Manish Naagar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Manish Naagar has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Atul Thakur
5 shared publicationsSonia Chalia
5 shared publicationsPreeti Thakur
4 shared publicationsFayu Wan
School of Electronics and Information Engineering, Nanjing University of Information Science and Technology, Nanjing, China
2 shared publications- Neeraj Kumar Gahlot
Amity Institute of Aerospace Engineering, Amity University Uttar Pradesh
2 shared publications - Aafrin Shirin Mehboob
Amity Institute of Aerospace Engineering, Amity University Uttar Pradesh 1 , Noida 201303
1 shared publication
Latest Publications
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Staged compression and pneumatic buffering in a tandem-disk aerospike at Mach 2.23
The interaction between a supersonic freestream and a multi-stage aerospike induces complex shock/shear-layer coupling across sequential recirculating cavities. This study maps the steady-state topological regimes of a tandem-disk (Double Disk) aerospike mounted on a hemisphere-cylinder blunt body at Mach 2.23, using a compressible Reynolds-Averaged Navier–Stokes framework closed by the k-omega shear stress transport model and validated against benchmark experiments. Three regimes are identified and mechanistically quantified through mean-field diagnostics: cavity pressure, shear-layer momentum thickness, and convective Mach number. Below a radial threshold (r2/r1 < 2.0), the secondary shock merges with the terminal reattachment system (Regime I); crossing the threshold pressurizes the primary cavity from P/P∞ ≈ 1.05 to ≈1.6 and decouples the intermediate shock. A forward-biased secondary disk (l2/l1 = 2.0) then traps a compressed vortex (P/P∞ ≈ 1.95) that acts as a pneumatic buffer registered as a monotonically intensifying thrust on the primary-disk back face and restructures the single normal-shock compression into a staged pressure staircase (Regime II). Extending the spike beyond L/D (L:Length of Spike & D: Hemispherical Body Diameter) of 1.0 collapses this buffer: with the convective Mach number above unity at both lengths, shear-layer growth is compressibility-suppressed, and breakdown arises from accumulated growth over the doubled residence length, evidenced by a reversal of the momentum-thickness trajectory (0.668 → 0.551 mm vs 0.613 → 0.733 mm) and buffer decompression (Regime III). In full three-dimensional simulations, the optimal configuration reduces payload drag by 82.8% relative to the bare blunt body (42.8% vs a single aerospike) and net-assembly drag by 46.7%, while suppressing the integrated payload thermal load by 9.1% relative to a single aerospike and demonstrating a load-shifting mechanism that trades sacrificial disk compression and a spatially concentrated heating footprint for superior overall payload protection.
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Staged compression and pneumatic buffering in a tandem-disk aerospike at Mach 2.23
The interaction between a supersonic freestream and a multi-stage aerospike induces complex shock/shear-layer coupling across sequential recirculating cavities. This study maps the steady-state topological regimes of a tandem-disk (Double Disk) aerospike mounted on a hemisphere-cylinder blunt body at Mach 2.23, using a compressible Reynolds-Averaged Navier–Stokes framework closed by the k-omega shear stress transport model and validated against benchmark experiments. Three regimes are identified and mechanistically quantified through mean-field diagnostics: cavity pressure, shear-layer momentum thickness, and convective Mach number. Below a radial threshold (r2/r1 < 2.0), the secondary shock merges with the terminal reattachment system (Regime I); crossing the threshold pressurizes the primary cavity from P/P∞ ≈ 1.05 to ≈1.6 and decouples the intermediate shock. A forward-biased secondary disk (l2/l1 = 2.0) then traps a compressed vortex (P/P∞ ≈ 1.95) that acts as a pneumatic buffer registered as a monotonically intensifying thrust on the primary-disk back face and restructures the single normal-shock compression into a staged pressure staircase (Regime II). Extending the spike beyond L/D (L:Length of Spike & D: Hemispherical Body Diameter) of 1.0 collapses this buffer: with the convective Mach number above unity at both lengths, shear-layer growth is compressibility-suppressed, and breakdown arises from accumulated growth over the doubled residence length, evidenced by a reversal of the momentum-thickness trajectory (0.668 → 0.551 mm vs 0.613 → 0.733 mm) and buffer decompression (Regime III). In full three-dimensional simulations, the optimal configuration reduces payload drag by 82.8% relative to the bare blunt body (42.8% vs a single aerospike) and net-assembly drag by 46.7%, while suppressing the integrated payload thermal load by 9.1% relative to a single aerospike and demonstrating a load-shifting mechanism that trades sacrificial disk compression and a spatially concentrated heating footprint for superior overall payload protection.
