Lingwen Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lingwen Tan has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Limin Zhu
Shanghai Jiao Tong University
6 shared publications - Xiangyuan Wang
State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, China
6 shared publications - Yixuan Meng
State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, China
5 shared publications - Linlin Li
Weill Cornell Medicine, Department of Anesthesiology, New York, USA
4 shared publications - Qi Yu
State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, China
4 shared publications - Bocheng Yu
State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, P. R. China
3 shared publications
Latest Publications
- 4 March 2026
- Published by Elsevier in Precision Engineering
- Vol. 100, 70-84
Ultra-precision truing of profile replication grinding wheel with tool profile errors compensation
- 4 March 2026
- Published by Elsevier in Precision Engineering
- Vol. 100, 70-84
Ultra-precision truing of profile replication grinding wheel with tool profile errors compensation
- Open Access
- 5 November 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 39, 6435-6447
Anisotropic plasticity and fracture mechanisms of single-crystal CaF2 under indentation: Insights from crystal plasticity simulation and experiment
- 5 November 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 39, 6435-6447
Open AccessAnisotropic plasticity and fracture mechanisms of single-crystal CaF2 under indentation: Insights from crystal plasticity simulation and experiment
- 6 July 2025
- Published by Elsevier in Precision Engineering
- Vol. 96, 487-496
An H∞ optimization-based high-gain loop-shaping method for precision motion control of nano-positioning systems
- 6 July 2025
- Published by Elsevier in Precision Engineering
- Vol. 96, 487-496
An H∞ optimization-based high-gain loop-shaping method for precision motion control of nano-positioning systems
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 13939-13948
High-Throughput Uniform Scanning of Stick-Slip Actuators With Optimal Smooth Trajectory
Achieving high-throughput uniform scanning of stick-slip actuators is challenging because the conventional sharp triangular trajectory can easily induce dynamic friction between the compliant mechanism and the end-effector, which can lead to scanning failures. To address these issues, this article proposes a smooth trajectory that integrates a linear rising edge for uniform sampling with a cubic B-spline curve for smooth transitions. By optimizing the parameters, the trajectory effectively minimizes peak acceleration and reduces high-frequency components, thereby enhancing both scanning throughput and accuracy. The experimental results demonstrated that the proposed trajectory yielded a scanning throughput 2.86 times greater than that achieved with the conventional triangular trajectory. Moreover, the proposed trajectory demonstrated superior accuracy in scanning across all tested frequencies. This advancement is significant for expanding the applications of stick-slip actuators in high-throughput scenarios.
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 13939-13948
High-Throughput Uniform Scanning of Stick-Slip Actuators With Optimal Smooth Trajectory
Achieving high-throughput uniform scanning of stick-slip actuators is challenging because the conventional sharp triangular trajectory can easily induce dynamic friction between the compliant mechanism and the end-effector, which can lead to scanning failures. To address these issues, this article proposes a smooth trajectory that integrates a linear rising edge for uniform sampling with a cubic B-spline curve for smooth transitions. By optimizing the parameters, the trajectory effectively minimizes peak acceleration and reduces high-frequency components, thereby enhancing both scanning throughput and accuracy. The experimental results demonstrated that the proposed trajectory yielded a scanning throughput 2.86 times greater than that achieved with the conventional triangular trajectory. Moreover, the proposed trajectory demonstrated superior accuracy in scanning across all tested frequencies. This advancement is significant for expanding the applications of stick-slip actuators in high-throughput scenarios.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Profile-Aided Subaperture Stitching Algorithm for the Measurement of Microlens Array Optics by Coherence Scanning Interferometry
Microlens array optics play a crucial role in imaging systems. Its surface topography substantially influences its functional properties, e.g., uniformity of light field intensity distribution. Sub-aperture stitching is a widely-used method for measuring the overall surface topography of optics. However, stitched surfaces of the classical and state-of-the-art instrument’s algorithm deviate substantially from the real surface due to accumulated errors when stitching numerous sub-apertures. Achieving accurate areal surface topography measurement of microlens arrays thus remains a considerable challenge. This study proposes a profile-aided stitching algorithm that eliminates accumulated errors by incorporating data from an ultra-precision three-dimensional profilometer. An error function is designed to integrate additional profile information, which comprises the weighted sum of errors between adjacent sub-apertures and the profile derived errors. Determining matching point pairs and minimizing the error function are iteratively performed to improve the stitching accuracy. Both simulation and real experiment support that error of stitched surface of proposed method reaches the same level as the instrument’s error, and stitching accuracy of proposed method reaches nanometric level, satisfying the nanometric measurement accuracy requirements of microlens array optics.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Profile-Aided Subaperture Stitching Algorithm for the Measurement of Microlens Array Optics by Coherence Scanning Interferometry
Microlens array optics play a crucial role in imaging systems. Its surface topography substantially influences its functional properties, e.g., uniformity of light field intensity distribution. Sub-aperture stitching is a widely-used method for measuring the overall surface topography of optics. However, stitched surfaces of the classical and state-of-the-art instrument’s algorithm deviate substantially from the real surface due to accumulated errors when stitching numerous sub-apertures. Achieving accurate areal surface topography measurement of microlens arrays thus remains a considerable challenge. This study proposes a profile-aided stitching algorithm that eliminates accumulated errors by incorporating data from an ultra-precision three-dimensional profilometer. An error function is designed to integrate additional profile information, which comprises the weighted sum of errors between adjacent sub-apertures and the profile derived errors. Determining matching point pairs and minimizing the error function are iteratively performed to improve the stitching accuracy. Both simulation and real experiment support that error of stitched surface of proposed method reaches the same level as the instrument’s error, and stitching accuracy of proposed method reaches nanometric level, satisfying the nanometric measurement accuracy requirements of microlens array optics.
