YQYuan Qin

Yuan Qin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuan Qin has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Flow topology transformation for planar shock/cylindrical boundary layer interactions with varying incident shock intensity

    by Fang-Bo Li, Zai-Jie Liu, Yuan Qin, He-Xia Huang, Hui-Jun Tan, Yao-Yu Xu, Hang Yu, Ruo-Fan Du

    Three-dimensional flow topologies and shock structure transformations in planar incident shock/cylindrical boundary layer interactions under varying incident shock intensities are systematically investigated. Based on a combined experimental and numerical approach, quantitative analyses are performed on separation scales, shock refraction characteristics, and wall pressure distributions at deflection angles of 12.5°, 15°, 17.5°, and 20° in Mach 2.0 flow. Results indicate that the shock reflection configuration is primarily governed by incident shock intensity, transitioning from regular reflection to Mach reflection with increasing strength, delineating two distinct regimes: regular reflection-dominant and Mach reflection-dominant flows, characterized by the refraction of compression waves and expansion waves above the separation region. Increasing incident shock strength further leads to enlarged separation bubbles and reduced curvature of the primary separation lines. Notably, wall pressure distributions follow a quasi-two-dimensional elliptical similarity law within the central region, which remains valid under various incident shock intensities, while significant breakdown of this similarity occurs in peripheral regions where low-energy fluid accumulation replaces reversed flow. Dominated by the finite spanwise width of the planar incident shock, highly pronounced three-dimensional effects emerge along the cylindrical surface, featured by lateral low-energy fluid aggregation and increased separation shock angles on both sides. The overall flow topology on the cylinder wall is further characterized by the symmetrical primary separation line with swept-back shape, which essentially depicted the near-wall flow structures and further highlights the intrinsic three-dimensionality of the shock–boundary layer interaction behavior.

  • Design concept of compression wave and opposite cowl shock configuration for hypersonic inlet with inward deflecting cowl

    by Xue-Bin Tang, Jia Cai, Zai-Jie Liu, He-Xia Huang, Yuan Qin, Kun Wang, Hui-Jun Tan, Ye Tian

    The horizontal external surface of inlet cowl can effectively reduce external drag on the hypersonic inlet. However, this configuration simultaneously requires an inward turning of cowl's inner contour, resulting in significant intensification of the cowl shock. To mitigate the high total-pressure loss caused by cowl shock and alleviate strong shock wave/boundary layer interactions, this study proposes a configuration design concept of compression waves/opposite cowl shock interaction, building upon prior research [Tang et al., “On the centered-compression waves/cowl shock interaction from opposite-family in hypersonic inlet with inward deflection cowl: An inviscid perspective,” Phys. Fluids 37, 076153 (2025)]. Specifically, a scaling factor (r) is introduced to proportionally adjust the third-stage isentropic compression surface, thereby establishing opposite-family interaction between the compression waves and the cowl shock. To validate this wave configuration methodology for hypersonic inlets, six inward-deflecting-cowl hypersonic inlets featuring geometrically distinct third-stage compression surfaces were designed through controlled variations of both compression method and scaling factor magnitude. Comprehensive numerical simulations characterized their aerodynamic performance and flowfield structures under design (Ma0 = 7.0) and off-design (Ma0 = 6.0, 6.5) conditions. The numerical results reveal that, compared with conventional shock-on-lip (SOL) configurations, the cowl shock progressively attenuates with increasing r, resulting in a remarkable reduction in the scale of the separation bubble induced by the cowl shock and a significant improvement in the total-pressure recovery coefficient. At the design condition, an increase in the scaling factor results in a 32.52%–53.36% enhancement in throat total-pressure recovery coefficient, an 18.55%–30.57% reduction in entropy rise, and a 18.33%–72.01% decrease in the bleeding ratio. The inlet also demonstrates significantly enhanced aerodynamic performance under off-design conditions. Specifically, the mass flow ratio increases notably: at Mach 6.5 and 6.0, it rises by 4.29%–4.70% and 7.25%–8.46%, respectively, compared to the SOL configuration. The consistency in flowfield structures and throat-section aerodynamic parameters between the three-dimensional and two-dimensional inlets further confirms the applicability of the wave-configuration method under three-dimensional conditions. An optimal scaling factor range of 1.50–1.75 is identified, which effectively balances the performance metrics, substantially improving total-pressure recovery coefficient and minimizing the bleeding ratio without significantly compromising the pressure ratio characteristics.


