C. Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
C. Lee has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
- Seong Man Choi
Aerospace Engineering Department, Jeonbuk National University, Korea
2 shared publications
Latest Publications
- 6 February 2025
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 129 (1336) , 1579-1600
A study on the mixing and infrared signal characteristics of a lobed mixer in a micro turbojet engine
In this study, measurements and numerical analyses of the temperature distribution of exhaust gas passing through two types of mixers using a micro turbojet engine were performed to investigate the flow mixing performance based on the shape of the mixer, which mixes the bypass air and core air in a gas turbine turbofan engine. To study the mixing characteristics of the mixer, compressed air was supplied through an external duct mounted on a micro turbojet engine to simulate bypass flow, and a system in which hot gas and compressed air were mixed and ejected into the atmosphere was fabricated. A confluent-type mixer and a mixer with 8-lobed mixer channels in the form of a sine wave were used for the experiment. The exhaust gas temperature was measured based on the distance from the nozzle outlet at bypass ratios of 0.5, 1.0 and 1.4. The results showed that the lobed mixer is more effective than the confluent mixer in lowering the exhaust gas temperature as the bypass ratio increased. Numerical analysis results indicated that, in the case of the confluent mixer, flow mixing is primarily performed by shear flow owing to the velocity difference between the core gas and the bypass air. In contrast, in the case of a lobed mixer, flow mixing is achieved through rotational motion and transverse flow. In addition, when the number of lobe channels increased from 8 to 12, the rotational motion increased and the mixing performance improved. Furthermore, infrared signal calculation results confirmed that, as the number of lobe channels increased, improved flow mixing effectively reduced the infrared signal. We conclude that this study helps understand the mixing characteristics of the flow according to the shape of the mixer at various bypass ratios and determine their effect on the characteristics of the infrared signal.
- 6 February 2025
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 129 (1336) , 1579-1600
A study on the mixing and infrared signal characteristics of a lobed mixer in a micro turbojet engine
In this study, measurements and numerical analyses of the temperature distribution of exhaust gas passing through two types of mixers using a micro turbojet engine were performed to investigate the flow mixing performance based on the shape of the mixer, which mixes the bypass air and core air in a gas turbine turbofan engine. To study the mixing characteristics of the mixer, compressed air was supplied through an external duct mounted on a micro turbojet engine to simulate bypass flow, and a system in which hot gas and compressed air were mixed and ejected into the atmosphere was fabricated. A confluent-type mixer and a mixer with 8-lobed mixer channels in the form of a sine wave were used for the experiment. The exhaust gas temperature was measured based on the distance from the nozzle outlet at bypass ratios of 0.5, 1.0 and 1.4. The results showed that the lobed mixer is more effective than the confluent mixer in lowering the exhaust gas temperature as the bypass ratio increased. Numerical analysis results indicated that, in the case of the confluent mixer, flow mixing is primarily performed by shear flow owing to the velocity difference between the core gas and the bypass air. In contrast, in the case of a lobed mixer, flow mixing is achieved through rotational motion and transverse flow. In addition, when the number of lobe channels increased from 8 to 12, the rotational motion increased and the mixing performance improved. Furthermore, infrared signal calculation results confirmed that, as the number of lobe channels increased, improved flow mixing effectively reduced the infrared signal. We conclude that this study helps understand the mixing characteristics of the flow according to the shape of the mixer at various bypass ratios and determine their effect on the characteristics of the infrared signal.
- 24 January 2024
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 128 (1322) , 685-705
Plume flow characteristics of rectangular exhaust nozzles in a micro-jet engine
The flow characteristics of the plume ejected from a micro-jet engine’s rectangular exhaust nozzle have been studied by conducting experimental and numerical analyses. The radiated infrared signature of a plume ejected from a rectangular exhaust nozzle with a large aspect ratio in a jet propulsion engine is known to be significantly lower than that of a plume ejected from a circular exhaust nozzle. The velocity and temperature distributions, which are the flow characteristics of the jet, were measured to investigate this phenomenon. For this purpose, we installed a circular nozzle and a rectangular exhaust nozzle with an aspect ratio of five to a micro-jet engine. The results showed that the plume spreads wider as it moves away from the nozzle exit and that the velocity rapidly decreases in the case of the rectangular nozzle, contrary to the case of the circular nozzle. Similar tendencies were observed for the temperature distribution and magnitude of the ejected plume. Thus, we concluded that the flow distribution caused by the nozzle shape induces a greater drop in the radiated infrared signature of the plume ejected from the rectangular nozzle than the circular nozzle. Flow analysis was conducted to evaluate the flow in and outside the exhaust nozzle; results similar to those of the experiment were obtained. These results show that the ejecting jet has a greater mixing effect on the air outside when using the rectangular nozzle than the circular nozzle.
- 24 January 2024
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 128 (1322) , 685-705
Plume flow characteristics of rectangular exhaust nozzles in a micro-jet engine
The flow characteristics of the plume ejected from a micro-jet engine’s rectangular exhaust nozzle have been studied by conducting experimental and numerical analyses. The radiated infrared signature of a plume ejected from a rectangular exhaust nozzle with a large aspect ratio in a jet propulsion engine is known to be significantly lower than that of a plume ejected from a circular exhaust nozzle. The velocity and temperature distributions, which are the flow characteristics of the jet, were measured to investigate this phenomenon. For this purpose, we installed a circular nozzle and a rectangular exhaust nozzle with an aspect ratio of five to a micro-jet engine. The results showed that the plume spreads wider as it moves away from the nozzle exit and that the velocity rapidly decreases in the case of the rectangular nozzle, contrary to the case of the circular nozzle. Similar tendencies were observed for the temperature distribution and magnitude of the ejected plume. Thus, we concluded that the flow distribution caused by the nozzle shape induces a greater drop in the radiated infrared signature of the plume ejected from the rectangular nozzle than the circular nozzle. Flow analysis was conducted to evaluate the flow in and outside the exhaust nozzle; results similar to those of the experiment were obtained. These results show that the ejecting jet has a greater mixing effect on the air outside when using the rectangular nozzle than the circular nozzle.