Bernhard Rüger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bernhard Rüger has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Dino Bakula
Stoik & Partner ZT-GmbH, Fendigasse 8, A-1050 Vienna, Austria
2 shared publications - Jakob Willam
Research Unit of Track-Bound Transportation Systems, Institute of Transportation, TU Wien, 1040 Vienna, Austria
2 shared publications - Marcel Weber
Research Unit of Track-bound Transportation Systems, Institute of Transportation, TU Wien, Karlsplatz 13/230-02, A-1040 Vienna, Austria
2 shared publications - Niklas Schnitzer
Research Unit of Track-Bound Transportation Systems, Institute of Transportation, TU Wien, 1040 Vienna, Austria
2 shared publications - Takeru Shibayama
TU Wien
2 shared publications - Thomas Eigner
Rail Technology and Mobility Department, University of Applied Sciences St. Pölten, Campus-Platz 1, 3100 St. Pölten, Austria
2 shared publications
Latest Publications
- Open Access
- 16 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (22) , 11669
Family Travel by Train: Needs and Barriers Along the Travel Chain
Families with children are among the travel groups with the lowest share of rail travel for holiday trips, although rail has the lowest greenhouse gas emissions of any motorised mode and can be cheaper than flying for families with luggage. This paper examines where along the travel chain—from planning to mobility at the holiday destination—barriers arise for families with children aged up to 14. The empirical basis combines passenger surveys and observations from three research projects conducted on Austrian long-distance trains and in one Austrian winter-sport region, with a family focus group, expert interviews and a review of family services at eight European rail companies. The reported barriers accumulate along the travel chain: luggage and children’s equipment emerge as a cross-cutting issue; booking platforms do not adequately cater to needs such as spaces for pushchairs or family compartments; and on-board family facilities vary greatly across Europe, with no binding minimum standards. Three comparatively low-effort measures are derived: family-specific filters and information in booking systems, clearer communication of rail’s cost advantages, and feeder and luggage services bookable with the ticket; Europe-wide minimum standards are proposed as a long-term measure. As the evidence is descriptive and not representative of all families, these measures are hypotheses to be evaluated.
- 16 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (22) , 11669
Open AccessFamily Travel by Train: Needs and Barriers Along the Travel Chain
Families with children are among the travel groups with the lowest share of rail travel for holiday trips, although rail has the lowest greenhouse gas emissions of any motorised mode and can be cheaper than flying for families with luggage. This paper examines where along the travel chain—from planning to mobility at the holiday destination—barriers arise for families with children aged up to 14. The empirical basis combines passenger surveys and observations from three research projects conducted on Austrian long-distance trains and in one Austrian winter-sport region, with a family focus group, expert interviews and a review of family services at eight European rail companies. The reported barriers accumulate along the travel chain: luggage and children’s equipment emerge as a cross-cutting issue; booking platforms do not adequately cater to needs such as spaces for pushchairs or family compartments; and on-board family facilities vary greatly across Europe, with no binding minimum standards. Three comparatively low-effort measures are derived: family-specific filters and information in booking systems, clearer communication of rail’s cost advantages, and feeder and luggage services bookable with the ticket; Europe-wide minimum standards are proposed as a long-term measure. As the evidence is descriptive and not representative of all families, these measures are hypotheses to be evaluated.
