Yao Ge
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yao Ge has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
- Mathew R. Heal
School of Chemistry, University of Edinburgh, Edinburgh, EH9 3FJ, UK
19 shared publications - David Simpson
Norwegian Meteorological Institute (Met Norway), Oslo, Norway
15 shared publications Massimo Vieno
UK Centre for Ecology & Hydrology, Bush Estate, Penicuik, Edinburgh EH26 0QB, UK
13 shared publicationsBryan Hellack
Umweltbundesamt (UBA), Langen, Germany
12 shared publications- Stefan Reimann
Swiss Federal Laboratories for Materials Science and Technology, Empa, 8600 Dübendorf, Switzerland
12 shared publications Sverre Solberg
NILU, Kjeller, Norway
12 shared publications
Latest Publications
- Open Access
- 26 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-32
Comment on egusphere-2026-4710
Marine sulfur species play a key role in the Earth system, but simulating their complex oxidation mechanisms is a significant challenge for Earth system models. We have taken a comprehensive gas-phase mechanism of the OH and NO3-initiated oxidation of dimethyl sulfide and methanethiol (156 reactions and 55 sulfur species) and generated a series of reduced complexity mechanisms using an automated rates-based approach for future incorporation into global models. Four reduced mechanisms were produced, ranging from 38–91 reactions. While the error in the reduced mechanisms typically increased with fewer reactions, the smallest mechanism, which included 38 reactions and 18 species, had an average error of less than 15 % in the concentrations of key sulfur species compared to the full mechanism. This reduced mechanism was compared to a published mechanism of similar size (38 reactions) used in global modelling, which showed average concentrations of methanesulfonic acid and OCS differed by factors of 15 and 3.6, respectively, across all marine box models. While the most reduced mechanism constitutes a large increase in the number of reactions and species typically used in Earth system models for dimethyl sulfide and methanethiol, it provides a traceable link to the most recent experimental work on the subject. To assess its performance in a global modelling framework, an adapted reduced mechanism from this work was implemented into UKCA/UKESM, where it outperformed the highly simplified StratTrop dimethyl sulfide oxidation mechanism when evaluated against ATom-3 and ATom-4 measurements.
- 26 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-32
Open AccessComment on egusphere-2026-4710
Marine sulfur species play a key role in the Earth system, but simulating their complex oxidation mechanisms is a significant challenge for Earth system models. We have taken a comprehensive gas-phase mechanism of the OH and NO3-initiated oxidation of dimethyl sulfide and methanethiol (156 reactions and 55 sulfur species) and generated a series of reduced complexity mechanisms using an automated rates-based approach for future incorporation into global models. Four reduced mechanisms were produced, ranging from 38–91 reactions. While the error in the reduced mechanisms typically increased with fewer reactions, the smallest mechanism, which included 38 reactions and 18 species, had an average error of less than 15 % in the concentrations of key sulfur species compared to the full mechanism. This reduced mechanism was compared to a published mechanism of similar size (38 reactions) used in global modelling, which showed average concentrations of methanesulfonic acid and OCS differed by factors of 15 and 3.6, respectively, across all marine box models. While the most reduced mechanism constitutes a large increase in the number of reactions and species typically used in Earth system models for dimethyl sulfide and methanethiol, it provides a traceable link to the most recent experimental work on the subject. To assess its performance in a global modelling framework, an adapted reduced mechanism from this work was implemented into UKCA/UKESM, where it outperformed the highly simplified StratTrop dimethyl sulfide oxidation mechanism when evaluated against ATom-3 and ATom-4 measurements.
- Open Access
- 28 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-32
Comment on egusphere-2026-4710
Marine sulfur species play a key role in the Earth system, but simulating their complex oxidation mechanisms is a significant challenge for Earth system models. We have taken a comprehensive gas-phase mechanism of the OH and NO3-initiated oxidation of dimethyl sulfide and methanethiol (156 reactions and 55 sulfur species) and generated a series of reduced complexity mechanisms using an automated rates-based approach for future incorporation into global models. Four reduced mechanisms were produced, ranging from 38–91 reactions. While the error in the reduced mechanisms typically increased with fewer reactions, the smallest mechanism, which included 38 reactions and 18 species, had an average error of less than 15 % in the concentrations of key sulfur species compared to the full mechanism. This reduced mechanism was compared to a published mechanism of similar size (38 reactions) used in global modelling, which showed average concentrations of methanesulfonic acid and OCS differed by factors of 15 and 3.6, respectively, across all marine box models. While the most reduced mechanism constitutes a large increase in the number of reactions and species typically used in Earth system models for dimethyl sulfide and methanethiol, it provides a traceable link to the most recent experimental work on the subject. To assess its performance in a global modelling framework, an adapted reduced mechanism from this work was implemented into UKCA/UKESM, where it outperformed the highly simplified StratTrop dimethyl sulfide oxidation mechanism when evaluated against ATom-3 and ATom-4 measurements.
