Max Kiewiet
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Max Kiewiet has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Gunther Roelkens
Photonics Research Group, Department of Information Technology, Ghent University imec, Ghent, Belgium
4 shared publications - Maximilien Billet
Ghent University - IMEC
4 shared publications Bart Kuyken
Photonics Research Group, Ghent University-imec
3 shared publications- Bart Kuyken
Photonics Research Group INTEC Ghent University -imec 9052 Ghent Belgium
3 shared publications - Dries Van Thourhout
Ghent University - IMEC
3 shared publications - Konstantinos Akritidis
Photonics Research Group, INTEC Department, Ghent University – imec, 1 Ghent 9052
3 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (7)
Heterogeneously integrated evanescently coupled lasers emitting in the submicrometre wavelength range
Owing to its broad transparency window, ultra-low propagation losses, and compatibility with complementary metal–oxide–semiconductor (CMOS) fabrication processes, silicon nitride (SiN) has emerged as a highly attractive platform for extending integrated photonics into the visible and near-infrared spectrum. By incorporating active components such as modulators, light sources, and detectors, complex photonic systems with unprecedented functionality and performance become possible. These systems enable a wide range of applications, including biosensing, on-chip spectroscopy, imaging, and quantum computing. However, the low refractive index of SiN relative to III–V gain materials poses a major challenge for implementing evanescently coupled lasers, the dominant coupling scheme in silicon photonics at the telecommunication wavelengths. Although a silicon intermediate layer is often used to alleviate this mismatch, its strong absorption at shorter wavelengths precludes its use. Here, we present an integration strategy that overcomes this limitation by employing a CMOS-compatible a-Si:H layer with two etch depths, which was engineered to achieve the required optical properties at shorter wavelengths. This intermediate structure enables efficient vertical coupling between the SiN photonic circuit and a micro-transfer-printed GaAs-based semiconductor optical amplifier. Using this scheme, we demonstrate on-chip amplification with a gain of more than 13 dB as well as lasing in the submicrometre wavelength range. Finally, we showcase the versatility of this process by integrating a second amplifier stage following the laser, achieving on-chip output powers exceeding 4 mW. These results highlight the potential of this method for developing fully integrated evanescently coupled laser systems operating in the near-infrared band.
- 1 July 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (7)
Open AccessHeterogeneously integrated evanescently coupled lasers emitting in the submicrometre wavelength range
Owing to its broad transparency window, ultra-low propagation losses, and compatibility with complementary metal–oxide–semiconductor (CMOS) fabrication processes, silicon nitride (SiN) has emerged as a highly attractive platform for extending integrated photonics into the visible and near-infrared spectrum. By incorporating active components such as modulators, light sources, and detectors, complex photonic systems with unprecedented functionality and performance become possible. These systems enable a wide range of applications, including biosensing, on-chip spectroscopy, imaging, and quantum computing. However, the low refractive index of SiN relative to III–V gain materials poses a major challenge for implementing evanescently coupled lasers, the dominant coupling scheme in silicon photonics at the telecommunication wavelengths. Although a silicon intermediate layer is often used to alleviate this mismatch, its strong absorption at shorter wavelengths precludes its use. Here, we present an integration strategy that overcomes this limitation by employing a CMOS-compatible a-Si:H layer with two etch depths, which was engineered to achieve the required optical properties at shorter wavelengths. This intermediate structure enables efficient vertical coupling between the SiN photonic circuit and a micro-transfer-printed GaAs-based semiconductor optical amplifier. Using this scheme, we demonstrate on-chip amplification with a gain of more than 13 dB as well as lasing in the submicrometre wavelength range. Finally, we showcase the versatility of this process by integrating a second amplifier stage following the laser, achieving on-chip output powers exceeding 4 mW. These results highlight the potential of this method for developing fully integrated evanescently coupled laser systems operating in the near-infrared band.