- Open Access
- 5 November 2026
- Published by MDPI AG in Future Transportation
- Vol. 6 (6) , 256
Correction: Bakula et al. User Priorities for Station Facilities and Related Attributes at Regional Rail Stations in Rural Peripheral Areas: A Seasonal Comparison from Austria. Future Transp. 2026, 6, 192
- 5 November 2026
- Published by MDPI AG in Future Transportation
- Vol. 6 (6) , 256
Open AccessCorrection: Bakula et al. User Priorities for Station Facilities and Related Attributes at Regional Rail Stations in Rural Peripheral Areas: A Seasonal Comparison from Austria. Future Transp. 2026, 6, 192
- Open Access
- 4 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (21) , 11257
Transfer Resistance in Long-Distance Rail: Evidence from an On-Board Passenger Survey and Operational Data
Transfer behaviour is a key determinant of the attractiveness of public transport, yet it has been quantified less thoroughly than the elasticities of journey time and fare—particularly in long-distance travel, where the competitiveness of rail determines its potential for modal shift and thus for reducing emissions. This study quantifies transfer resistance in long-distance rail using an on-board survey conducted in 2016 on three major Austrian routes (1009 questionnaires distributed, 903 valid), supplemented by sales data from a long-distance rail operator and an analysis of five tram lines linked into direct, transfer-free through services. Around 53% of respondents travelled without transferring, around 97% transferred no more than twice, and fewer than 2% transferred three times; the decline follows a multiplicative pattern. Among direct travellers, the stated cumulative willingness to accept additional transfers falls from around 44% for one to 4% for two additional transfers; around 51% of all respondents would look for an alternative at two or fewer additional transfers. An additional transfer requires, on average, a journey time saving of around 17% or a fare reduction of around 30%; as journey duration increases, the relative requirement falls from 33% to 10%, while the directly stated absolute requirement rises from around 12 to 37 min. Travel context (journey duration, purpose, frequency, luggage) is associated with transfer behaviour, whereas no association with age, gender or occupation was detectable. Transfers should therefore be modelled as a distinct, non-linear and context-segmented barrier.
- 4 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (21) , 11257
Open AccessTransfer Resistance in Long-Distance Rail: Evidence from an On-Board Passenger Survey and Operational Data
Transfer behaviour is a key determinant of the attractiveness of public transport, yet it has been quantified less thoroughly than the elasticities of journey time and fare—particularly in long-distance travel, where the competitiveness of rail determines its potential for modal shift and thus for reducing emissions. This study quantifies transfer resistance in long-distance rail using an on-board survey conducted in 2016 on three major Austrian routes (1009 questionnaires distributed, 903 valid), supplemented by sales data from a long-distance rail operator and an analysis of five tram lines linked into direct, transfer-free through services. Around 53% of respondents travelled without transferring, around 97% transferred no more than twice, and fewer than 2% transferred three times; the decline follows a multiplicative pattern. Among direct travellers, the stated cumulative willingness to accept additional transfers falls from around 44% for one to 4% for two additional transfers; around 51% of all respondents would look for an alternative at two or fewer additional transfers. An additional transfer requires, on average, a journey time saving of around 17% or a fare reduction of around 30%; as journey duration increases, the relative requirement falls from 33% to 10%, while the directly stated absolute requirement rises from around 12 to 37 min. Travel context (journey duration, purpose, frequency, luggage) is associated with transfer behaviour, whereas no association with age, gender or occupation was detectable. Transfers should therefore be modelled as a distinct, non-linear and context-segmented barrier.
- Open Access
Real Standing Capacity of Public Transport Vehicles: Area-Differentiated Passenger Densities at the Behavioural Capacity Limit—The Case of Vienna
The standing capacity of public transport vehicles is usually derived from flat area assumptions of four to 6.7 passengers per square metre (P/m2) or from structural load assumptions, while empirical values from regular service are lacking. This study determines real standing densities from 227 structured observations of stopping events in the Vienna metro, tram, bus and suburban rail network; in 126 of these, waiting passengers were left behind although space was still geometrically available (limit capacity). Densities were recorded separately for the door, aisle and transition areas of nine vehicle types and compared with field experiments with test persons. At limit capacity, mean densities were 3.19 P/m2 (door area), 2.37 P/m2 (aisle area) and 2.30 P/m2 (transition area), differing systematically with the accessibility of the areas. Service disruptions raised the door area densities to about 3.3 P/m2 and major events to around 4 P/m2; the experimental maximum occupancy reached 4.0 to 4.4 P/m2 without luggage and up to 40% less with luggage. Regulatory and manufacturer values were practically never reached in Vienna. Capacity figures for procurement, service planning and simulation should therefore use area-differentiated, empirically calibrated densities—about 3 P/m2 in door areas and 2.3 P/m2 in aisle and transition areas—instead of a single flat value.
