Anatoly I. Prostomolotov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Anatoly I. Prostomolotov has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Nataliya A. Verezub
Ishlinsky Institute for Problems in Mechanics RAS, Moscow, Russia
4 shared publications N.A. Verezub
Ishlinsky Institute for Problems in Mechanis
1 shared publication
Latest Publications
- 1 January 2025
- Published by Cifra Ltd - Russian Agency for Digital Standardization (RADS)
Mechanics of crystalline materials production processes
The monograph summarizes the results of mathematical and physical modeling of mechanical processes in the production of crystalline materials using a number of technologically significant industrial processes (growth of technically valuable single crystals from melt for microelectronics and from salt solutions for photonics, thermal pressing, and crystallization from powders for thermoelectric materials). Data are presented on the effect of the main control actions on the hydromechanics of liquid phase (melt and salt solution), including control of the rotation of the crystal, the crucible, and various mixer types, sectional thermal heating of the crucible walls, complex crystallizer designs, the use of magnetic fields, and microgravity conditions. Approaches are discussed that ensure the optimization of hot zone design and process parameters and control of heat and mass transfer processes in the liquid and solid phases, including control of the stress state and defect formation processes in the solid phase. Software packages for mathematical modeling, including those with the possibility of remote operation, are discussed. The monograph is intended for specialists in the field of crystalline materials technologies, mechanics, thermal physics, as well as for postgraduate students and students of relevant specialties.
- 1 January 2025
- Published by Cifra Ltd - Russian Agency for Digital Standardization (RADS)
Mechanics of crystalline materials production processes
The monograph summarizes the results of mathematical and physical modeling of mechanical processes in the production of crystalline materials using a number of technologically significant industrial processes (growth of technically valuable single crystals from melt for microelectronics and from salt solutions for photonics, thermal pressing, and crystallization from powders for thermoelectric materials). Data are presented on the effect of the main control actions on the hydromechanics of liquid phase (melt and salt solution), including control of the rotation of the crystal, the crucible, and various mixer types, sectional thermal heating of the crucible walls, complex crystallizer designs, the use of magnetic fields, and microgravity conditions. Approaches are discussed that ensure the optimization of hot zone design and process parameters and control of heat and mass transfer processes in the liquid and solid phases, including control of the stress state and defect formation processes in the solid phase. Software packages for mathematical modeling, including those with the possibility of remote operation, are discussed. The monograph is intended for specialists in the field of crystalline materials technologies, mechanics, thermal physics, as well as for postgraduate students and students of relevant specialties.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Russian Microelectronics
- Vol. 53 (8) , 803-809
Simulation of MHD-Influence on Silicon Melt Flow in the Czochralski Process
The applications of a rotating magnetic field (RMF) in semiconductor crystals’ growth technology from a melt by the Czochralski method (CzM) are discussed, including the use of the known data of physical modeling of electrically conductive KOH solution flows in a cylindrical crucible under RMF to verify the results of this work. A mathematical model of hydrodynamic processes is considered in relation to silicon single crystal growth with a diameter of 100 mm on a Redmet-30 furnace equipped with an RMF magnet. The test results of the calculated azimuth velocity profile with the measured data in KOH solution are presented. The results of parametric studies of the stability of melt flows depending on the frequency and magnitude of RMF induction are summarized in a stability diagram.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Russian Microelectronics
- Vol. 53 (8) , 803-809
Simulation of MHD-Influence on Silicon Melt Flow in the Czochralski Process
The applications of a rotating magnetic field (RMF) in semiconductor crystals’ growth technology from a melt by the Czochralski method (CzM) are discussed, including the use of the known data of physical modeling of electrically conductive KOH solution flows in a cylindrical crucible under RMF to verify the results of this work. A mathematical model of hydrodynamic processes is considered in relation to silicon single crystal growth with a diameter of 100 mm on a Redmet-30 furnace equipped with an RMF magnet. The test results of the calculated azimuth velocity profile with the measured data in KOH solution are presented. The results of parametric studies of the stability of melt flows depending on the frequency and magnitude of RMF induction are summarized in a stability diagram.
- Open Access
- 14 October 2024
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 10 (3) , 185-193
Growth chamber gas dynamics in Cz silicon single crystal growth process
Mathematical simulation results for inert gas (argon) dynamics in the rarefied atmosphere of Redmet-10 Cz single crystal silicon growth furnace chamber have been reported. Gas flows in cold (room temperature) and hot (growth process) chambers have been analyzed. Convective gas flows have been considered for two growth chamber gas supply options: basic supply, i.e., through the top central inlet hole only, and combined, i.e., with additional gas supply through the lateral inlet hole. Gas outlet is through the growth chamber bottom outlet hole for both options. For the cold chamber option, forced convection has been studied using the incompressible ideal gas model. For hot chamber, both the nonisothermal compressible ideal gas model and the weakly compressible gas model in the Boussinesq approximation have been used for studying the vortex structure produced by a joint action of forced and thermal-gravitational convection. The effect of different gas inlet methods on the convective transport of silicon monoxide evaporating from the free melt surface has been discussed.
