Yassine Rakcho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yassine Rakcho has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
Ali Raza Ayub
6 shared publicationsAmal Lahkimi
6 shared publicationsAbdelhay El Amri
5 shared publicationsMahdi Lechheb
5 shared publicationsAbdelkrim Abourriche
4 shared publicationsFatima Moussaoui
Laboratory of Engineering, Electrochemistry, Modelling and Environment, Faculty of Sciences Dhar El Mehraz, Sidi Mohamed Ben Abdellah University, Fez, Morocco
4 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by Elsevier in Next Materials
- Vol. 13
Fabrication and characterization of flat microfiltration ceramic membrane based on naturel Tamegroute clay: Application as a pretreatment for raw seawater reverse osmosis desalination
- 16 September 2026
- Published by Elsevier in Next Materials
- Vol. 13
Open AccessFabrication and characterization of flat microfiltration ceramic membrane based on naturel Tamegroute clay: Application as a pretreatment for raw seawater reverse osmosis desalination
- Open Access
- 12 August 2026
- Published by Elsevier in Next Materials
- Vol. 13
Green conversion of artemisia residues into activated carbon for efficient adsorptive removal of toxic dyes from wastewater: Experimental and DFT insights
- 12 August 2026
- Published by Elsevier in Next Materials
- Vol. 13
Open AccessGreen conversion of artemisia residues into activated carbon for efficient adsorptive removal of toxic dyes from wastewater: Experimental and DFT insights
- 16 July 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 217
Development of Chitosan@ZnO@Ghassoul clay biohybrid beads for photocatalytic dye degradation and Cu(II) photoreduction
- 16 July 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 217
Development of Chitosan@ZnO@Ghassoul clay biohybrid beads for photocatalytic dye degradation and Cu(II) photoreduction
- 3 December 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 337 (Pt 1) , 149438
Cactus cladodes as a renewable source of cellulose for the adsorption of Safranin O and Acid Blue 25 dyes: Optimization of extraction parameters, comprehensive experimental investigation, and mechanistic interpretation via Density Functional Theory (DFT)
- 3 December 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 337 (Pt 1) , 149438
Cactus cladodes as a renewable source of cellulose for the adsorption of Safranin O and Acid Blue 25 dyes: Optimization of extraction parameters, comprehensive experimental investigation, and mechanistic interpretation via Density Functional Theory (DFT)
- 6 March 2025
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (13) , 7950-7975
Optimization of the degree of deacetylation of chitosan beads for efficient anionic dye adsorption: kinetics, thermodynamics, mechanistic insights via DFT analysis, and regeneration performance
Congo red, a persistent dye widely used in the textile industry, poses significant environmental hazards if not properly treated. In this study, the effectiveness of chitosan beads for removing Congo red from textile wastewater was investigated. A Box-Behnken design was utilized to optimize the degree of deacetylation (DDA) of the chitosan beads, achieving a maximum DDA of 95.79% under the optimal conditions of 100 °C, 300 min reaction time, and 45.91% NaOH concentration. Comprehensive characterization of the synthesized adsorbent was performed using FT-IR, XRD, SEM, and BET analysis, with a BET surface area of 11.5180 m2/g, indicating a substantial surface area for effective adsorption. The adsorption process followed pseudo-second-order kinetics and was best described by the Langmuir model. At pH 6, an adsorbent dose of 0.06 g, and an optimal reaction time of 80 min, a maximum adsorption capacity of 110.37 mg/g was achieved, surpassing the performance of magnetic chitosan (40.12 mg/g) and powdered chitosan (42.48 mg/g). Thermodynamic parameters (ΔH° = 10.91 kJ/mol and ΔG° < 0) indicate that the adsorption process was endothermic and spontaneous. DFT calculations were conducted to elucidate the adsorption mechanism, focusing on the role of benzene rings and oxygen atoms in Congo red as electron donors. These findings demonstrate that chitosan beads are a promising material for the removal of Congo red from contaminated wastewater.
- 6 March 2025
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (13) , 7950-7975
Optimization of the degree of deacetylation of chitosan beads for efficient anionic dye adsorption: kinetics, thermodynamics, mechanistic insights via DFT analysis, and regeneration performance
Congo red, a persistent dye widely used in the textile industry, poses significant environmental hazards if not properly treated. In this study, the effectiveness of chitosan beads for removing Congo red from textile wastewater was investigated. A Box-Behnken design was utilized to optimize the degree of deacetylation (DDA) of the chitosan beads, achieving a maximum DDA of 95.79% under the optimal conditions of 100 °C, 300 min reaction time, and 45.91% NaOH concentration. Comprehensive characterization of the synthesized adsorbent was performed using FT-IR, XRD, SEM, and BET analysis, with a BET surface area of 11.5180 m2/g, indicating a substantial surface area for effective adsorption. The adsorption process followed pseudo-second-order kinetics and was best described by the Langmuir model. At pH 6, an adsorbent dose of 0.06 g, and an optimal reaction time of 80 min, a maximum adsorption capacity of 110.37 mg/g was achieved, surpassing the performance of magnetic chitosan (40.12 mg/g) and powdered chitosan (42.48 mg/g). Thermodynamic parameters (ΔH° = 10.91 kJ/mol and ΔG° < 0) indicate that the adsorption process was endothermic and spontaneous. DFT calculations were conducted to elucidate the adsorption mechanism, focusing on the role of benzene rings and oxygen atoms in Congo red as electron donors. These findings demonstrate that chitosan beads are a promising material for the removal of Congo red from contaminated wastewater.
- Top Cited Papers
- 21 January 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 505
Fabrication of low-cost ceramic nanofiltration membrane from natural resources for the removal of cationic and anionic dyes: Experimental and DFT investigations
- 21 January 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 505
Top Cited PapersFabrication of low-cost ceramic nanofiltration membrane from natural resources for the removal of cationic and anionic dyes: Experimental and DFT investigations
- 3 November 2024
- Published by Elsevier in Waste Management
- Vol. 190, 632-643
Treating waste with waste: Treatment of textile wastewater using upcycled food waste as a pore-forming agent in the fabrication of ceramic membranes employing DOE/FFD design
- 3 November 2024
- Published by Elsevier in Waste Management
- Vol. 190, 632-643
Treating waste with waste: Treatment of textile wastewater using upcycled food waste as a pore-forming agent in the fabrication of ceramic membranes employing DOE/FFD design