Open AccessReal Standing Capacity of Public Transport Vehicles: Area-Differentiated Passenger Densities at the Behavioural Capacity Limit—The Case of Vienna
The standing capacity of public transport vehicles is usually derived from flat area assumptions of four to 6.7 passengers per square metre (P/m2) or from structural load assumptions, while empirical values from regular service are lacking. This study determines real standing densities from 227 structured observations of stopping events in the Vienna metro, tram, bus and suburban rail network; in 126 of these, waiting passengers were left behind although space was still geometrically available (limit capacity). Densities were recorded separately for the door, aisle and transition areas of nine vehicle types and compared with field experiments with test persons. At limit capacity, mean densities were 3.19 P/m2 (door area), 2.37 P/m2 (aisle area) and 2.30 P/m2 (transition area), differing systematically with the accessibility of the areas. Service disruptions raised the door area densities to about 3.3 P/m2 and major events to around 4 P/m2; the experimental maximum occupancy reached 4.0 to 4.4 P/m2 without luggage and up to 40% less with luggage. Regulatory and manufacturer values were practically never reached in Vienna. Capacity figures for procurement, service planning and simulation should therefore use area-differentiated, empirically calibrated densities—about 3 P/m2 in door areas and 2.3 P/m2 in aisle and transition areas—instead of a single flat value.
- Open Access
- 31 October 2026
- Published by Springer Nature
- p. 1026-1034
Technological-Operational Framework for Future Metros: Focus on the Impact of Automation on the Metro System
In this paper, we examined the impact of automation on the metro system. To increase capacity and lower costs, automated metros became a goal for public transport. This fact led us to investigate the impacts on the passenger and operator spheres. To better understand the framework of future metros, we gathered passengers’ preferences and the operators’ goals for their systems through surveys and interviews. This data built the foundation for our analysis. With the support of the Innovation-Automation-Strategy (IAS) cycle and the cycle of transit system planning, we developed the Automation-to-Impact (A2I) cycle. With this A2I cycle, it was possible to investigate the impacts of integrating Grade of Automation 4 (GoA4) and Platform Screen Doors (PSD) on the planning strategy for metro operators as well as on the passengers’ travel experience. It can be shown that these two measures have a positive effect on the two examined spheres. As this framework builds a cycle, the impacts indicate further innovation and automation, and the need for further research. The A2I cycle provides guidance for future innovation by encouraging comprehensive forward thinking.
- 31 October 2026
- Published by Springer Nature
- p. 1026-1034
Open AccessTechnological-Operational Framework for Future Metros: Focus on the Impact of Automation on the Metro System
In this paper, we examined the impact of automation on the metro system. To increase capacity and lower costs, automated metros became a goal for public transport. This fact led us to investigate the impacts on the passenger and operator spheres. To better understand the framework of future metros, we gathered passengers’ preferences and the operators’ goals for their systems through surveys and interviews. This data built the foundation for our analysis. With the support of the Innovation-Automation-Strategy (IAS) cycle and the cycle of transit system planning, we developed the Automation-to-Impact (A2I) cycle. With this A2I cycle, it was possible to investigate the impacts of integrating Grade of Automation 4 (GoA4) and Platform Screen Doors (PSD) on the planning strategy for metro operators as well as on the passengers’ travel experience. It can be shown that these two measures have a positive effect on the two examined spheres. As this framework builds a cycle, the impacts indicate further innovation and automation, and the need for further research. The A2I cycle provides guidance for future innovation by encouraging comprehensive forward thinking.
- Open Access
- 29 October 2026
- Published by Springer Nature
- p. 701-709
Passenger Requirements and Behaviour in Metro Systems
This study examines passenger requirements and behaviour in metro systems, with a particular focus on automation and real-time information. It examines passenger concerns regarding automated metros and identifies communication strategies to address these concerns. The research also analyses waiting preferences on the platform and the extent to which real-time information supports more balanced passenger distribution. Furthermore, it examines perceptions of safety within the system and seating and standing preferences inside the vehicle. A structured passenger survey (n = 899) conducted across Europe forms the primary basis of the analysis. Interviews with representatives from railway operators and researchers were also conducted to support and contextualize the survey findings. The results indicate a high demand for clear, dynamic, and context-sensitive real-time passenger information, particularly regarding crowding levels and service disruptions. While automation is widely accepted, concerns remain about safety and the lack of human presence in emergencies. Many respondents expressed a willingness to adapt their behaviour on the platform if clearer guidance or real-time updates were provided. In terms of seating and standing preferences inside the vehicle, passengers prefer a design that allows easy boarding and alighting, while ensuring maximum personal space.
