NSN. A. Slobodchikova

N. A. Slobodchikova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


N. A. Slobodchikova has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Прогнозирование свойств грунтовых композитов на основе портландцемента

    by Дмитрий Михайлович Рябых, Игорь Вадимович Недосеко, Сергей Васильевич Клюев, Надежда Анатольевна Слободчикова

    При оценке качественных характеристик дорожно-строительных материалов широко используются различные модели и методы прогнозирования их свойств. В прогнозировании свойств материалов важную роль играют эмпирические зависимости различных качественных характеристик. В работе поставлена цель – выявить эмпирические зависимости морозостойкости от прочности, плотности и водостойкости модифицированных грунтовых композитов на основе портландцемента. По результатам выполненных исследований выявлены эмпирические зависимости прочности на сжатие после 25 циклов замораживания-оттаивания от прочности на сжатие и плотности и прочности на сжатие после 25 циклов замораживания-оттаивания от водостойкости в проектном возрасте и плотности. Построены уравнения регрессии и установлено, что прогнозирование работы модифицированных грунтовых композитов на основе портландцемента в различных сооружениях при воздействии замерзания и оттаивания должно осуществляться в первую очередь с учётом значений плотности и прочности на сжатие. Various models and methods for predicting their properties are widely used in assessing the qualitative characteristics of road construction materials. Empirical dependences of various qualitative characteristics play an important role in predicting the properties of materials. The aim of the work is to identify empirical dependences of frost resistance on the strength, density and water resistance of modified soil composites based on portland cement. Based on the results of the performed studies, empirical dependences of compressive strength after 25 freeze-thaw cycles on compressive strength and density and compressive strength after 25 freeze-thaw cycles on water resistance at the design age and density were revealed. Regression equations are constructed and it is established that forecasting the operation of modified soil composites based on Portland cement in various structures under the influence of freezing and thawing should be carried out primarily taking into account the values of density and compressive strength.

  • Open Access

    Tube-concrete systems at the stages of the life cycle of high-rise and infrastructural facilities

    by P. A. Ermilov, T. L. Dmitrieva, N. A. Slobodchikova, V. V. Molodin

    The key features of the production and application of pipe-concrete structures as one of the most promising areas of modern construction are considered. Based on the generalization of domestic practice, as well as the experience of foreign application of such structures in the construction of large span bridges and high-rise buildings, the essence of pipe concrete is revealed, its constructive advantages in comparison with traditional reinforced concrete and metal solutions are described, which include increased load-bearing capacity, improved compression performance, high fire resistance and reduced material consumption. It is noted that the growing interest in tube-concrete elements is related to the need to increase the load-bearing capacity, technological efficiency and sustainability of construction facilities, especially in high-rise and infrastructure construction. The paper also analyzes the current regulatory framework, including Russian and international standards governing the design and operation of pipe-concrete structures. The lack of elaboration of these issues is emphasized, and the directions of their actualization are shown. As a result of the analysis, it was concluded that there is significant potential in the field of further implementation of pipe-concrete systems in construction practice. The prospects of this area are shown, such as the improvement of manufacturing technologies, the creation of a single specialized regulatory document fully covering the specifics of the calculation and design of pipe-concrete elements, the introduction of automated design methods based on numerical calculations. One of the key studies in this field is also the analysis of the impact of seismic effects on pipe-concrete structures.

  • Open Access

    Evaluation of the effectiveness of composite reinforcement of reinforced concrete structures in managing the life cycle of construction facilities

    by B. I. Pinus, N. A. Totskiy, A. M. Dilbaryan, N. A. Slobodchikova

    Life cycle management of construction facilities at the operational stage requires a reasonable choice of organizational and technical solutions aimed at restoring operational reliability of structures, extending their service life and rational use of resources. The purpose of the study is to evaluate the effectiveness of composite reinforcement of reinforced concrete structures as a tool for managing the technical condition of construction facilities. The study was performed by comparative testing of concrete base samples of class B25 without reinforcement and with external reinforcement with carbon fiber alloy SikaWrap® 530 C(VP), fixed with epoxy compound Sikadur®-300. The effectiveness of reinforcement was assessed according to a set of criteria: maximum and destructive loads, limiting deformations, duration of fracture resistance and energy parameters of deformation. It has been found that carbon fiber reinforcement increases the maximum bearing capacity of the elements by 2.7 times, the maximum deformations by about 3 times, the duration of fracture resistance by 6.35 times, and the energy parameters of internal resistance by about 7 times. The results obtained confirm the possibility of using external carbon fiber reinforcement in the development of solutions for the repair, restoration and modernization of reinforced concrete structures. The experimental data can be used to assess the effectiveness, quality, and reliability of reinforcement options, as well as to support organizational and technical decision-making when forming programs for the operation, overhaul, and life cycle extension of construction facilities.

  • Open Access

    Application of municipal solid waste in road construction

    by N. A. Slobodchikova, S. V. Klyuev, A. M. Ismailov

    Each year, a large amount of solid municipal waste is generated globally. Most of this waste is brought to disposal sites, which takes land resources out of circulation, pollutes soils, groundwater, and atmospheric air, and has a negative impact on flora and fauna. Therefore, recycling of consumer waste becomes one of the most urgent issues of environmental protection and resource conservation. Road construction is a promising area of reuse of solid municipal waste. Glass and plastic waste make up about 17% of all waste generated in Russia. Meanwhile, glass and plastic waste are suitable for the production of materials with high physical and mechanical characteristics. In road construction, glass waste can be used as a filler in asphalt concrete mixtures, as a component of concrete mixtures, as a reinforcement and stabilization material for clay soils, as well as in the production of paints. Plastic waste can be used in asphalt concrete and concrete mixtures, for soil stabilization. Among the key issues preventing their effective and large-scale use are the lack of an effective system of separate collection and sorting, the absence of large-scale studies on the use of waste in different road climatic zones, as well as the need for studies to assess the potential environmental hazards of its use in road construction.

