Jaime Navarrete Damian
Research Subjects
Jaime Navarrete Damian has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Cornelio Morales-Morales
Technological Institute of San Juan del Río, National Technological Institute of Mexico, San Juan del Río 76800, Querétaro, Mexico
2 shared publications - Angel Custodio Navarrete-Fernández
Tecnológico Nacional de México
1 shared publication - Armida González-Lorence
Tecnológico Nacional de México/Instituto Tecnológico de San Juan del Río, San Juan del Río CP 76800, Querétaro, Mexico
1 shared publication Jenifer Ledesma-Díaz
1 shared publication- Jorge Enrique Taboada-Alvarez1 shared publication
- José Gabriel Ayala Landeros
Tecnológico Nacional de México/Instituto Tecnológico de San Juan del Río
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
The integration of Social Responsibility in the marketing of micro and small companies
The present research aims to analyze the impact of social responsibility on the marketing of micro and small enterprise (MSEs) in the municipality of San Juan del Río, Querétaro, Mexico. A quantitative, cross-sectional correlational research method was used, employing a questionnaire instrument with a Likert scale applied to the directors of the MSEs, based on the annual research conducted by the Research Network in Administration and Business (RELAYN), considering 11 items. In the first stage, a normality test was conducted using the Kolmogorov-Smirnov method, determining that the data did not exhibit a normal distribution. In the second stage, the reliability of the instrument was determined, obtaining a Cronbach's Alpha of 0.812 and a McDonald's Omega of 0.793 across the entire scale, both considered to indicate high reliability. For stage three, the correlation analysis was carried out, determining a weak to moderate relationship. In the third stage, a correlation analysis was performed, determining a weak to moderate relationship. In the fourth stage, an Ordinal Logistic Regression analysis was carried out, determining that the element of Social Responsibility (SR) that most impacts Marketing (MK) is community development (SR6).
- 1 January 2025
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
Open AccessThe integration of Social Responsibility in the marketing of micro and small companies
The present research aims to analyze the impact of social responsibility on the marketing of micro and small enterprise (MSEs) in the municipality of San Juan del Río, Querétaro, Mexico. A quantitative, cross-sectional correlational research method was used, employing a questionnaire instrument with a Likert scale applied to the directors of the MSEs, based on the annual research conducted by the Research Network in Administration and Business (RELAYN), considering 11 items. In the first stage, a normality test was conducted using the Kolmogorov-Smirnov method, determining that the data did not exhibit a normal distribution. In the second stage, the reliability of the instrument was determined, obtaining a Cronbach's Alpha of 0.812 and a McDonald's Omega of 0.793 across the entire scale, both considered to indicate high reliability. For stage three, the correlation analysis was carried out, determining a weak to moderate relationship. In the third stage, a correlation analysis was performed, determining a weak to moderate relationship. In the fourth stage, an Ordinal Logistic Regression analysis was carried out, determining that the element of Social Responsibility (SR) that most impacts Marketing (MK) is community development (SR6).
- Open Access
- 2 February 2024
- Published by MDPI AG in Preprints.org
Optimizing Productivity Indicators through the Implementation of Industry 4.0 Technologies
Key performance indicators are essential for any company to enhance its competitiveness. How-ever, a common issue is the manual collection of production data using record sheets, which are later digitized on desktop computers and processed in Excel sheets. Shockingly, 41% of companies in Mexico have no plans for digitalization. This work aims to develop a Real-time Productivity Indicator Monitoring System using Industry 4.0 technologies for a medium-sized manufacturing firm specializing in die-cutting automotive parts. The Advanced Quality Planning methodology was applied to develop the Conceptual, Product, and Process Engineering and its validation. The experimental tests demonstrated a reliability level of 99.98%, which exceeded initial expectations. The primary contributions presented in this work are related to the development of algorithms, communication protocols, data analysis, and general optimization of the calculation process. The study's only limitation was the short experimentation time.
- 2 February 2024
- Published by MDPI AG in Preprints.org
Open AccessOptimizing Productivity Indicators through the Implementation of Industry 4.0 Technologies
Key performance indicators are essential for any company to enhance its competitiveness. How-ever, a common issue is the manual collection of production data using record sheets, which are later digitized on desktop computers and processed in Excel sheets. Shockingly, 41% of companies in Mexico have no plans for digitalization. This work aims to develop a Real-time Productivity Indicator Monitoring System using Industry 4.0 technologies for a medium-sized manufacturing firm specializing in die-cutting automotive parts. The Advanced Quality Planning methodology was applied to develop the Conceptual, Product, and Process Engineering and its validation. The experimental tests demonstrated a reliability level of 99.98%, which exceeded initial expectations. The primary contributions presented in this work are related to the development of algorithms, communication protocols, data analysis, and general optimization of the calculation process. The study's only limitation was the short experimentation time.