- 29 October 2026
- Published by Springer Nature
- p. 701-709
Open AccessPassenger Requirements and Behaviour in Metro Systems
This study examines passenger requirements and behaviour in metro systems, with a particular focus on automation and real-time information. It examines passenger concerns regarding automated metros and identifies communication strategies to address these concerns. The research also analyses waiting preferences on the platform and the extent to which real-time information supports more balanced passenger distribution. Furthermore, it examines perceptions of safety within the system and seating and standing preferences inside the vehicle. A structured passenger survey (n = 899) conducted across Europe forms the primary basis of the analysis. Interviews with representatives from railway operators and researchers were also conducted to support and contextualize the survey findings. The results indicate a high demand for clear, dynamic, and context-sensitive real-time passenger information, particularly regarding crowding levels and service disruptions. While automation is widely accepted, concerns remain about safety and the lack of human presence in emergencies. Many respondents expressed a willingness to adapt their behaviour on the platform if clearer guidance or real-time updates were provided. In terms of seating and standing preferences inside the vehicle, passengers prefer a design that allows easy boarding and alighting, while ensuring maximum personal space.
- Open Access
- 10 October 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (20) , 10303
Designing Future Night Trains in Europe: Passenger Experience as a Basis for Vehicle Design Requirements
Overnight rail is attracting renewed interest across Europe as a sustainable alternative to short- and medium-haul aviation, yet empirical evidence on passengers’ requirements for vehicle design remains scarce. This study addresses them using one of the largest recent surveys of European overnight rail passengers. A cross-sectional online survey ran from August 2024 to March 2025 on night trains in Austria, Germany and Switzerland. Of 1856 completed questionnaires, 1274 from current or recent night train passengers were analysed using descriptive statistics, χ2 and Fisher’s exact tests with Bonferroni correction, a permutation χ2-test and an ordinal logistic regression of sleep quality. Environmental considerations were the most frequent motivation (82.02%), followed by avoiding daytime travel (63.43%) and stress-free travelling (56.26%). Passengers used the journey for everyday activities, notably eating and drinking (77.16%) and resting (74.57%), and 85.81% of luggage was stored inside the compartment. Sleep was rated good or very good by 35.13% and poor or very poor by 19.08%; seated accommodation scored significantly lower than sleepers (OR = 0.34, 95% CI [0.13–0.89], p = 0.004). Passengers evaluate overnight rail not as mere transport but as a temporary living environment; future vehicles should therefore be designed around passengers’ functional needs throughout the journey rather than individual components.
- 10 October 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (20) , 10303
Open AccessDesigning Future Night Trains in Europe: Passenger Experience as a Basis for Vehicle Design Requirements
Overnight rail is attracting renewed interest across Europe as a sustainable alternative to short- and medium-haul aviation, yet empirical evidence on passengers’ requirements for vehicle design remains scarce. This study addresses them using one of the largest recent surveys of European overnight rail passengers. A cross-sectional online survey ran from August 2024 to March 2025 on night trains in Austria, Germany and Switzerland. Of 1856 completed questionnaires, 1274 from current or recent night train passengers were analysed using descriptive statistics, χ2 and Fisher’s exact tests with Bonferroni correction, a permutation χ2-test and an ordinal logistic regression of sleep quality. Environmental considerations were the most frequent motivation (82.02%), followed by avoiding daytime travel (63.43%) and stress-free travelling (56.26%). Passengers used the journey for everyday activities, notably eating and drinking (77.16%) and resting (74.57%), and 85.81% of luggage was stored inside the compartment. Sleep was rated good or very good by 35.13% and poor or very poor by 19.08%; seated accommodation scored significantly lower than sleepers (OR = 0.34, 95% CI [0.13–0.89], p = 0.004). Passengers evaluate overnight rail not as mere transport but as a temporary living environment; future vehicles should therefore be designed around passengers’ functional needs throughout the journey rather than individual components.