- 14 October 2024
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 10 (3) , 185-193
Open AccessGrowth chamber gas dynamics in Cz silicon single crystal growth process
Mathematical simulation results for inert gas (argon) dynamics in the rarefied atmosphere of Redmet-10 Cz single crystal silicon growth furnace chamber have been reported. Gas flows in cold (room temperature) and hot (growth process) chambers have been analyzed. Convective gas flows have been considered for two growth chamber gas supply options: basic supply, i.e., through the top central inlet hole only, and combined, i.e., with additional gas supply through the lateral inlet hole. Gas outlet is through the growth chamber bottom outlet hole for both options. For the cold chamber option, forced convection has been studied using the incompressible ideal gas model. For hot chamber, both the nonisothermal compressible ideal gas model and the weakly compressible gas model in the Boussinesq approximation have been used for studying the vortex structure produced by a joint action of forced and thermal-gravitational convection. The effect of different gas inlet methods on the convective transport of silicon monoxide evaporating from the free melt surface has been discussed.
- Open Access
- 25 July 2024
- Published by National University of Science and Technology MISiS in Materials of Electronics Engineering
- Vol. 27 (2) , 132-139
Simulation of MHD-influence on silicon melt flow in Czochralski process
The applications of rotating magnetic field (RMF) in semiconductor crystals growth technology from a melt by Czochralski method (Cz) are discussed, including the known data of physical modeling of an electrically conductive KOH solution flows in a cylindrical crucible under RMF are considered and verified. Mathematical model of hydrodynamic processes is considered in relation to silicon single crystal growth in 100 mm diameter on Redmet-30 furnace equipped by RMF-magnet. The test results of calculated azimuth velocity profile with the measured data in KOH solution are presented. The results of parametric studies of melt flows stability in depending on the frequency and magnitude of RMF induction are summarized in the stability diagram.
- 25 July 2024
- Published by National University of Science and Technology MISiS in Materials of Electronics Engineering
- Vol. 27 (2) , 132-139
Open AccessSimulation of MHD-influence on silicon melt flow in Czochralski process
The applications of rotating magnetic field (RMF) in semiconductor crystals growth technology from a melt by Czochralski method (Cz) are discussed, including the known data of physical modeling of an electrically conductive KOH solution flows in a cylindrical crucible under RMF are considered and verified. Mathematical model of hydrodynamic processes is considered in relation to silicon single crystal growth in 100 mm diameter on Redmet-30 furnace equipped by RMF-magnet. The test results of calculated azimuth velocity profile with the measured data in KOH solution are presented. The results of parametric studies of melt flows stability in depending on the frequency and magnitude of RMF induction are summarized in the stability diagram.
- 1 January 2023
- Published by Cifra Ltd - Russian Agency for Digital Standardization (RADS)
Механика процессов получения кристаллических материалов
В монографии обобщены результаты математического и физического моделирования процессов механики при получении кристаллических материалов рядом технологически значимых промышленных технологий (выращивание технически ценных монокристаллов из расплава для микроэлектроники и из солевых растворов для фотоники, термическое прессование и кристаллизация из порошков для получения термоэлектрических материалов). Приводятся результаты исследования влияния основных управляющих воздействий на гидромеханику жидкой фазы (расплава и солевого раствора), включая управление вращением кристалла, тигля и различного рода мешалок, тепловой секционный нагрев стенок тигля, сложные конструкции кристаллизатора, применение магнитных полей и условия микрогравитации. Рассмотрены пути, обеспечивающие оптимизацию конструкций тепловых узлов и технологических параметров, управлеёние процессами переноса тепла и массы в жидкой и твердой фазах, включая управление напряженным состоянием и процессами дефектообразования в твердой фазе. Рассматриваются программные комплексы для математического моделирования, в том числе с возможностью дистанционной работы. Монография предназначена для специалистов в области технологий получения кристаллических материалов, механики, теплофизики, а также аспирантов и студентов соответствующих специальностей.
- 1 January 2023
- Published by Cifra Ltd - Russian Agency for Digital Standardization (RADS)
Механика процессов получения кристаллических материалов
В монографии обобщены результаты математического и физического моделирования процессов механики при получении кристаллических материалов рядом технологически значимых промышленных технологий (выращивание технически ценных монокристаллов из расплава для микроэлектроники и из солевых растворов для фотоники, термическое прессование и кристаллизация из порошков для получения термоэлектрических материалов). Приводятся результаты исследования влияния основных управляющих воздействий на гидромеханику жидкой фазы (расплава и солевого раствора), включая управление вращением кристалла, тигля и различного рода мешалок, тепловой секционный нагрев стенок тигля, сложные конструкции кристаллизатора, применение магнитных полей и условия микрогравитации. Рассмотрены пути, обеспечивающие оптимизацию конструкций тепловых узлов и технологических параметров, управлеёние процессами переноса тепла и массы в жидкой и твердой фазах, включая управление напряженным состоянием и процессами дефектообразования в твердой фазе. Рассматриваются программные комплексы для математического моделирования, в том числе с возможностью дистанционной работы. Монография предназначена для специалистов в области технологий получения кристаллических материалов, механики, теплофизики, а также аспирантов и студентов соответствующих специальностей.