- 28 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-32
Open AccessComment on egusphere-2026-4710
Marine sulfur species play a key role in the Earth system, but simulating their complex oxidation mechanisms is a significant challenge for Earth system models. We have taken a comprehensive gas-phase mechanism of the OH and NO3-initiated oxidation of dimethyl sulfide and methanethiol (156 reactions and 55 sulfur species) and generated a series of reduced complexity mechanisms using an automated rates-based approach for future incorporation into global models. Four reduced mechanisms were produced, ranging from 38–91 reactions. While the error in the reduced mechanisms typically increased with fewer reactions, the smallest mechanism, which included 38 reactions and 18 species, had an average error of less than 15 % in the concentrations of key sulfur species compared to the full mechanism. This reduced mechanism was compared to a published mechanism of similar size (38 reactions) used in global modelling, which showed average concentrations of methanesulfonic acid and OCS differed by factors of 15 and 3.6, respectively, across all marine box models. While the most reduced mechanism constitutes a large increase in the number of reactions and species typically used in Earth system models for dimethyl sulfide and methanethiol, it provides a traceable link to the most recent experimental work on the subject. To assess its performance in a global modelling framework, an adapted reduced mechanism from this work was implemented into UKCA/UKESM, where it outperformed the highly simplified StratTrop dimethyl sulfide oxidation mechanism when evaluated against ATom-3 and ATom-4 measurements.
- Open Access
- 18 August 2026
- Published by Copernicus GmbH
Supplementary material to "Reduction and evaluation of a near-explicit dimethyl sulfide and methanethiol oxidation mechanism"
- 18 August 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "Reduction and evaluation of a near-explicit dimethyl sulfide and methanethiol oxidation mechanism"
- Open Access
- 18 August 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-32
Reduction and evaluation of a near-explicit dimethyl sulfide and methanethiol oxidation mechanism
Marine sulfur species play a key role in the Earth system, but simulating their complex oxidation mechanisms is a significant challenge for Earth system models. We have taken a comprehensive gas-phase mechanism of the OH and NO3-initiated oxidation of dimethyl sulfide and methanethiol (156 reactions and 55 sulfur species) and generated a series of reduced complexity mechanisms using an automated rates-based approach for future incorporation into global models. Four reduced mechanisms were produced, ranging from 38–91 reactions. While the error in the reduced mechanisms typically increased with fewer reactions, the smallest mechanism, which included 38 reactions and 18 species, had an average error of less than 15 % in the concentrations of key sulfur species compared to the full mechanism. This reduced mechanism was compared to a published mechanism of similar size (38 reactions) used in global modelling, which showed average concentrations of methanesulfonic acid and OCS differed by factors of 15 and 3.6, respectively, across all marine box models. While the most reduced mechanism constitutes a large increase in the number of reactions and species typically used in Earth system models for dimethyl sulfide and methanethiol, it provides a traceable link to the most recent experimental work on the subject. To assess its performance in a global modelling framework, an adapted reduced mechanism from this work was implemented into UKCA/UKESM, where it outperformed the highly simplified StratTrop dimethyl sulfide oxidation mechanism when evaluated against ATom-3 and ATom-4 measurements.