- 16 September 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 151 (21) , 17837-17869
MOF-derived nano-additives in solid propellants: a systematic review of structure-controlled thermal decomposition and combustion behavior
- 16 September 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 151 (21) , 17837-17869
MOF-derived nano-additives in solid propellants: a systematic review of structure-controlled thermal decomposition and combustion behavior
- 31 August 2026
- Published by Springer Nature in Emergent Materials
- Vol. 9 (9) , 221
Size-dependent catalytic amplification by organometallic nanocatalysts in ammonium perchlorate based composite propellants: a systematic review (2020–2025)
- 31 August 2026
- Published by Springer Nature in Emergent Materials
- Vol. 9 (9) , 221
Size-dependent catalytic amplification by organometallic nanocatalysts in ammonium perchlorate based composite propellants: a systematic review (2020–2025)
- 27 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (5) , 6595-6609
MgxCo1-xFe2O4 magnetic nanoadsorbents for residual triiodide removal from iodinated water to control I-DBP precursors: Structure–performance correlation and dosage optimization
- 27 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (5) , 6595-6609
MgxCo1-xFe2O4 magnetic nanoadsorbents for residual triiodide removal from iodinated water to control I-DBP precursors: Structure–performance correlation and dosage optimization
- 3 December 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (58) , 66302-66317
New insights into residual triiodide ion removal from iodinated water using magnetic CoFe2O4 nanoparticles: exploring adsorption behavior and mechanisms
This study evaluates the adsorption performance of cobalt ferrite (CoFe2O4)–based magnetic nanoadsorbents (CF-MagNa) for the removal of triiodide ions (\({I}_{3}^{-}\)) from iodinated water. The crystalline structure and phase purity of the synthesized material were confirmed via X-ray diffraction (XRD), which determined a crystallite size of 42 nm and a specific surface area of 26.98 m2/g. Field emission scanning electron microscopy (FESEM) revealed a porous morphology conducive to enhanced adsorption. The ferromagnetic properties of CF-MagNa were characterized using vibrating sample magnetometry (VSM), which demonstrated a saturation magnetization (σs) of 74.98 emu/g, a remanent magnetization (σr) of 29.82 emu/g, and a coercivity (Hc) of 1304 Oe, significant magnetic separation potential. Batch adsorption experiments revealed a 61.6% reduction in \({I}_{3}^{-}\) concentration at a CF-MagNa dosage of 2 mg/mL. Adsorption isotherms were analyzed, with the Langmuir model yielding a maximum adsorption capacity (Qmax) of 13.641 mg/g and a Langmuir constant (KL) of 0.00996 L/mg. The Freundlich model provided a capacity factor (KF) of 1.892 mg/g and a heterogeneity factor (nF) of 1.805 L/mg, while the Temkin model yielded a heat of adsorption (B) of 3.404 J/mol and a Temkin constant (KT) of 0.743 L/g. The Dubinin-Radushkevich (D-R) isotherm demonstrated the highest correlation (R2 = 0.97), with a maximum adsorption capacity of 8.28 mg/g. These results highlight CF-MagNa’s efficacy as a potential adsorbent for water treatment, with promising applications in environmental remediation and sustainable water purification technologies.- 3 December 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (58) , 66302-66317
New insights into residual triiodide ion removal from iodinated water using magnetic CoFe2O4 nanoparticles: exploring adsorption behavior and mechanisms
This study evaluates the adsorption performance of cobalt ferrite (CoFe2O4)–based magnetic nanoadsorbents (CF-MagNa) for the removal of triiodide ions (\({I}_{3}^{-}\)) from iodinated water. The crystalline structure and phase purity of the synthesized material were confirmed via X-ray diffraction (XRD), which determined a crystallite size of 42 nm and a specific surface area of 26.98 m2/g. Field emission scanning electron microscopy (FESEM) revealed a porous morphology conducive to enhanced adsorption. The ferromagnetic properties of CF-MagNa were characterized using vibrating sample magnetometry (VSM), which demonstrated a saturation magnetization (σs) of 74.98 emu/g, a remanent magnetization (σr) of 29.82 emu/g, and a coercivity (Hc) of 1304 Oe, significant magnetic separation potential. Batch adsorption experiments revealed a 61.6% reduction in \({I}_{3}^{-}\) concentration at a CF-MagNa dosage of 2 mg/mL. Adsorption isotherms were analyzed, with the Langmuir model yielding a maximum adsorption capacity (Qmax) of 13.641 mg/g and a Langmuir constant (KL) of 0.00996 L/mg. The Freundlich model provided a capacity factor (KF) of 1.892 mg/g and a heterogeneity factor (nF) of 1.805 L/mg, while the Temkin model yielded a heat of adsorption (B) of 3.404 J/mol and a Temkin constant (KT) of 0.743 L/g. The Dubinin-Radushkevich (D-R) isotherm demonstrated the highest correlation (R2 = 0.97), with a maximum adsorption capacity of 8.28 mg/g. These results highlight CF-MagNa’s efficacy as a potential adsorbent for water treatment, with promising applications in environmental remediation and sustainable water purification technologies.- 2 April 2024
