ZCZiqiang Chen

Ziqiang Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ziqiang Chen has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Self-Balancing Bipedal Exoskeleton AutoLEE-G3 With Bioinspired Design and Control

    by Dingkui Tian, Ziqiang Chen, Sida Du, Li Zhang, Xinyu Wu

    This article presents the mechanism design, balanced walking control strategy, and experimental implementation of a self-balancing bipedal exoskeleton (SBBE) AutoLEE-G3. Based on the anatomical structures of the lower limbs of human, we developed a bioinspired 12 actuated-joint prototype, AutoLEE-G3, which can assist all lower limb joints of the wearer, with motions including hip abduction/adduction, hip flexion/extension, hip internal/external rotation, knee flexion/extension, ankle inversion/eversion, and ankle dorsi flexion/plantar flexion during walking. Subsequently, a viscoelastic-compliance-based balance controller (VCBC) was proposed to reduce the detrimental influence of impact forces on the SBBE's balance performance. Furthermore, the VCBC is based on centroid dynamics, and its control performance is independent of the distributed mass of the exoskeleton and the wearer, which is highly advantageous for the balance control of SBBEs, as the distributed mass of the exoskeleton, particularly that of the wearer, is difficult to measure accurately. Finally, the validity of the self-balancing and locomotion capabilities of AutoLEE-G3 is successfully confirmed through straight-line and turning walking experiments involving both a dummy subject and two human subjects.

  • A Robust Following Controller for Lower Limb Exoskeletons With a Decoding Human Motion Intention Network Under Small Sample Conditions

    by Feng Li, Ziqiang Chen, Ming Yang, Dingkui Tian, Fei Gao, Xinyu Wu

    It is still an unresolved challenge to achieve natural and stable human– robot interaction control for lower limb exoskeletons (LLEs). The purpose of this article is to provide a new framework for human–robot interaction control of LLEs. First, we designed the generative adversarial network-based graph transformer (GANGT) for application under small sample surface electromyography (sEMG) dataset conditions. The adversarial learning is utilized to generate featured sEMG data, and graph structure-based temporal and spatial self-attention mechanisms are constructed to capture the local and global features of the sEMG signal during a gait cycle. Second, we designed a robust following controller to control the tracking error of the predicted joint angles and proved its stability through the Lyapunov function. The controller is able to maintain the tracking error within a small bound in the case of unmodeled errors and external disturbances in the dynamical system of the exoskeleton. To validate the effectiveness of the control framework, we conducted a series of experiments with recruited subjects. GANGT demonstrated a better ability to generate hip (RMSE 2.7546 $^{\circ }$ ) and knee (RMSE 4.5206 $^{\circ }$ ) trajectories in ablation and comparison experiments. The means of the absolute tracking errors for the hip and knee of the exoskeleton under both the level autonomous walking condition and the uphill autonomous walking condition were 0.0846 $^{\circ }$ and 0.1210 $^{\circ }$ , respectively.


  • Bionic Design and Control of a 12-DoF Self-Balancing Walking Exoskeleton

    by DingKui Tian, Yong He, Ziqiang Chen, Feng Li, Jinke Li, Meng Yin, Li Zhang, XinYu Wu