- Open Access
- 5 October 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (19) , 9864
The Impact of Running Gear Design and Its Position Within the Car Body on Comfort and Suitability as a Night Train—Part 2
The renaissance of night trains and the growing interest in high-speed night services raise the question of which vehicle concepts offer the acoustic conditions required for restful sleep on board. This study therefore examines the interior noise of passenger trains with a view to their suitability for night-train operation, focusing on the influence of the running gear concept and of the measurement position within the car body. In-service measurements were carried out on regional, long-distance and high-speed trains equipped with conventional bogies, Jacobs bogies and single-wheel running gear, including single- and double-deck configurations. A-weighted equivalent continuous sound pressure levels were recorded above the front bogie, in the centre of the carriage and above the rear bogie, following the principles of ISO 3381 as far as ongoing commercial operation permits. Sound levels rise with increasing speed at roughly 0.5 dB per 10km/h in regional and long-distance service, with a markedly flatter increase above 250km/h. The centre of the carriage tends to be the quietest position, whereas the area above the rear bogie is generally the loudest. No systematic acoustic advantage of Jacobs bogies over conventional bogies could be demonstrated from the available measurements. As all data were recorded in regular commercial service, the levels reported here should be understood as comparative real-operation values rather than as standardised certification measurements.
- 5 October 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (19) , 9864
Open AccessThe Impact of Running Gear Design and Its Position Within the Car Body on Comfort and Suitability as a Night Train—Part 2
The renaissance of night trains and the growing interest in high-speed night services raise the question of which vehicle concepts offer the acoustic conditions required for restful sleep on board. This study therefore examines the interior noise of passenger trains with a view to their suitability for night-train operation, focusing on the influence of the running gear concept and of the measurement position within the car body. In-service measurements were carried out on regional, long-distance and high-speed trains equipped with conventional bogies, Jacobs bogies and single-wheel running gear, including single- and double-deck configurations. A-weighted equivalent continuous sound pressure levels were recorded above the front bogie, in the centre of the carriage and above the rear bogie, following the principles of ISO 3381 as far as ongoing commercial operation permits. Sound levels rise with increasing speed at roughly 0.5 dB per 10km/h in regional and long-distance service, with a markedly flatter increase above 250km/h. The centre of the carriage tends to be the quietest position, whereas the area above the rear bogie is generally the loudest. No systematic acoustic advantage of Jacobs bogies over conventional bogies could be demonstrated from the available measurements. As all data were recorded in regular commercial service, the levels reported here should be understood as comparative real-operation values rather than as standardised certification measurements.
- Open Access
- 3 October 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (19) , 9822
The Impact of Running Gear Design and Its Position Within the Car Body on Comfort and Suitability as a Night Train—Part 1
This study investigates how running-gear design and the measurement position within the car body affect vibration-related dynamic ride comfort relevant to night train operation. Measurements were conducted during regular passenger service on regional, long-distance and high-speed trains featuring conventional bogies, Jacobs bogies and single-wheel running gear. The analysis is deliberately limited to dynamic comfort, assessed using the mean comfort index and the discrete-event index in accordance with DIN EN 12299. The results show that ride comfort is generally highest at the center of the carriage, especially regarding discrete vibration events, which occur predominantly above bogies. In high-speed operation, the front bogie area performs similarly to the center of the carriage, while the rear bogie usually exhibits poorer comfort. Position-related differences are smaller in regional services. No significant comfort advantage was found for Jacobs bogies over conventional bogies. Single-wheel running gear showed greater sensitivity to vertical vibrations and lower overall comfort. Comfort decreases with increasing speed, although the deterioration is not always linear and may exhibit plateaus at high speeds.- 3 October 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (19) , 9822
Open AccessThe Impact of Running Gear Design and Its Position Within the Car Body on Comfort and Suitability as a Night Train—Part 1