- 18 August 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-32
Open AccessReduction and evaluation of a near-explicit dimethyl sulfide and methanethiol oxidation mechanism
Marine sulfur species play a key role in the Earth system, but simulating their complex oxidation mechanisms is a significant challenge for Earth system models. We have taken a comprehensive gas-phase mechanism of the OH and NO3-initiated oxidation of dimethyl sulfide and methanethiol (156 reactions and 55 sulfur species) and generated a series of reduced complexity mechanisms using an automated rates-based approach for future incorporation into global models. Four reduced mechanisms were produced, ranging from 38–91 reactions. While the error in the reduced mechanisms typically increased with fewer reactions, the smallest mechanism, which included 38 reactions and 18 species, had an average error of less than 15 % in the concentrations of key sulfur species compared to the full mechanism. This reduced mechanism was compared to a published mechanism of similar size (38 reactions) used in global modelling, which showed average concentrations of methanesulfonic acid and OCS differed by factors of 15 and 3.6, respectively, across all marine box models. While the most reduced mechanism constitutes a large increase in the number of reactions and species typically used in Earth system models for dimethyl sulfide and methanethiol, it provides a traceable link to the most recent experimental work on the subject. To assess its performance in a global modelling framework, an adapted reduced mechanism from this work was implemented into UKCA/UKESM, where it outperformed the highly simplified StratTrop dimethyl sulfide oxidation mechanism when evaluated against ATom-3 and ATom-4 measurements.
- Open Access
- 22 June 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (12) , 8717-8751
Measurement report: Spatial variability of VOCs, ozone, and carbonaceous aerosols during the 2022 European summer heatwave
This study presents results from an Intensive Measurement Period (IMP2022) conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Coordinated measurements and chemistry transport modelling were used to examine the spatial variability of ozone, VOC composition, and secondary organic aerosol (SOA) formation under extreme meteorological conditions. Oxygenated VOCs (O-VOCs) constituted the largest fraction of total measured VOC mixing ratios, followed by non-methane hydrocarbons (NMHCs) and aromatics, with contributions from both anthropogenic and biogenic sources. Sensitivity simulations indicate that ozone formation was predominantly NOx-limited across most regions during IMP2022. However, the highest ozone peaks occurred under conditions of elevated NOx in combination with enhanced BVOC emissions. In contrast, SOA formation was slightly enhanced under low-NOx conditions and reduced in elevated NOx. Isoprene, aliphatic NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were major contributors to SOA potential. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality under future climate extremes.
- 22 June 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (12) , 8717-8751
Open AccessMeasurement report: Spatial variability of VOCs, ozone, and carbonaceous aerosols during the 2022 European summer heatwave
This study presents results from an Intensive Measurement Period (IMP2022) conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Coordinated measurements and chemistry transport modelling were used to examine the spatial variability of ozone, VOC composition, and secondary organic aerosol (SOA) formation under extreme meteorological conditions. Oxygenated VOCs (O-VOCs) constituted the largest fraction of total measured VOC mixing ratios, followed by non-methane hydrocarbons (NMHCs) and aromatics, with contributions from both anthropogenic and biogenic sources. Sensitivity simulations indicate that ozone formation was predominantly NOx-limited across most regions during IMP2022. However, the highest ozone peaks occurred under conditions of elevated NOx in combination with enhanced BVOC emissions. In contrast, SOA formation was slightly enhanced under low-NOx conditions and reduced in elevated NOx. Isoprene, aliphatic NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were major contributors to SOA potential. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality under future climate extremes.
- Open Access
- 17 March 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (5) , 3805-3851
Evaluation of UKESM aerosol size and composition using ATom measurements indicates missing marine aerosol formation mechanisms
Atmospheric aerosols influence climate through their interactions with radiation and clouds, yet large uncertainties remain in their simulation by global models. This study evaluates the United Kingdom Earth System Model version 1.1 (UKESM1.1) using global-scale aircraft observations from the Atmospheric Tomography (ATom) mission, focusing on aerosol lifecycle processes in the remote marine atmosphere. We assess model performance in simulating aerosol precursor vapours, number size distributions, chemical composition, and environmental conditions. Several process improvements are tested, including sulfuric acid-ammonia nucleation, ammonium nitrate scheme, methanesulfonic acid condensation, and low-temperature isoprene-derived secondary organic aerosol formation. Model biases differ significantly between the upper troposphere (UT) and the marine boundary layer (MBL). In the UT, UKESM1.1 overestimates nucleation and Aitken mode particles while underestimating accumulation mode, indicating insufficient growth. In the MBL, the model overestimates primary aerosols (e.g. seasalt) and precursor gases but underestimates nucleation and Aitken mode particles, even after incorporating updated nucleation and ammonium nitrate scheme. The persistence of low aerosol number concentrations, despite overestimated precursors, suggests missing formation pathways likely involving other species such as iodine, amines, and organic vapours. These limitations result in an unbalanced cloud condensation nuclei budget that over-relies on primary emissions. Sensitivity tests reveal that model outputs are strongly influenced by dimethyl sulfide emissions and vapour condensation schemes. Our results highlight the need for future model development to prioritise mechanistic representation of currently missing aerosol sources, rather than relying on empirical tuning, to improve aerosol-climate interaction estimates.