    Self-balancing walking exoskeletons (SBWEs), which enable paralyzed individuals to walk without assistive devices, have been increasingly employed in rehabilitation training. This paper proposes a Kelvin-Voigt viscoelastic model-based bioinspired viscoelastic compliance controller (BVCC) for a novel SBWE named AutoLEE-II, which features high structural rigidity, low leg inertia relative to center of mass (CoM), and small hip joint axis misalignment between the user and SBWE. First, a novel series-parallel hybrid mechanism is designed for AutoLEE-II. This mechanism, inspired by the lower limbs of humans, reduces hip axis misalignment between the user and SBWE, decreases leg inertia relative to CoM, and improves structural stiffness. Second, a BVCC mimicking biological muscle is proposed to introduce viscoelastic compliance to SBWE to maintain locomotion stability of the SBWE during standing and walking. The BVCC is robust to the variable physical parameters of different users. Finally, self-balancing walking experiments are conducted with AutoLEE-II with empty load, manikin load and human subject load to validate the performance of AutoLEE-II and the proposed compliance controller BVCC. Note to Practitioners —This paper aims to design a self-balancing walking exoskeleton (SBWE) that provides rehabilitation training exercise and walking assistance services for individuals with hemiplegia, paraplegia, and quadriplegia. First, we biomimetically designed the mechanical structure of the SBWE, named AutoLEE-II based on the distribution of human joints and connecting links. The bionic mechanism reduces axis misalignment between the SBWE and users, improves stiffness and reduces the inertia of the legs relative to center of mass. We then designed a bioinspired viscoelastic compliance controller (BVCC) based on the centroid dynamics model, which is robust to the physical properties of the user and introduces the SBWE with active compliance. Finally, self-balancing walking experiments with an empty load, a manikin load and human subject loads are performed to validate mechanical structure of the proposed AutoLEE-II and the locomotion stability of the physical parameter robust BVCC.


  • A Knowledge Transfer-Based Personalized Human–Robot Interaction Control Method for Lower Limb Exoskeletons

    by Ming Yang, Dingkui Tian, Feng Li, Ziqiang Chen, Yuanpei Zhu, Weiwei Shang, Li Zhang, Xinyu Wu

    Accurate intent recognition by patients while wearing exoskeletons is crucial during their rehabilitation exercises. In this paper, a cross-subject knowledge transfer learning framework based on Transformer network (EMGTnet-KTD) is proposed to predict human movement intentions in human-robot interactions through surface electromyography (sEMG) signals. EMGTnet-KTD consists of a pre-trained EMGTnet model and a knowledge transfer module. First, EMGTnet is designed based on Transformer network. A temporal and spatial domain feature fusion module has been introduced on top of the Transformer network, and the inputs have been reconfigured to enable it to utilize the relationship between before and after human actions. Additionally, the knowledge transfer module is composed of a feature extraction layer, a noise reduction layer and the personalized human lower limb dynamics controller. To evaluate the effectiveness of the proposed method, an experimental validation on our self-collected dataset from seven subjects is performed. The results show that our method achieves better results than other continuous motion prediction methods. Finally, to validate that the generation angle conforms to human physiology, walking experiments involving the use of exoskeleton are conducted. The experiments demonstrates the effectiveness of the proposed framework and its implementability for exoskeletons.


  • Biomimetic Viscoelastic Compliance Control for Self-Balancing Lower Limb Exoskeleton

    by Dingkui Tian, Wanxiang Wang, Feng Li, Ziqiang Chen, Yong He, Jinke Li, Li Zhang, Xinyu Wu

    Animals, including humans that have muscles with viscoelastic compliance can achieve improved stability. Hence, we investigate a biomimetic control framework with viscoelastic compliance and subsequently apply it to a self-balancing lower limb exoskeleton robot (SBLLER), to ensure stability during locomotion. This article presents a novel biomimetic viscoelastic compliance control framework (VCCF) for an SBLLER that enables wearers to walk without the need for crutches or other external stabilization tools during self-balancing locomotion and rehabilitation training tasks. First, we devised a biomimetic viscoelastic mathematical model (BVMM) and subsequently analyzed its viscoelastic properties. Second, the VCCF, which incorporates the desired and real center of mass (CoM) and a BVMM that connects the desired and real CoMs, is designed to introduce active viscoelastic compliance for an SBLLER so that the SBLLER can absorb the early landing impact forces and stabilize itself. In addition, the VCCF exhibits robustness to the physical parameters of diverse wearers and can effectively accommodate a wide range of subjects, which is essential for promoting the application of exoskeletons. Finally, the validity of the proposed VCCF is confirmed through disturbance and walking experiments.


