Hoda Yassin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hoda Yassin has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Arash Akhoundi
Department of Microelectronics, Delft University of Technology, Delft, CD, The Netherlands
2 shared publications - Dante Gabriel Muratore
Delft University of Technology
2 shared publications A. El-Sabbe
Department of Electrical Engineering, Faculty of Engineering, Shebin El-Kom Minoufiya University, Egypt
1 shared publication- Ahmed Shawky
Department of Electrical Engineering, Faculty of Engineering, Aswan University, Aswan, Egypt
1 shared publication Beatriz Lafuente Alcazar
Department of Microelectronics, Delft University of Technology, Delft, CD, The Netherlands
1 shared publication- Eduard Alarcón
Universitat Politecnica de Catalunya, Barcelona, Spain
1 shared publication
Latest Publications
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (4) , 1538-1550
A Bidirectional Neuromodulation Chipset With Algorithm-Aware AFE Optimization and High-Voltage-Compliant Stimulation
This work presents a bidirectional neuromodulation chipset with 64-channel neural analog front-end (AFE), and a four-channel current stimulator. The chipset employs a heterogeneous architecture, combining a 28-nm low-voltage (LV) CMOS process for the AFE and the digital backend (DBE) to improve area and power efficiency, with a 180-nm high-voltage (HV) bipolar-CMOS-DMOS (BCD) process for the stimulation driver to achieve HV compliance. An AFE–DBE co-design framework is proposed to relax AFE noise requirements without sacrificing classification performance in the DBE, thus enabling significant reductions in AFE’s area and power consumption. In addition, we introduce a novel embedded current-steering digital-to-analog converter (IDAC) structure that addresses key limitations of conventional IDACs in multichannel direct-digitization recording architectures, including noise degradation from IDAC switching, and channel-to-channel gain variations. Overall, the proposed chipset achieves HV compliance (10 V) in the stimulator, while maintaining exceptional area and power efficiency in the AFE and DBE. Notably, the AFE achieves the smallest per-channel area (0.0009 mm2) and the lowest per-channel power (204 nW) reported to date for electrocorticography (ECoG) acquisition ( ${\leq }1$ kHz bandwidth). Together, these results highlight the chipset’s potential for implantable neuromodulation systems that enable long-term monitoring of neurological disorders with closed-loop intervention.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (4) , 1538-1550
A Bidirectional Neuromodulation Chipset With Algorithm-Aware AFE Optimization and High-Voltage-Compliant Stimulation
This work presents a bidirectional neuromodulation chipset with 64-channel neural analog front-end (AFE), and a four-channel current stimulator. The chipset employs a heterogeneous architecture, combining a 28-nm low-voltage (LV) CMOS process for the AFE and the digital backend (DBE) to improve area and power efficiency, with a 180-nm high-voltage (HV) bipolar-CMOS-DMOS (BCD) process for the stimulation driver to achieve HV compliance. An AFE–DBE co-design framework is proposed to relax AFE noise requirements without sacrificing classification performance in the DBE, thus enabling significant reductions in AFE’s area and power consumption. In addition, we introduce a novel embedded current-steering digital-to-analog converter (IDAC) structure that addresses key limitations of conventional IDACs in multichannel direct-digitization recording architectures, including noise degradation from IDAC switching, and channel-to-channel gain variations. Overall, the proposed chipset achieves HV compliance (10 V) in the stimulator, while maintaining exceptional area and power efficiency in the AFE and DBE. Notably, the AFE achieves the smallest per-channel area (0.0009 mm2) and the lowest per-channel power (204 nW) reported to date for electrocorticography (ECoG) acquisition ( ${\leq }1$ kHz bandwidth). Together, these results highlight the chipset’s potential for implantable neuromodulation systems that enable long-term monitoring of neurological disorders with closed-loop intervention.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (6) , 3176-3180
A Power-Efficient Oscillatory Synchronization Feature Extractor for Closed-Loop Neuromodulation
This brief presents a low-power oscillatory synchronization feature extraction (FE) unit for phase-amplitude coupling (PAC) and phase locking value (PLV) features. The proposed FE unit uses a new multiplier-less wavelet approximation in combination with a multi-rate lowpass filter bank for low-power complex signal extraction. Further power and area reductions are obtained by utilizing a light sine and cosine extractor (LSCE) for the feature computation. The synthesized 32-channel design achieves state-of-the-art performances in post-layout simulations at 430 nW/channel and 0.36 mm while maintaining sufficient accuracy for seizure detection in epileptic patients.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (6) , 3176-3180
A Power-Efficient Oscillatory Synchronization Feature Extractor for Closed-Loop Neuromodulation
This brief presents a low-power oscillatory synchronization feature extraction (FE) unit for phase-amplitude coupling (PAC) and phase locking value (PLV) features. The proposed FE unit uses a new multiplier-less wavelet approximation in combination with a multi-rate lowpass filter bank for low-power complex signal extraction. Further power and area reductions are obtained by utilizing a light sine and cosine extractor (LSCE) for the feature computation. The synthesized 32-channel design achieves state-of-the-art performances in post-layout simulations at 430 nW/channel and 0.36 mm while maintaining sufficient accuracy for seizure detection in epileptic patients.