- Open Access
- 30 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-16
Micro-Transfer Printing on Silicon Photonics: Tutorial, Recent Progress and Outlook
This paper highlights micro-transfer printing (MTP) as a promising scalable approach to heterogeneous integration for silicon photonics. MTP uniquely achieves high integration density, high throughput, and high material efficiency through a low-temperature, back-end integration process. Current demonstrations, including integrated III-V lasers and thin-film electro-optic modulators, confirm MTP's potential. Industrial adoption requires resolving challenges related to final integration yield and throughput, device reliability, and supply chain maturity.
- 30 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-16
Open AccessMicro-Transfer Printing on Silicon Photonics: Tutorial, Recent Progress and Outlook
This paper highlights micro-transfer printing (MTP) as a promising scalable approach to heterogeneous integration for silicon photonics. MTP uniquely achieves high integration density, high throughput, and high material efficiency through a low-temperature, back-end integration process. Current demonstrations, including integrated III-V lasers and thin-film electro-optic modulators, confirm MTP's potential. Industrial adoption requires resolving challenges related to final integration yield and throughput, device reliability, and supply chain maturity.
- Open Access
- 20 November 2025
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (7)
Micro‐Transfer Printed Continuous‐Wave and Mode‐Locked Laser Integration at 800 nm on a Silicon Nitride Platform
Applications such as augmented and virtual reality (AR/VR), optical atomic clocks, and quantum computing require photonic integration of (near‐)visible laser sources to enable commercialization at scale. The heterogeneous integration of III‐V optical gain materials with low–loss silicon nitride waveguides enables complex photonic circuits with low‐noise lasers on a single chip. Previous such demonstrations are mostly geared toward telecommunication wavelengths. At shorter wavelengths, limited options exist for efficient light coupling between III‐V and silicon nitride waveguides. Recent advances in wafer‐bonded devices at these wavelengths require complex coupling structures and suffer from poor heat dissipation. Here, we overcome these challenges and demonstrate a wafer‐scale micro‐transfer printing method integrating functional III‐V devices directly onto the silicon substrate of a commercial silicon nitride platform. We show butt‐coupling of efficient GaAs‐based amplifiers operating at 800 nm with integrated saturable absorbers to silicon nitride cavities. This resulted in extended‐cavity continuous‐wave and mode‐locked lasers generating pulse trains with repetition rates ranging from 3.2 to 9.2 GHz and excellent passive stability with a fundamental radio‐frequency linewidth of 519 Hz. These results show the potential to build complex, high‐performance, fully‐integrated laser systems at 800 nm using scalable manufacturing, promising advances for AR/VR, nonlinear photonics, timekeeping, quantum computing, and beyond.
- 20 November 2025
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (7)
Open AccessMicro‐Transfer Printed Continuous‐Wave and Mode‐Locked Laser Integration at 800 nm on a Silicon Nitride Platform
Applications such as augmented and virtual reality (AR/VR), optical atomic clocks, and quantum computing require photonic integration of (near‐)visible laser sources to enable commercialization at scale. The heterogeneous integration of III‐V optical gain materials with low–loss silicon nitride waveguides enables complex photonic circuits with low‐noise lasers on a single chip. Previous such demonstrations are mostly geared toward telecommunication wavelengths. At shorter wavelengths, limited options exist for efficient light coupling between III‐V and silicon nitride waveguides. Recent advances in wafer‐bonded devices at these wavelengths require complex coupling structures and suffer from poor heat dissipation. Here, we overcome these challenges and demonstrate a wafer‐scale micro‐transfer printing method integrating functional III‐V devices directly onto the silicon substrate of a commercial silicon nitride platform. We show butt‐coupling of efficient GaAs‐based amplifiers operating at 800 nm with integrated saturable absorbers to silicon nitride cavities. This resulted in extended‐cavity continuous‐wave and mode‐locked lasers generating pulse trains with repetition rates ranging from 3.2 to 9.2 GHz and excellent passive stability with a fundamental radio‐frequency linewidth of 519 Hz. These results show the potential to build complex, high‐performance, fully‐integrated laser systems at 800 nm using scalable manufacturing, promising advances for AR/VR, nonlinear photonics, timekeeping, quantum computing, and beyond.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7207-7210