- 17 March 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (5) , 3805-3851
Open AccessEvaluation of UKESM aerosol size and composition using ATom measurements indicates missing marine aerosol formation mechanisms
Atmospheric aerosols influence climate through their interactions with radiation and clouds, yet large uncertainties remain in their simulation by global models. This study evaluates the United Kingdom Earth System Model version 1.1 (UKESM1.1) using global-scale aircraft observations from the Atmospheric Tomography (ATom) mission, focusing on aerosol lifecycle processes in the remote marine atmosphere. We assess model performance in simulating aerosol precursor vapours, number size distributions, chemical composition, and environmental conditions. Several process improvements are tested, including sulfuric acid-ammonia nucleation, ammonium nitrate scheme, methanesulfonic acid condensation, and low-temperature isoprene-derived secondary organic aerosol formation. Model biases differ significantly between the upper troposphere (UT) and the marine boundary layer (MBL). In the UT, UKESM1.1 overestimates nucleation and Aitken mode particles while underestimating accumulation mode, indicating insufficient growth. In the MBL, the model overestimates primary aerosols (e.g. seasalt) and precursor gases but underestimates nucleation and Aitken mode particles, even after incorporating updated nucleation and ammonium nitrate scheme. The persistence of low aerosol number concentrations, despite overestimated precursors, suggests missing formation pathways likely involving other species such as iodine, amines, and organic vapours. These limitations result in an unbalanced cloud condensation nuclei budget that over-relies on primary emissions. Sensitivity tests reveal that model outputs are strongly influenced by dimethyl sulfide emissions and vapour condensation schemes. Our results highlight the need for future model development to prioritise mechanistic representation of currently missing aerosol sources, rather than relying on empirical tuning, to improve aerosol-climate interaction estimates.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Targeted model developments to improve consistency of observational constraints and reduce aerosol forcing uncertainty
Uncertainty in aerosol radiative forcing remains high, which limits confidence in climate projections. Climate models depend on uncertain input parameters, and observations are used to constrain this uncertainty by ruling out parameter values that are unlikely. However, it is often not possible to tune a model to agree with multiple observations at the same time. Even when parameter uncertainty is sampled widely, some observational constraints are mutually inconsistent; i.e., they require opposing parameter values and therefore cannot be used together. These inconsistencies in observational constraints indicate structural issues in the way that aerosol processes are modelled, and limit how far parameter uncertainty ranges (and thus forcing estimates) can be reduced.In this presentation, we describe how targeted model developments can help address inconsistencies in observational constraints and thereby help to reduce forcing uncertainty. In previous work, we introduced a workflow to detect potential structural inconsistencies by using a perturbed parameter ensemble (PPE) of the UK Earth System Model. The workflow revealed inter‑region and inter‑variable inconsistencies. For example, sulfate aerosol concentrations in different regions could not be consistently constrained, and constraint of aerosol optical depth degraded model performance for sulfate concentrations.Here, we extend that approach using a new PPE that includes targeted structural changes designed to address the identified deficiencies. We reapply the same observational constraints and test whether the consistency of constraints improves, and whether there are any remaining structural deficiencies. We also assess the connection to aerosol radiative forcing: whether constraints that previously led to opposing aerosol radiative forcing values now align, and whether that alignment leads to more consistent forcing (and less uncertain) values across observational constraints.This work demonstrates a practical path to directly target two interlinked causes of model uncertainty (parametric and structural): use model-observation inconsistencies to diagnose potential structural errors, implement targeted model developments, and iterate. The outcome is an evidence‑based development cycle that aims to make more observations usable simultaneously, reduce parametric and structural uncertainty, and ultimately contribute to reducing uncertainty in climate projections.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessTargeted model developments to improve consistency of observational constraints and reduce aerosol forcing uncertainty