- Published by Springer Nature in Advances in Astronautics Science and Technology
- Vol. 7 (3-4) , 209-220
Numerical Investigation on Supersonic Airflow Around Tangent Ogive Wedge of Varying Fineness Ratio
- 2 April 2024
- Published by Springer Nature in Advances in Astronautics Science and Technology
- Vol. 7 (3-4) , 209-220
Numerical Investigation on Supersonic Airflow Around Tangent Ogive Wedge of Varying Fineness Ratio
- 1 February 2024
- Published by Bentham Science Publishers Ltd. in Current Materials Science
- Vol. 18 (4) , 429-442
Tuning Microstructural Attributes of Spinel Cobalt Ferrite (CoFe2O4) Nanoparticles through Annealing Temperature
Background: The study systematically investigates the influence of annealing temperatures, ranging from 500°C to 900°C with 100°C increments, on the microstructural characteristics of cobalt ferrite (CoFe2O4) nanoparticles. Methods: The nanoparticles, with sizes between 7-18 nm, were synthesized using the co-precipitation method. X-ray diffraction (XRD) analysis reveals that higher annealing temperatures correspond to noticeable increases in crystallite size, lattice parameter, unit cell volume, and interatomic distances within both octahedral and tetrahedral sites. Concurrently, a substantial decrease is observed in the average theoretical X-ray density, dislocation density, and microstructural strain. This investigation elucidates the underlying physical and chemical processes driving these transformations. To explore and quantify the intricate relationships between annealing temperature and various microstructural attributes of CoFe2O4 nanoparticles, Pearson’s correlation coefficient (r) serves as a robust statistical tool. The study establishes significant associations and elucidates the strength and direction of these correlations. Results: Regression analysis yields highly robust correlations (Adjusted R-Squared > 0.99) between microstructural features and annealing temperature. These correlations provide valuable predictive insights into microstructural characteristics, offering substantial support for optimizing CoFe2O4 nanoparticle applications across a temperature range spanning from 500°C to 900°C. Conclusion: This research contributes to the scientific understanding of materials engineering and offers practical guidance for applications requiring precise control over nanoparticle properties.
- 1 February 2024
- Published by Bentham Science Publishers Ltd. in Current Materials Science
- Vol. 18 (4) , 429-442
Tuning Microstructural Attributes of Spinel Cobalt Ferrite (CoFe2O4) Nanoparticles through Annealing Temperature
Background: The study systematically investigates the influence of annealing temperatures, ranging from 500°C to 900°C with 100°C increments, on the microstructural characteristics of cobalt ferrite (CoFe2O4) nanoparticles. Methods: The nanoparticles, with sizes between 7-18 nm, were synthesized using the co-precipitation method. X-ray diffraction (XRD) analysis reveals that higher annealing temperatures correspond to noticeable increases in crystallite size, lattice parameter, unit cell volume, and interatomic distances within both octahedral and tetrahedral sites. Concurrently, a substantial decrease is observed in the average theoretical X-ray density, dislocation density, and microstructural strain. This investigation elucidates the underlying physical and chemical processes driving these transformations. To explore and quantify the intricate relationships between annealing temperature and various microstructural attributes of CoFe2O4 nanoparticles, Pearson’s correlation coefficient (r) serves as a robust statistical tool. The study establishes significant associations and elucidates the strength and direction of these correlations. Results: Regression analysis yields highly robust correlations (Adjusted R-Squared > 0.99) between microstructural features and annealing temperature. These correlations provide valuable predictive insights into microstructural characteristics, offering substantial support for optimizing CoFe2O4 nanoparticle applications across a temperature range spanning from 500°C to 900°C. Conclusion: This research contributes to the scientific understanding of materials engineering and offers practical guidance for applications requiring precise control over nanoparticle properties.