Compact microgear reflector-based laser heterogeneously integrated on a SiN platform
We report on heterogeneously integrated continuous-wave (CW) lasers on a SiN platform that employ a microgear as a wavelength-selective reflector. Heterogeneous integration is realized through micro-transfer printing (µTP), enabling compact, robust, and frequency-stable on-chip lasers without the need for phase shifters. The devices achieve up to 12.1 mW of on-chip optical output power and intrinsic linewidths as narrow as 3.7 kHz, highlighting the tradeoff between output coupling and coherence. The laser devices operate in single mode with side-mode suppression ratios exceeding 45 dB, and have a compact footprint of 4000 × 250 µm 2 . These results demonstrate a promising path to integrated lasers for coherent communications and LiDAR.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7207-7210
Compact microgear reflector-based laser heterogeneously integrated on a SiN platform
We report on heterogeneously integrated continuous-wave (CW) lasers on a SiN platform that employ a microgear as a wavelength-selective reflector. Heterogeneous integration is realized through micro-transfer printing (µTP), enabling compact, robust, and frequency-stable on-chip lasers without the need for phase shifters. The devices achieve up to 12.1 mW of on-chip optical output power and intrinsic linewidths as narrow as 3.7 kHz, highlighting the tradeoff between output coupling and coherence. The laser devices operate in single mode with side-mode suppression ratios exceeding 45 dB, and have a compact footprint of 4000 × 250 µm 2 . These results demonstrate a promising path to integrated lasers for coherent communications and LiDAR.
- Open Access
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (15) , 7265-7269
Ultra-Low Loss and Large Bandwidth Fiber-to-Chip Edge Coupler for Aluminum Oxide Photonic Platform at UV-Visible Wavelengths
Achieving low-loss coupling between single-mode fibers and photonic integrated circuits plays a crucial role in emerging enabling technologies including quantum information, advanced imaging, and precision metrology. High coupling efficiency in the UV/visible spectrum remains challenging due to the small waveguide dimensions at shorter wavelengths. Here, we present an ultra-low loss edge coupler made of a SiOx/AlOx mode converter. The coupling loss between a standard single-mode fiber and an AlOx waveguide below 0.31 dB and 0.62 dB is experimentally demonstrated at a working wavelength of 375 nm and 405 nm, respectively. The design exhibits a large bandwidth of 110 nm below 2.6-dB loss over the entire operating wavelength range of the single mode fiber, as obtained from the simulation. This coupler not only facilitates low-loss fiber-to-chip coupling but also significantly reduces spurious light scattering, making it particularly valuable for applications in PIC-based far-field advanced microscopy and trapped-ion quantum information systems.
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (15) , 7265-7269
Open AccessUltra-Low Loss and Large Bandwidth Fiber-to-Chip Edge Coupler for Aluminum Oxide Photonic Platform at UV-Visible Wavelengths
Achieving low-loss coupling between single-mode fibers and photonic integrated circuits plays a crucial role in emerging enabling technologies including quantum information, advanced imaging, and precision metrology. High coupling efficiency in the UV/visible spectrum remains challenging due to the small waveguide dimensions at shorter wavelengths. Here, we present an ultra-low loss edge coupler made of a SiOx/AlOx mode converter. The coupling loss between a standard single-mode fiber and an AlOx waveguide below 0.31 dB and 0.62 dB is experimentally demonstrated at a working wavelength of 375 nm and 405 nm, respectively. The design exhibits a large bandwidth of 110 nm below 2.6-dB loss over the entire operating wavelength range of the single mode fiber, as obtained from the simulation. This coupler not only facilitates low-loss fiber-to-chip coupling but also significantly reduces spurious light scattering, making it particularly valuable for applications in PIC-based far-field advanced microscopy and trapped-ion quantum information systems.