Uncertainty in aerosol radiative forcing remains high, which limits confidence in climate projections. Climate models depend on uncertain input parameters, and observations are used to constrain this uncertainty by ruling out parameter values that are unlikely. However, it is often not possible to tune a model to agree with multiple observations at the same time. Even when parameter uncertainty is sampled widely, some observational constraints are mutually inconsistent; i.e., they require opposing parameter values and therefore cannot be used together. These inconsistencies in observational constraints indicate structural issues in the way that aerosol processes are modelled, and limit how far parameter uncertainty ranges (and thus forcing estimates) can be reduced.In this presentation, we describe how targeted model developments can help address inconsistencies in observational constraints and thereby help to reduce forcing uncertainty. In previous work, we introduced a workflow to detect potential structural inconsistencies by using a perturbed parameter ensemble (PPE) of the UK Earth System Model. The workflow revealed inter‑region and inter‑variable inconsistencies. For example, sulfate aerosol concentrations in different regions could not be consistently constrained, and constraint of aerosol optical depth degraded model performance for sulfate concentrations.Here, we extend that approach using a new PPE that includes targeted structural changes designed to address the identified deficiencies. We reapply the same observational constraints and test whether the consistency of constraints improves, and whether there are any remaining structural deficiencies. We also assess the connection to aerosol radiative forcing: whether constraints that previously led to opposing aerosol radiative forcing values now align, and whether that alignment leads to more consistent forcing (and less uncertain) values across observational constraints.This work demonstrates a practical path to directly target two interlinked causes of model uncertainty (parametric and structural): use model-observation inconsistencies to diagnose potential structural errors, implement targeted model developments, and iterate. The outcome is an evidence‑based development cycle that aims to make more observations usable simultaneously, reduce parametric and structural uncertainty, and ultimately contribute to reducing uncertainty in climate projections.
- Open Access
- 3 March 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-51
Comment on egusphere-2025-6166
This study presents results from an Intensive Measurement Period conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Although the roles of biogenic and anthropogenic precursors in ozone, secondary organic aerosol (SOA) formation and nanoparticle growth are recognized, their relative importance during extreme events remains poorly constrained. This work therefore aimed to quantify these interactions using coordinated measurements and model simulations. Measurements showed that oxygenated VOCs formed the largest fraction of total VOCs, followed by non-methane hydrocarbons (NMHCs) and aromatics, with substantial contributions from both anthropogenic and biogenic sources. Elevated ozone and SOA levels were driven by the combined influence of biogenic VOCs and NOx emissions under predominantly NOx-limited conditions. Isoprene, NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were the most important SOA precursors. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality, during extreme pollution episodes. These findings illustrate the complex interplay between meteorology, emissions, and atmospheric chemistry during heatwaves and emphasize the need for comprehensive precursor monitoring and improved modelling for effective air-quality management under future climate conditions.
- 3 March 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-51
Open AccessComment on egusphere-2025-6166
This study presents results from an Intensive Measurement Period conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Although the roles of biogenic and anthropogenic precursors in ozone, secondary organic aerosol (SOA) formation and nanoparticle growth are recognized, their relative importance during extreme events remains poorly constrained. This work therefore aimed to quantify these interactions using coordinated measurements and model simulations. Measurements showed that oxygenated VOCs formed the largest fraction of total VOCs, followed by non-methane hydrocarbons (NMHCs) and aromatics, with substantial contributions from both anthropogenic and biogenic sources. Elevated ozone and SOA levels were driven by the combined influence of biogenic VOCs and NOx emissions under predominantly NOx-limited conditions. Isoprene, NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were the most important SOA precursors. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality, during extreme pollution episodes. These findings illustrate the complex interplay between meteorology, emissions, and atmospheric chemistry during heatwaves and emphasize the need for comprehensive precursor monitoring and improved modelling for effective air-quality management under future climate conditions.