- 19 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Proposal of Compact Active and Reactive Power Processing Circuit for RI-WPT Receivers
Wireless Power Transfer (WPT) concept has been realized through many technological methods to feed power in a cordless way in many applications. Among these various methods, Resonant Inductive Wireless Power Transfer RI-WPT has been extensively used to charge the batteries for consumer electronics such as smartwatches, mobile phones, and laptops. However, at high resonant frequency, this technology is vulnerable to the frequency variation in transmitter and receiver circuits, which results from components tolerance and other related factors. Frequency mismatch severely drops the conversion power efficiency and deteriorates the effectiveness of RI-WPT. To solve this issue, this paper proposes and verifies a novel active and reactive power control circuit at the receiver side of a wireless power transfer system. A 10W 127.7 kHz RIWPT receiver system is designed and verified against variations in compensation network elements, where 1. 3W is recovered after frequency re-tuning thanks to the proposed circuit.
- 19 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Proposal of Compact Active and Reactive Power Processing Circuit for RI-WPT Receivers
Wireless Power Transfer (WPT) concept has been realized through many technological methods to feed power in a cordless way in many applications. Among these various methods, Resonant Inductive Wireless Power Transfer RI-WPT has been extensively used to charge the batteries for consumer electronics such as smartwatches, mobile phones, and laptops. However, at high resonant frequency, this technology is vulnerable to the frequency variation in transmitter and receiver circuits, which results from components tolerance and other related factors. Frequency mismatch severely drops the conversion power efficiency and deteriorates the effectiveness of RI-WPT. To solve this issue, this paper proposes and verifies a novel active and reactive power control circuit at the receiver side of a wireless power transfer system. A 10W 127.7 kHz RIWPT receiver system is designed and verified against variations in compensation network elements, where 1. 3W is recovered after frequency re-tuning thanks to the proposed circuit.
- Open Access
- 1 April 2005
- Published by Egyptian Knowledge Bank in ERJ. Engineering Research Journal
- Vol. 28 (2) , 159-167
STABILITY ANALYSIS OF A SINGLE-PHASE VOLTAGE SOURCE INVERTER
This paper presents the analysis of a single-phase voltage soufce inverter with a second order filter. The differential equations describing the system behavior in the different modes of operation are given. A general state space model of the voltage source inverter is first derived. A linearized small signal dynamic model is then developed &om the system general model using perturbation and small signal approximation. Root locus analysis presents the study of the system parameters, which affect the system stability. A feedback output voltage control loop is inserted into the system with proportional-integral (PI) controller. Liapunov stability method is performed to determine the condition of the modulation index for stability. The simulation results are given and proved to yield good agreement when compared with the experimental results.
- 1 April 2005
- Published by Egyptian Knowledge Bank in ERJ. Engineering Research Journal
- Vol. 28 (2) , 159-167
Open AccessSTABILITY ANALYSIS OF A SINGLE-PHASE VOLTAGE SOURCE INVERTER
This paper presents the analysis of a single-phase voltage soufce inverter with a second order filter. The differential equations describing the system behavior in the different modes of operation are given. A general state space model of the voltage source inverter is first derived. A linearized small signal dynamic model is then developed &om the system general model using perturbation and small signal approximation. Root locus analysis presents the study of the system parameters, which affect the system stability. A feedback output voltage control loop is inserted into the system with proportional-integral (PI) controller. Liapunov stability method is performed to determine the condition of the modulation index for stability. The simulation results are given and proved to yield good agreement when compared with the experimental results.