- Open Access
- 1 January 2024
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
Developement of a radio-controlled mobile robot applied to underground mining
Mining, as a productive sector, is a high-risk activity for the safety and health of the miner. In underground copper, silver, and zinc mines, the presence of toxic gas such as carbon monoxide (CO) during the excavation phase is common, while in coal mines, the presence of explosive gas, such as methane (CH4), is common. The presence of these gases becomes a potential danger to the workers themselves due to inhalation or explosion in the absence of prevention. The latest official public report from the Camara Minera de Mexico (Mexican Mining Chamber) provides a figure of 322 deaths in underground mines during the period from 2010 to 2015 in national territory. Therefore, the use of a radio-controlled mobile robot equipped with instruments for exploration, supervision, and monitoring inside an underground mine is proposed in order to minimize the risk to the physical integrity of the miners. The W methodology developed by Nattermann Roland was used in the construction of the prototype. The project consists of the integration of a commercial robotic structure, a radio control system for aeromodelling, an infrared vision wireless system, a wireless video monitor, a methane gas sensor (MQ4), a carbon monoxide sensor (MQ7), a relative humidity sensor (HMZA-331), a temperature sensor (LM35), a Tx-Rx radio communication system with XBee® technology, a digital control system with PIC microcontroller, and a portable data receiver module. The portable module displays measurements of gas concentration, relative humidity, temperature, and includes an audible alarm and a visible red light alarm. The results obtained so far consist of a radio-controlled mobile robot with track traction and differential movement, equipped with instruments capable of detecting the presence of toxic (CO) or explosive (CH4) gas in the environment with an average displacement speed of 0.31 m/s, an average communication range of 600 m outdoors and 250 m indoors, and an average autonomy of 40 min. The use of a radio-controlled mobile robot in underground mines is considered a useful technological tool in hostile and high-risk environments. The results achieved so far have demonstrated that the radio-controlled mobile robot is a viable option in the mining industry in Mexico; but also, it is a fertile area of research to implement other types of technologies such as developement with machine learning.
- 1 January 2024
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
Open AccessDevelopement of a radio-controlled mobile robot applied to underground mining
Mining, as a productive sector, is a high-risk activity for the safety and health of the miner. In underground copper, silver, and zinc mines, the presence of toxic gas such as carbon monoxide (CO) during the excavation phase is common, while in coal mines, the presence of explosive gas, such as methane (CH4), is common. The presence of these gases becomes a potential danger to the workers themselves due to inhalation or explosion in the absence of prevention. The latest official public report from the Camara Minera de Mexico (Mexican Mining Chamber) provides a figure of 322 deaths in underground mines during the period from 2010 to 2015 in national territory. Therefore, the use of a radio-controlled mobile robot equipped with instruments for exploration, supervision, and monitoring inside an underground mine is proposed in order to minimize the risk to the physical integrity of the miners. The W methodology developed by Nattermann Roland was used in the construction of the prototype. The project consists of the integration of a commercial robotic structure, a radio control system for aeromodelling, an infrared vision wireless system, a wireless video monitor, a methane gas sensor (MQ4), a carbon monoxide sensor (MQ7), a relative humidity sensor (HMZA-331), a temperature sensor (LM35), a Tx-Rx radio communication system with XBee® technology, a digital control system with PIC microcontroller, and a portable data receiver module. The portable module displays measurements of gas concentration, relative humidity, temperature, and includes an audible alarm and a visible red light alarm. The results obtained so far consist of a radio-controlled mobile robot with track traction and differential movement, equipped with instruments capable of detecting the presence of toxic (CO) or explosive (CH4) gas in the environment with an average displacement speed of 0.31 m/s, an average communication range of 600 m outdoors and 250 m indoors, and an average autonomy of 40 min. The use of a radio-controlled mobile robot in underground mines is considered a useful technological tool in hostile and high-risk environments. The results achieved so far have demonstrated that the radio-controlled mobile robot is a viable option in the mining industry in Mexico; but also, it is a fertile area of research to implement other types of technologies such as developement with machine learning.