  • Application of ash and slag waste from coal combustion in the construction of the earth bed of roads

    by S.V. Klyuev, N.A. Slobodchikova, M.S. Saidumov, A.S. Abumuslimov, D.A. Mezhidov, T.A. Khezhev

    More than 1.5 billion tonnes of ash and slag waste from thermal power plants have been accumulated in the RF. The most promising direction of reuse is construction and repair of roads. The most material-intensive direction is the construction of earth bed. The aim of the study is to expand the practice of using ash and slag mixtures from thermal power plants for the construction of roadbeds in continental and polar climate. In order to achieve the goal set in the work the ash and slag mixture from different ash dumps of Irkutsk region was sampled. Ash and slag wastes can be considered as technogenic soils and classified according to GOST 25100 as gravelly sands and dusty sands. Ash and slag mixtures do not possess cohesion, have low values of internal friction angle, high porosity of particles and low specific weight, and small frost heave deformation. To evaluate the efficiency of ash and slag mixtures application in the structures of the roadbed of roads the design and construction of the roadway and the roadbed on the section of the road in the Irkutsk region was carried out. The technology of works on construction of earth bed layers from ash and slag mixtures is similar to the technology of erection of layers from soils. The constructed construction of road with earth bed from ash and slag mixtures has operational characteristics not lower than the construction of the adjacent road section with earth bed from local soils. Ash and slag mixtures can be used for construction of earth bed layers practically without restrictions.


  • Open Access

    Dependence of the soils’ elastic modulus reinforced with inorganic binders on compressive strength

    by N. A. Slobodchikova, S. V. Klyuev, K. V. Plyuta

       Introduction. The modulus of elasticity refers to one of the main physical and mechanical characteristics of reinforced local grounds. Deformations of soils and building materials are usually described by Hooke’s law. The main laboratory testing methods include applying of uniaxial compression, triaxial compression, rigid stamp technics. Determining the modulus of elasticity is a complex, time-consuming and labor-intensive test. There are empirical models that describe the relationship between the modulus of elasticity and various parameters and characteristics (compressive strength, binder content in the mixture, etc.). However, these models are mainly developed for stabilized soils and for crushed stone reinforced with Portland cement.   Methods and materials. To determine the pattern of change in the modulus of soils’ elasticity reinforced with inorganic binding materials from compressive strength, studies were conducted on samples of various soils strengthened with Portland cement and lime. Existing methods specified in the regulatory and technical documentation were used to produce the samples.   Results. Based on the performed research, two empirical models were developed that reflect the dependence of the elastic modulus values on the compressive strength values of soils reinforced with Portland cement and lime.   Discussion and conclusions. Existing testing methods of the elastic modulus are lengthy and labor-intensive. The developed empirical models allow us to obtain approximate values of the elastic modulus from the values of compressive strength of soil samples reinforced with Portland cement and lime.


  • Open Access

    Study of the properties of ash-slag mixtures from thermal power plants in the context of their application in road construction

    by Nadezhda Slobodchikova, Ksenia Plyuta, Sergey Klyuev

    The existing network of regional and local roads is characterized by a relatively low transport and operational condition. Given the extensive length of the road network, the application of effective and economical technologies is necessary to bring these roads to standardized condition. Such technologies should involve the use of technogenic waste, particularly ash-slag waste from thermal power plants. Despite numerous studies, the potential for large-scale application of ash-slag waste in road construction under continental and polar climate conditions has been insufficiently explored. The number of road infrastructure projects constructed using these materials in the Russian Federation is minimal. Therefore, this study aims to investigate the feasibility of large-scale application of ash-slag mixtures in road construction. The research examines the chemical and physicomechanical characteristics of various ash-slag mixtures from the Irkutsk region. It has been established that, within the scope of this research regarding the use of ash-slag mixtures in road construction, the construction and technical properties of these mixtures are approximately uniform across ash-disposal areas. The most promising applications for ash-slag mixtures in road construction include their use in embankments as both cement-stabilized and unstabilized technogenic soils; in road surfaces as cement-stabilized technogenic soils for the construction of base layers; and as components of ash-soil and ash-mineral compositions combined with gravel, sand, and local soils.


  • Open Access

    Forecast of temporal variations in some road condition variables

    by N. A. Slobodchikova

    The article considers issues of forecasting temporal variations in the condition of roads. The road condition is affected by external factors against the background of internal processes, occurring in construction layers. Most mathematical models, forecasting the service life of roads, are developed on the basis of strength characteristics, which, in conditions of limited financing of regional and local significance roads, leads to certain difficulties in their practical application. Therefore, it is necessary to develop a model of variations in the condition of road pavements based on data about their consumer properties, such as evenness, adhesion coefficient and pavement condition. The process of reducing the evenness values, pavement condition, and adhesion coefficient over time can be described using the Weibull distribution. The paper presents mathematical models of temporal variations in the condition of the road pavement, adhesion coefficient and longitudinal evenness. The data of the model and annual road diagnostics, compared for assessing the model effectiveness, demonstrated high convergence. The proposed approach to assessing the variations in the pavement condition, evenness and adhesion coefficient makes it possible to increase the efficiency of managing the road condition.