- 26 February 2025
- Published by Elsevier in Precision Engineering
- Vol. 94, 264-277
Hybrid dual-stage fast tool servo for integrated machining and measurement of optical microstructures
- 26 February 2025
- Published by Elsevier in Precision Engineering
- Vol. 94, 264-277
Hybrid dual-stage fast tool servo for integrated machining and measurement of optical microstructures
- 18 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (1) , 1003-1013
Serial-Kinematic Hybrid Electromagnetic-Piezoelectric AFM Scanner for High-Throughput Raster Scanning
High-throughput raster scanning enables high-rate atomic force microscopy (AFM) imaging in a large area. This article proposes a novel serial-kinematic tri-axial AFM scanner to meet the different stroke and bandwidth requirements of each axis in AFM raster scanning. By means of hybrid actuation, this scanner combines the high-force-density and long-range merits of the normal-stressed electromagnetic actuator (NSEA) and the high-resonant-frequency advantage of the piezoelectric actuator (PEA). The X - and Y -stages are actuated by the self-developed NSEAs. Specifically, the X -axial moving mass is minimized by elaborately designing the serial kinematics and the flexure-internal structure. Thus, a high resonant frequency of 1313.2 Hz is achieved along the X -axis while realizing a 212.7 $\mu$ m stroke. The Y -stage is designed with a large moving platform. Thus, it can carry the entire XZ -stage to conduct the long-range Y -axial scanning. As for the Z -stage, a PEA is adopted as the actuator to track the surface topography at a high rate. The advancement of the proposed scanner is demonstrated in AFM imaging. Excellent results in both the large-area coarse scanning and the high-speed, high-resolution fine scanning reveal the strong nanopositioning capability of this development.
- 18 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (1) , 1003-1013
Serial-Kinematic Hybrid Electromagnetic-Piezoelectric AFM Scanner for High-Throughput Raster Scanning
High-throughput raster scanning enables high-rate atomic force microscopy (AFM) imaging in a large area. This article proposes a novel serial-kinematic tri-axial AFM scanner to meet the different stroke and bandwidth requirements of each axis in AFM raster scanning. By means of hybrid actuation, this scanner combines the high-force-density and long-range merits of the normal-stressed electromagnetic actuator (NSEA) and the high-resonant-frequency advantage of the piezoelectric actuator (PEA). The X - and Y -stages are actuated by the self-developed NSEAs. Specifically, the X -axial moving mass is minimized by elaborately designing the serial kinematics and the flexure-internal structure. Thus, a high resonant frequency of 1313.2 Hz is achieved along the X -axis while realizing a 212.7 $\mu$ m stroke. The Y -stage is designed with a large moving platform. Thus, it can carry the entire XZ -stage to conduct the long-range Y -axial scanning. As for the Z -stage, a PEA is adopted as the actuator to track the surface topography at a high rate. The advancement of the proposed scanner is demonstrated in AFM imaging. Excellent results in both the large-area coarse scanning and the high-speed, high-resolution fine scanning reveal the strong nanopositioning capability of this development.