This study investigates how running-gear design and the measurement position within the car body affect vibration-related dynamic ride comfort relevant to night train operation. Measurements were conducted during regular passenger service on regional, long-distance and high-speed trains featuring conventional bogies, Jacobs bogies and single-wheel running gear. The analysis is deliberately limited to dynamic comfort, assessed using the mean comfort index and the discrete-event index in accordance with DIN EN 12299. The results show that ride comfort is generally highest at the center of the carriage, especially regarding discrete vibration events, which occur predominantly above bogies. In high-speed operation, the front bogie area performs similarly to the center of the carriage, while the rear bogie usually exhibits poorer comfort. Position-related differences are smaller in regional services. No significant comfort advantage was found for Jacobs bogies over conventional bogies. Single-wheel running gear showed greater sensitivity to vertical vibrations and lower overall comfort. Comfort decreases with increasing speed, although the deterioration is not always linear and may exhibit plateaus at high speeds. - Open Access
- 3 October 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (19) , 10116
Analysis of Potentially Efficient, Near-Term Realisable and Future Routes for High-Speed Overnight Trains
Aviation within Europe has fully recovered from the COVID-19 disruption and continues to grow, making low-emission alternatives to short- and medium-haul flights an urgent policy concern. This study assesses whether a share of intra-European air travel could plausibly be shifted onto a high-speed night train network, and identifies which city pairs offer the greatest passenger volumes for such a shift. Origin–destination cities were combined with a routable model of the European long-distance rail network, built on OpenStreetMap and OpenRailwayMap data and solved with a Dijkstra-based shortest-path approach. Travel times were computed for the 2024 network and a 2050 scenario including planned and under-construction high-speed lines, at 200 km/h, 230 km/h and maximum permitted line speeds; flight relations falling into a 6.5–13 h rail window were then linked with Eurostat passenger volumes. The analysis identifies London, Paris, Madrid, Barcelona, Rome, Milan, Amsterdam and Vienna as consistently high-volume candidates in both scenarios, with London and Vienna examined in detail as contrasting cases. The 2050 scenario integrates planned, funded and aspirational TEN-T high-speed projects and is therefore presented as an upper-bound accessibility experiment reflecting stated political intent, rather than as a delivery forecast; the identified corridors are candidate relations for subsequent, more detailed operational feasibility work, and the reported rankings are conditional on the applied 6.5–13 h rail-window definition. The results suggest, as a hypothesis to be tested in subsequent operational studies, that high-speed night trains and daytime high-speed services may act as complementary segments of a single long-distance rail offering, whose realisable modal shift will ultimately depend on price, comfort and operational conditions not modelled here.
- 3 October 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (19) , 10116
Open AccessAnalysis of Potentially Efficient, Near-Term Realisable and Future Routes for High-Speed Overnight Trains
Aviation within Europe has fully recovered from the COVID-19 disruption and continues to grow, making low-emission alternatives to short- and medium-haul flights an urgent policy concern. This study assesses whether a share of intra-European air travel could plausibly be shifted onto a high-speed night train network, and identifies which city pairs offer the greatest passenger volumes for such a shift. Origin–destination cities were combined with a routable model of the European long-distance rail network, built on OpenStreetMap and OpenRailwayMap data and solved with a Dijkstra-based shortest-path approach. Travel times were computed for the 2024 network and a 2050 scenario including planned and under-construction high-speed lines, at 200 km/h, 230 km/h and maximum permitted line speeds; flight relations falling into a 6.5–13 h rail window were then linked with Eurostat passenger volumes. The analysis identifies London, Paris, Madrid, Barcelona, Rome, Milan, Amsterdam and Vienna as consistently high-volume candidates in both scenarios, with London and Vienna examined in detail as contrasting cases. The 2050 scenario integrates planned, funded and aspirational TEN-T high-speed projects and is therefore presented as an upper-bound accessibility experiment reflecting stated political intent, rather than as a delivery forecast; the identified corridors are candidate relations for subsequent, more detailed operational feasibility work, and the reported rankings are conditional on the applied 6.5–13 h rail-window definition. The results suggest, as a hypothesis to be tested in subsequent operational studies, that high-speed night trains and daytime high-speed services may act as complementary segments of a single long-distance rail offering, whose realisable modal shift will ultimately depend on price, comfort and operational conditions not modelled here.