- Open Access
- 1 May 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (5)
On-chip quasi-light storage for long optical delays using Brillouin scattering
Efficient and extended light storage mechanisms are pivotal in photonics, particularly in optical communications, microwave photonics, and quantum networks, as they offer a direct route to circumvent electrical conversion losses and surmount bandwidth constraints. Stimulated Brillouin Scattering (SBS) is an established method to store optical information by transferring it to the acoustic domain, but current on-chip SBS efforts have limited bandwidth or storage time due to the phonon lifetime of several nanoseconds. An alternate approach known as quasi-light storage (QLS), which involves the creation of delayed replicas of optical data pulses via SBS in conjunction with a frequency comb, has been proposed to lift the storage time constraint; however, its realization has been confined to lengthy optical fibers, constraining integration with on-chip optical elements and form factors. Here, we present an experimental demonstration of QLS on a photonic chip leveraging the large SBS gain of chalcogenide glass, achieving delays of up to 500 ns for 1 ns long signal pulses, surpassing typical Brillouin storage processes' acoustic lifetime by more than an order of magnitude and waveguide transit time by two orders of magnitude. We experimentally and numerically investigate the dynamics of on-chip QLS and reveal that the interplay between the acoustic wave that stores the optical signal and subsequent optical pump pulses leads to a reshaping of the acoustic field. Our demonstrations illustrate the potential for achieving ultra-long storage times of individual pulses by several hundred pulse widths, marking a significant stride toward advancing the field of all-optical storage and delay mechanisms.
- 1 May 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (5)
Open AccessOn-chip quasi-light storage for long optical delays using Brillouin scattering
Efficient and extended light storage mechanisms are pivotal in photonics, particularly in optical communications, microwave photonics, and quantum networks, as they offer a direct route to circumvent electrical conversion losses and surmount bandwidth constraints. Stimulated Brillouin Scattering (SBS) is an established method to store optical information by transferring it to the acoustic domain, but current on-chip SBS efforts have limited bandwidth or storage time due to the phonon lifetime of several nanoseconds. An alternate approach known as quasi-light storage (QLS), which involves the creation of delayed replicas of optical data pulses via SBS in conjunction with a frequency comb, has been proposed to lift the storage time constraint; however, its realization has been confined to lengthy optical fibers, constraining integration with on-chip optical elements and form factors. Here, we present an experimental demonstration of QLS on a photonic chip leveraging the large SBS gain of chalcogenide glass, achieving delays of up to 500 ns for 1 ns long signal pulses, surpassing typical Brillouin storage processes' acoustic lifetime by more than an order of magnitude and waveguide transit time by two orders of magnitude. We experimentally and numerically investigate the dynamics of on-chip QLS and reveal that the interplay between the acoustic wave that stores the optical signal and subsequent optical pump pulses leads to a reshaping of the acoustic field. Our demonstrations illustrate the potential for achieving ultra-long storage times of individual pulses by several hundred pulse widths, marking a significant stride toward advancing the field of all-optical storage and delay mechanisms.
- Top Cited PapersOpen Access
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Present and future of micro-transfer printing for heterogeneous photonic integrated circuits
We present the current state of the art in micro-transfer printing for heterogeneously integrated silicon photonic integrated circuits. The versatility of the technology is highlighted, as is the way ahead to make this technology a key enabler for next-generation photonic systems-on-chip.
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Top Cited PapersOpen AccessPresent and future of micro-transfer printing for heterogeneous photonic integrated circuits
We present the current state of the art in micro-transfer printing for heterogeneously integrated silicon photonic integrated circuits. The versatility of the technology is highlighted, as is the way ahead to make this technology a key enabler for next-generation photonic systems-on-chip.