (WEVC) systems. However, current systems suffer from poor independence, low detection sensitivity, and failures at single detection frequencies. To this end, this article proposes a dual-frequency metal object detection (DF-MOD) technology based on sinusoidal pulsewidth modulation (SPWM) control for WEVC systems. The article first introduces the system structure and working principle, then establishes an equivalent model of the DF-MOD and analyzes its operational characteristics. Subsequently, the parameters for the main circuit and the filter circuit are designed to further enhance the detection sensitivity and anti-interference capability of the DF-MOD system. Finally, a system experimental platform is constructed to verify the feasibility and superiority of the DF-MOD technology controlled by SPWM in WEVC systems. The results indicate that the system achieves independent operation from the WEVC systems and improves detection sensitivity for 40×40 mm copper plates, aluminum plates, iron plates, and ferrite plates by 7.56%, 5.59%, 5.36%, and 16.82%, respectively, compared to single-frequency detection. Additionally, it achieves blind spot-free detection across the entire area.
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 2604-2618
Dual-Frequency Metal Object Detection Based on SPWM Control for Wireless EV Charging System
Metal object detection (MOD) is an essential auxiliary function for wireless electric vehicle charging (WEVC) systems. However, current systems suffer from poor independence, low detection sensitivity, and failures at single detection frequencies. To this end, this article proposes a dual-frequency metal object detection (DF-MOD) technology based on sinusoidal pulsewidth modulation (SPWM) control for WEVC systems. The article first introduces the system structure and working principle, then establishes an equivalent model of the DF-MOD and analyzes its operational characteristics. Subsequently, the parameters for the main circuit and the filter circuit are designed to further enhance the detection sensitivity and anti-interference capability of the DF-MOD system. Finally, a system experimental platform is constructed to verify the feasibility and superiority of the DF-MOD technology controlled by SPWM in WEVC systems. The results indicate that the system achieves independent operation from the WEVC systems and improves detection sensitivity for 40×40 mm copper plates, aluminum plates, iron plates, and ferrite plates by 7.56%, 5.59%, 5.36%, and 16.82%, respectively, compared to single-frequency detection. Additionally, it achieves blind spot-free detection across the entire area.
- 30 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (4) , 4029-4044
Bivariate Detection-Based Dual-Mode Metal Object Detection System for Wireless EV Charging
Metal object detection (MOD) technology is crucial to drive the commercialization of wireless electric vehicle (EV) charging. Previous detection coil-based MOD methods mainly detect metallic foreign objects by the variation of sampling voltage, which may mistake nonmetallic foreign objects for threats. To solve this problem, this paper proposes a bivariate detection based dual-mode MOD system integrating time-division multiplexing (TDM) mode for sensitively detecting foreign objects and frequency-swept resonance (FSR) mode for accurately identifying metallic foreign objects. Firstly, by modeling foreign objects and resonant circuits, it is observed that metallic objects increase the resonant frequency and decrease the sampling voltage at resonant frequencies. Subsequently, the specifications of the detection coil and the intrinsic resonant frequency of the resonant circuit are optimized to enhance the sensitivity of the MOD system. Finally, an experimental platform with an output power of 3.3 kW is built to verify the effectiveness of the MOD system. The experimental results show that the TMD and FSR modes of the MOD system can accurately detect and recognize metallic objects. Furthermore, the TDM mode of the MOD system can achieve 100% probability of detecting all types of coins and 78% probability of detecting 29 mm paper clips through 100 random drop tests.
- 30 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (4) , 4029-4044
Bivariate Detection-Based Dual-Mode Metal Object Detection System for Wireless EV Charging
Metal object detection (MOD) technology is crucial to drive the commercialization of wireless electric vehicle (EV) charging. Previous detection coil-based MOD methods mainly detect metallic foreign objects by the variation of sampling voltage, which may mistake nonmetallic foreign objects for threats. To solve this problem, this paper proposes a bivariate detection based dual-mode MOD system integrating time-division multiplexing (TDM) mode for sensitively detecting foreign objects and frequency-swept resonance (FSR) mode for accurately identifying metallic foreign objects. Firstly, by modeling foreign objects and resonant circuits, it is observed that metallic objects increase the resonant frequency and decrease the sampling voltage at resonant frequencies. Subsequently, the specifications of the detection coil and the intrinsic resonant frequency of the resonant circuit are optimized to enhance the sensitivity of the MOD system. Finally, an experimental platform with an output power of 3.3 kW is built to verify the effectiveness of the MOD system. The experimental results show that the TMD and FSR modes of the MOD system can accurately detect and recognize metallic objects. Furthermore, the TDM mode of the MOD system can achieve 100% probability of detecting all types of coins and 78% probability of detecting 29 mm paper clips through 100 random drop tests.