- 21 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-13
An Electromagnetic-Piezoelectric Hybrid Actuated Nanopositioner for Atomic Force Microscopy
An electromagnetic-piezoelectric hybrid actuated nanopositioner for atomic force microscopy (AFM) is proposed. Applying the hybrid serial-parallel-kinetic design, the parallel xy -stage is actuated by the normal-stressed electromagnetic actuators to conduct planar scanning in a large scope. The z -axis is serially carried by the xy -stage and is actuated by a piezoelectric actuator (PEA) to track the sample’s topography with high speed. Moreover, a novel flexure mechanism is proposed for motion guidance and decoupling of the xy -stage, featuring the higher resonant frequency along the x -axis to satisfy the requirement of a faster planar axis in AFM imaging. The analytical model of the nanopositioner is established to optimally determine the parameters, and the results are verified by finite-element analysis. A prototype is fabricated and tested. Experimental results demonstrate that the triaxial strokes of 94.4 μm (x-axis), 102.8 μm ( y -axis), and 5.22 μm ( z -axis) are achieved, and the resonant frequencies are identified as 735 Hz ( x -axis), 650 Hz ( y -axis), and 6340 Hz ( z -axis), respectively. The implemented feedback controllers ensure the accuracy of high-speed trajectory tracking. Finally, the AFM imaging based on the proposed nanopositioner is conducted, confirming its effectiveness for large-scope and high-rate AFM imaging.
- 21 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-13
An Electromagnetic-Piezoelectric Hybrid Actuated Nanopositioner for Atomic Force Microscopy
An electromagnetic-piezoelectric hybrid actuated nanopositioner for atomic force microscopy (AFM) is proposed. Applying the hybrid serial-parallel-kinetic design, the parallel xy -stage is actuated by the normal-stressed electromagnetic actuators to conduct planar scanning in a large scope. The z -axis is serially carried by the xy -stage and is actuated by a piezoelectric actuator (PEA) to track the sample’s topography with high speed. Moreover, a novel flexure mechanism is proposed for motion guidance and decoupling of the xy -stage, featuring the higher resonant frequency along the x -axis to satisfy the requirement of a faster planar axis in AFM imaging. The analytical model of the nanopositioner is established to optimally determine the parameters, and the results are verified by finite-element analysis. A prototype is fabricated and tested. Experimental results demonstrate that the triaxial strokes of 94.4 μm (x-axis), 102.8 μm ( y -axis), and 5.22 μm ( z -axis) are achieved, and the resonant frequencies are identified as 735 Hz ( x -axis), 650 Hz ( y -axis), and 6340 Hz ( z -axis), respectively. The implemented feedback controllers ensure the accuracy of high-speed trajectory tracking. Finally, the AFM imaging based on the proposed nanopositioner is conducted, confirming its effectiveness for large-scope and high-rate AFM imaging.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 15130-15139
A Normal-Stressed Electromagnetic-Driven Stiffness-Tunable Nanopositioner
High-bandwidth and long-range nanoprecision motion is crucially required by many advanced instruments and robotic systems, which rely on the nanopositioners. However, traditional nanopositioners suffer from their fixed stiffness and can only obtain fixed performance, leading to narrow applications. Here, a novel nanopositioner called normal-stressed electromagnetic-driven stiffness-tunable nanopositioner (EDSTN) is presented, which consists of three parts: A normal-stressed electromagnetic actuator to generate the actuation force, a high-stiffness compliant mechanism for guiding the fast precision motion, and a tunable negative stiffness electromagnetic spring to control the overall effective stiffness. The EDSTN realizes a stiffness tuning ratio of 3.24×, enabling an in situ, fast, and continuous performance tuning to meet the changing requirements. It holds promising prospects in constructing highly flexible precision devices, and the implementation of atomic force microscopy measurements on different samples validates its effectiveness. This work provides a new direction to develop versatile nanopositioners.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 15130-15139
A Normal-Stressed Electromagnetic-Driven Stiffness-Tunable Nanopositioner
High-bandwidth and long-range nanoprecision motion is crucially required by many advanced instruments and robotic systems, which rely on the nanopositioners. However, traditional nanopositioners suffer from their fixed stiffness and can only obtain fixed performance, leading to narrow applications. Here, a novel nanopositioner called normal-stressed electromagnetic-driven stiffness-tunable nanopositioner (EDSTN) is presented, which consists of three parts: A normal-stressed electromagnetic actuator to generate the actuation force, a high-stiffness compliant mechanism for guiding the fast precision motion, and a tunable negative stiffness electromagnetic spring to control the overall effective stiffness. The EDSTN realizes a stiffness tuning ratio of 3.24×, enabling an in situ, fast, and continuous performance tuning to meet the changing requirements. It holds promising prospects in constructing highly flexible precision devices, and the implementation of atomic force microscopy measurements on different samples validates its effectiveness. This work provides a new direction to develop versatile nanopositioners.