- Open Access
- 26 February 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-51
Comment on egusphere-2025-6166
This study presents results from an Intensive Measurement Period conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Although the roles of biogenic and anthropogenic precursors in ozone, secondary organic aerosol (SOA) formation and nanoparticle growth are recognized, their relative importance during extreme events remains poorly constrained. This work therefore aimed to quantify these interactions using coordinated measurements and model simulations. Measurements showed that oxygenated VOCs formed the largest fraction of total VOCs, followed by non-methane hydrocarbons (NMHCs) and aromatics, with substantial contributions from both anthropogenic and biogenic sources. Elevated ozone and SOA levels were driven by the combined influence of biogenic VOCs and NOx emissions under predominantly NOx-limited conditions. Isoprene, NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were the most important SOA precursors. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality, during extreme pollution episodes. These findings illustrate the complex interplay between meteorology, emissions, and atmospheric chemistry during heatwaves and emphasize the need for comprehensive precursor monitoring and improved modelling for effective air-quality management under future climate conditions.
- 26 February 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-51
Open AccessComment on egusphere-2025-6166
This study presents results from an Intensive Measurement Period conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Although the roles of biogenic and anthropogenic precursors in ozone, secondary organic aerosol (SOA) formation and nanoparticle growth are recognized, their relative importance during extreme events remains poorly constrained. This work therefore aimed to quantify these interactions using coordinated measurements and model simulations. Measurements showed that oxygenated VOCs formed the largest fraction of total VOCs, followed by non-methane hydrocarbons (NMHCs) and aromatics, with substantial contributions from both anthropogenic and biogenic sources. Elevated ozone and SOA levels were driven by the combined influence of biogenic VOCs and NOx emissions under predominantly NOx-limited conditions. Isoprene, NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were the most important SOA precursors. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality, during extreme pollution episodes. These findings illustrate the complex interplay between meteorology, emissions, and atmospheric chemistry during heatwaves and emphasize the need for comprehensive precursor monitoring and improved modelling for effective air-quality management under future climate conditions.
- Open Access
- 25 February 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-51
Comment on egusphere-2025-6166
This study presents results from an Intensive Measurement Period conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Although the roles of biogenic and anthropogenic precursors in ozone, secondary organic aerosol (SOA) formation and nanoparticle growth are recognized, their relative importance during extreme events remains poorly constrained. This work therefore aimed to quantify these interactions using coordinated measurements and model simulations. Measurements showed that oxygenated VOCs formed the largest fraction of total VOCs, followed by non-methane hydrocarbons (NMHCs) and aromatics, with substantial contributions from both anthropogenic and biogenic sources. Elevated ozone and SOA levels were driven by the combined influence of biogenic VOCs and NOx emissions under predominantly NOx-limited conditions. Isoprene, NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were the most important SOA precursors. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality, during extreme pollution episodes. These findings illustrate the complex interplay between meteorology, emissions, and atmospheric chemistry during heatwaves and emphasize the need for comprehensive precursor monitoring and improved modelling for effective air-quality management under future climate conditions.
- 25 February 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-51
Open AccessComment on egusphere-2025-6166
This study presents results from an Intensive Measurement Period conducted during the European heatwave of July 2022, focusing on ozone, volatile organic compounds (VOCs), and carbonaceous aerosols at 31 sites across Europe. The episode featured persistent high-pressure systems, record-breaking temperatures, widespread ozone exceedances and concurrent atmospheric new particle formation and growth events. Although the roles of biogenic and anthropogenic precursors in ozone, secondary organic aerosol (SOA) formation and nanoparticle growth are recognized, their relative importance during extreme events remains poorly constrained. This work therefore aimed to quantify these interactions using coordinated measurements and model simulations. Measurements showed that oxygenated VOCs formed the largest fraction of total VOCs, followed by non-methane hydrocarbons (NMHCs) and aromatics, with substantial contributions from both anthropogenic and biogenic sources. Elevated ozone and SOA levels were driven by the combined influence of biogenic VOCs and NOx emissions under predominantly NOx-limited conditions. Isoprene, NMHCs, and O-VOCs dominated the ozone formation potential, while aromatics and monoterpenes were the most important SOA precursors. Model simulations indicated that higher NOx concentrations can reduce SOA formation by about 10 %. The campaign also highlighted observational gaps underscoring the need for broader and higher-resolution VOC monitoring across Europe. Overall, further reductions in NOx emissions, alongside targeted control of key anthropogenic VOCs, would benefit air quality, during extreme pollution episodes. These findings illustrate the complex interplay between meteorology, emissions, and atmospheric chemistry during heatwaves and emphasize the need for comprehensive precursor monitoring and improved modelling for effective air-quality management under future climate conditions.