  • Dual-Loop Control Framework of a Self-Balancing Lower-Limb Exoskeleton for Assisted Walking

    by Dingkui Tian, Ziqiang Chen, Feng Li, Ming Yang, Jinke Li, Wentao Li, Yong He, Li Zhang, Xinyu Wu

    This paper describes a dual-loop control framework of self-balancing lower-limb exoskeletons (SBLLEs) to estimate deformations and to stabilize SBLLEs for assisted walking tasks conducted on wearers with diverse physical parameters. First, considering the nonlinear time-varying characteristic of deformation and the time dependency and periodic nature of walking motion, a bidirectional long short-term memory (Bi-LSTM) neural network is utilized to estimate multiple deformations. In particular, the force sensor and Bi-LSTM-based deformation estimator (FBDE) loop are used to estimate and compensate for the deformation based on the force and moment signals. Second, a physical parameter-independent controller (PPIC) based on centroidal dynamics is proposed to stabilize exoskeletons that can accommodate wearers with varying physical parameters. The PPIC loop is also based on force and moment signals, indicating that only six-dimensional force sensors are necessary to estimate deformation and stabilize SBLLEs. Finally, a series of experiments is conducted on three subjects with varying physical parameters to validate the effectiveness of the dual-loop control framework. The results of walking experiments show that the dual-loop control framework can estimate deformation and stabilize the SBLLE during walking under different loads.


  • Deformation Estimator Network-Based Feedback Control for Wearable Exoskeleton With Body Disturbances: Toward Stable and Dynamic Walking

    by Dingkui Tian, Feng Li, Ming Yang, Ziqiang Chen, Jinke Li, Zhengkun Yi, Li Zhang, Xinyu Wu

    Accurately estimating uncertain body disturbances is critical for the effective integration of wearable exoskeletons for active human users. In this article, considering nonlinear time-varying human disturbances, we propose a TDE-BVC feedback control method that performs biomimetic viscoelastic compliance (BVC) with transformer-based deformation estimator (TDE). The method provides human-exoskeleton with stable and dynamic walking capabilities. We developed a transformer-based end-to-end deformation estimation sequence network that simultaneously captures the mapping relationship between foot force/torque and exoskeleton deformation. Moreover, we integrated the BVC to eliminate the impact and external disturbances experienced by the human-exoskeleton, enabling it to closely follow a reference gait, and utilized Lyapunov’s theorem to prove its stability. The control strategy is independent of the parameters of the human exoskeleton. To evaluate the effectiveness of the proposed method, walking experiments were conducted on different subjects. Our results indicate that with only 6-axis force/torque sensors, the TDE-BVC controller could accurately estimate and compensate for the deformation of different human-exoskeletons in each control cycle $(p\lt 0.001)$ , with robustly stable and adaptive dynamic walking within a bounded control error.


  • Open Access

    Self-Balancing Exoskeleton Robots Designed to Facilitate Multiple Rehabilitation Training Movements

    by Dingkui Tian, Wentao Li, Jinke Li, Feng Li, Ziqiang Chen, Yong He, Jianquan Sun, Xinyu Wu

    This study presents the biomimetic design of the structure and controller of AutoLEE-II, a self-balancing exoskeleton developed to assist patients in performing multiple rehabilitation movements without crutches or other supporting equipment. Its structural design is founded upon the human body structure, with an eliminated axis deviation and a raised CoM of the exoskeleton. The controller is a physical parameter-independent controller based on the CoM modification. Thus, the exoskeleton can adapt to patients with different physical parameters. Five subjects underwent exoskeleton-assisted rehabilitation training experiments, including squatting, tilting, and walking trainings. The results showed that the exoskeleton can assist patients in completing various rehabilitation exercises and help them maintain their balance during the rehabilitation training. This helpful role of the exoskeleton in rehabilitation training is analyzed through an electromyography (EMG) data analysis. The findings revealed that wearing the exoskeleton can reduce the activity of the lower limb muscles by approximately 20–30% when performing the same rehabilitation exercises.