  • Internal flow interaction between three parallel modules within a hypersonic inlet/isolator

    by Jing-Bin Xie, Zai-Jie Liu, He-Xia Huang, Yao-Yu Xu, Yuan Qin, Hui-Jun Tan, Wei-Cheng Qi

  • On the centered-compression waves/cowl shock interaction from opposite-family in hypersonic inlet with inward deflection cowl: An inviscid perspective

    by Xue-Bin Tang, Jia Cai, He-Xia Huang, Hui-Jun Tan, Yuan Qin, Ye Tian

    The inviscid interaction mechanisms between centered-compression waves and the opposite-family cowl shock in hypersonic inlets with inward-deflecting cowls are investigated using the method of characteristics (MOC) and theoretical analysis. Three distinct flow regions, i.e., centered-compression waves/cowl shock interaction zone, cowl shock/reflected waves interaction region, and the non-interaction region, can be categorized based on interaction configurations and corresponding post-shock parameter distributions, yielding three characteristic patterns of the pressure distribution: slight variation along the shock direction in the centered-compression waves/cowl shock interaction zone, near-linear ascending in the cowl shock/reflected waves interaction region, and minimal variation in the non-interacting region. Remarkably, the cowl shock shape and post-interaction parameter distributions behave independently with the scaling factor; cowl shock shape and flowfield parameters demonstrate complete spatial overlap across varying configurations upon the normalization of coordinates by the characteristic length dC in polar systems. A derivation establishes theoretical solutions for predicting the cowl shock shape under various wave interaction configurations. Comparative validation demonstrates excellent agreement between the theoretical and MOC results, with all discrepancies remaining within 1%. This work establishes a theoretical inviscid model for analyzing shock/compression wave interactions in hypersonic inlets, offering critical insights for aerodynamic design optimization.


  • On the interaction between planar incident shock with finite width and cylindrical boundary layer at Mach 2.0

    by Fangbo Li, Hexia Huang, Huijun Tan, Xin Li, Hang Yu, Yuan Qin

    The interaction between planar incident shocks and cylindrical boundary layers is prevalent in missiles equipped with inverted inlets, which typically leads to substantial three-dimensional flow separation and the formation of vortical flow. This study utilizes wind-tunnel experiments and theoretical analysis to elucidate the shock structure, surface topology and pressure distributions induced by a planar shock with finite width impinging on a cylinder wall at Mach 2.0. In the central region, a refraction phenomenon occurs as the transmitted shock bends within the boundary layer, generating a series of compression waves that coalesce into a shock, forming a ‘shock triangle’ structure. As the incident shock propagates backward along both sides, it gradually evolves into a Mach stem, where the transmitted shock refracts the expansion wave. The incident shock interacts with the boundary layer, resulting in the formation of a highly swept separation region that yields a pair of counter-rotating horseshoe-like vortices above the separation lines. These vortices facilitate the accumulation of low-energy fluid on both sides. Although the interaction of the symmetry plane aligns with free-interaction-theory, the separation shock angle away from the centre significantly deviates from the predicted value owing to the accumulation of low-energy fluids. The primary separation line and pressure distribution jointly exhibit an elliptical similarity on the cylindrical surface. Furthermore, the potential unsteady behaviour is assessed, and the Strouhal number of the low-frequency oscillation is found to be 0.0094, which is insufficient to trigger significant alterations in the flow field structure.


  • On the double-sided shock diffractions in quiescent and supersonic crossflows

    by Yuan Qin, He-Xia Huang, Xue-Bin Tang, Hui-Jun Tan, Fang-Bo Li

    Shock diffraction is a widespread phenomenon in aerospace applications, such as shock tunnel nozzle and jet exciter exit, impacting their performance significantly. This paper focuses on the transient evolution of double-sided shock diffraction in both quiescent and supersonic crossflows by unsteady numerical simulations. The characteristics of the shock wave and the vortex are revealed. In the quiescent flow, the double-sided shock diffraction exhibits remarkable symmetry. The diffracted shock retains a self-similar nature, but its intensity distribution displays non-uniform characteristics, which gradually weakens from the center to both sides. The vortices on both sides also exhibit symmetrical behavior, with their trajectory behaving in linear tendency. When the supersonic crossflow interacts with the diffracted shock, an upward-moving separation shock and an asymmetric diffracted shock are generated. The vortices remain confined beneath the boundary layer and exhibit different shapes. Moreover, due to the rapid motion of the separation shock, the relative Mach number is introduced into the free-interaction theory (FIT) to predict the shock angle of the separation shock. The F(x¯) values corresponding to the separation point and pressure plateau are determined to be 3.04 and 4.68, respectively. The results evaluated by modified FIT show a good agreement with the values of simulation and experiment.