- 25 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (10) , 13988-14004
Planar Double-Winding Foreign Object Detection for the EV Wireless Charging System Based on Time-Division Multiplexing
Metal object detection (MOD) and living object detection (LOD) are essential for ensuring the safe operation of the electric vehicle (EV) wireless charging system. Since most MOD or LOD single-type systems protect the EV wireless charging system incomprehensively, the existing MOD and LOD shared system has problems such as difficulty in acquiring detection signal, and low accuracy for small-sized living objects (LOs). Thus, this article proposes a planar double-winding foreign object detection (FOD) system based on the time-division multiplexing control strategy. First, the planar double-winding FOD system structure is given, and the time-division multiplexing FOD mode switching as well as FOD judgement principle are analyzed. Second, the phase variation of bandpass filter output voltage in the planar double-winding FOD system is analyzed. Third, the sensing coil structure and detecting circuit parameters are optimized. Finally, an experimental platform is built to verify the feasibility. The results show that when MOD and LOD phase thresholds are set to 3 $^{\circ }$ and 20 $^{\circ }$ , respectively, the phase variation is −21.3 $^{\circ }$ , −27.9 $^{\circ }$ , −7 $^{\circ }$ , and 48.3 $^{\circ }$ for a copper plate, aluminum plate, iron plate of 40 × 40 mm 2 and one hand. Therefore, the phase variation is larger than the phase threshold, which can effectively detect MO and LO.
- 25 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (10) , 13988-14004
Planar Double-Winding Foreign Object Detection for the EV Wireless Charging System Based on Time-Division Multiplexing
Metal object detection (MOD) and living object detection (LOD) are essential for ensuring the safe operation of the electric vehicle (EV) wireless charging system. Since most MOD or LOD single-type systems protect the EV wireless charging system incomprehensively, the existing MOD and LOD shared system has problems such as difficulty in acquiring detection signal, and low accuracy for small-sized living objects (LOs). Thus, this article proposes a planar double-winding foreign object detection (FOD) system based on the time-division multiplexing control strategy. First, the planar double-winding FOD system structure is given, and the time-division multiplexing FOD mode switching as well as FOD judgement principle are analyzed. Second, the phase variation of bandpass filter output voltage in the planar double-winding FOD system is analyzed. Third, the sensing coil structure and detecting circuit parameters are optimized. Finally, an experimental platform is built to verify the feasibility. The results show that when MOD and LOD phase thresholds are set to 3 $^{\circ }$ and 20 $^{\circ }$ , respectively, the phase variation is −21.3 $^{\circ }$ , −27.9 $^{\circ }$ , −7 $^{\circ }$ , and 48.3 $^{\circ }$ for a copper plate, aluminum plate, iron plate of 40 × 40 mm 2 and one hand. Therefore, the phase variation is larger than the phase threshold, which can effectively detect MO and LO.
- 29 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (3) , 3809-3825
Evaluation Modeling and Improvement Method for Sensitivity of Metal Object Detection in EV Wireless Charging System
Metal object detection (MOD) technology can effectively improve the safety of wireless charging systems for electric vehicles. To solve the problem of disunity in sensitivity evaluation methods and the lack of parameters design rules in the research field of MOD technology, a sensitivity evaluation model for MOD systems based on sensing coils is constructed and three system parameters design rules are proposed based on this model. First, a sensitivity evaluation factor is defined and different types of detection blind spot generation mechanisms are distinguished. Second, three parameters design rules are obtained: parameters design rules for high sensitivity, parameters design rules for low detection voltage errors, and parameters design rules for reducing Rx coil impact. Third, the parameters design rules are verified and modified by electromagnetic field simulation. Three engineering parameters design rules for the bipolar checkerboard MOD system are obtained. Finally, a bipolar checkerboard MOD system is built to test different materials and sizes of metal objects (MOs). The eddy current dividing MOs capability and the advantage of high sensitivity of the bipolar checkerboard MOD system are verified.
- 29 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (3) , 3809-3825
Evaluation Modeling and Improvement Method for Sensitivity of Metal Object Detection in EV Wireless Charging System
Metal object detection (MOD) technology can effectively improve the safety of wireless charging systems for electric vehicles. To solve the problem of disunity in sensitivity evaluation methods and the lack of parameters design rules in the research field of MOD technology, a sensitivity evaluation model for MOD systems based on sensing coils is constructed and three system parameters design rules are proposed based on this model. First, a sensitivity evaluation factor is defined and different types of detection blind spot generation mechanisms are distinguished. Second, three parameters design rules are obtained: parameters design rules for high sensitivity, parameters design rules for low detection voltage errors, and parameters design rules for reducing Rx coil impact. Third, the parameters design rules are verified and modified by electromagnetic field simulation. Three engineering parameters design rules for the bipolar checkerboard MOD system are obtained. Finally, a bipolar checkerboard MOD system is built to test different materials and sizes of metal objects (MOs). The eddy current dividing MOs capability and the advantage of high sensitivity of the bipolar checkerboard MOD system are verified.