Germain Bourcier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Germain Bourcier has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Julien Lumeau
Aix Marseille University, CNRS, Centrale Med, Institut Fresnelhttps://ror.org/03br1wy20, 13013 Marseille, France
6 shared publications - Olivier Llopis
LAAS-CNRS
6 shared publications - Arnaud Mussot
Université de Lille
5 shared publications Antonin Moreau
CNRS, Centrale Med, Institut Fresnel, Aix Marseille Univ, Marseille, France
4 shared publications- Matteo Conforti
University of Lille
4 shared publications - Thomas Bunel
University of Lille
4 shared publications
Latest Publications
- 5 May 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Optical frequency combs in high-Q fiber Fabry-Perot resonators for low phase noise optical and microwave generation
Peignes de fréquences optiques dans des résonateurs Fabry-Pérot fibrés à haut facteur de qualité pour la génération optique et micro-onde de faible bruit de phase: Ce projet de thèse est consacré au résonateur Fabry-Perot fibré, conçu comme une plateforme compacte et polyvalente pour la génération de peignes de fréquences optiques. Le dispositif consiste en une courte section de fibre optique terminée par deux connecteurs FC/PC, chacun revêtu de miroirs diélectriques à haute réflectivité (>99,8%). Cette configuration assure un bon confinement de la lumière et de faibles pertes intra-cavité, offrant un cadre favorable à l'exploration de phénomènes optiques linéaires et non-linéaires. L'objectif principal est la génération de peignes de fréquences optiques, ensemble de raies fines et équi-espacées dans le domaine fréquentiel, correspondant à un train d'impulsions dans le domaine temporel. Ces sources sont devenues essentielles en photonique moderne, avec des applications allant de la métrologie de haute précision à la spectroscopie et aux télécommunications. Pour atteindre cet objectif, nous exploitons des effets non linéaires, en particulier l'effet Kerr optique, avec un pompage en régime continu à 1550 nm. Cette approche est similaire aux techniques mises en œuvre dans les microrésonateurs intégrés ou les cavités fibrées en anneau. Dans un premier temps, nous étudions le résonateur, de sa conception et fabrication à ses capacités de stockage en régime linéaire afin d'optimiser finesse et facteur de qualité. À puissance de pompe plus élevée, nous mettons en évidence une dynamique non-linéaire. Des instabilités de modulation apparaissent, donnant naissance au peigne primaire, puis à des solitons de cavité, ondes localisées se propageant de manière stable dans la cavité. Ces régimes nécessitent un contrôle précis du désaccord en fréquence. Pour garantir cette stabilité, un verrouillage actif du laser sur la cavité via la technique Pound-Drever-Hall est mis en œuvre. Dans ce travail nous mettons en évidence d'autres phénomènes liés à différentes valeurs de dispersion ou encore aux effets Brillouin et Raman. Enfin, une autre méthode de stabilisation, le verrouillage par auto-injection, est étudiée. Le signal filtré par le résonateur est réinjecté dans la source laser, réduisant son bruit de phase d'environ 40 dBc/Hz. Dans ces conditions, les solitons présentent une excellente cohérence, avec un bruit de phase inférieur à -80 dBc/Hz à 10 Hz de la porteuse. Ces travaux démontrent qu'un résonateur Fabry-Perot fibré constitue une solution simple et performante pour la génération stable de peignes de fréquences optiques.
- 5 May 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Optical frequency combs in high-Q fiber Fabry-Perot resonators for low phase noise optical and microwave generation
Peignes de fréquences optiques dans des résonateurs Fabry-Pérot fibrés à haut facteur de qualité pour la génération optique et micro-onde de faible bruit de phase: Ce projet de thèse est consacré au résonateur Fabry-Perot fibré, conçu comme une plateforme compacte et polyvalente pour la génération de peignes de fréquences optiques. Le dispositif consiste en une courte section de fibre optique terminée par deux connecteurs FC/PC, chacun revêtu de miroirs diélectriques à haute réflectivité (>99,8%). Cette configuration assure un bon confinement de la lumière et de faibles pertes intra-cavité, offrant un cadre favorable à l'exploration de phénomènes optiques linéaires et non-linéaires. L'objectif principal est la génération de peignes de fréquences optiques, ensemble de raies fines et équi-espacées dans le domaine fréquentiel, correspondant à un train d'impulsions dans le domaine temporel. Ces sources sont devenues essentielles en photonique moderne, avec des applications allant de la métrologie de haute précision à la spectroscopie et aux télécommunications. Pour atteindre cet objectif, nous exploitons des effets non linéaires, en particulier l'effet Kerr optique, avec un pompage en régime continu à 1550 nm. Cette approche est similaire aux techniques mises en œuvre dans les microrésonateurs intégrés ou les cavités fibrées en anneau. Dans un premier temps, nous étudions le résonateur, de sa conception et fabrication à ses capacités de stockage en régime linéaire afin d'optimiser finesse et facteur de qualité. À puissance de pompe plus élevée, nous mettons en évidence une dynamique non-linéaire. Des instabilités de modulation apparaissent, donnant naissance au peigne primaire, puis à des solitons de cavité, ondes localisées se propageant de manière stable dans la cavité. Ces régimes nécessitent un contrôle précis du désaccord en fréquence. Pour garantir cette stabilité, un verrouillage actif du laser sur la cavité via la technique Pound-Drever-Hall est mis en œuvre. Dans ce travail nous mettons en évidence d'autres phénomènes liés à différentes valeurs de dispersion ou encore aux effets Brillouin et Raman. Enfin, une autre méthode de stabilisation, le verrouillage par auto-injection, est étudiée. Le signal filtré par le résonateur est réinjecté dans la source laser, réduisant son bruit de phase d'environ 40 dBc/Hz. Dans ces conditions, les solitons présentent une excellente cohérence, avec un bruit de phase inférieur à -80 dBc/Hz à 10 Hz de la porteuse. Ces travaux démontrent qu'un résonateur Fabry-Perot fibré constitue une solution simple et performante pour la génération stable de peignes de fréquences optiques.
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (1) , 201-207
Laser Self-Injection Locking to Fiber Fabry-Perot Resonator for Frequency Comb Generation
This study demonstrates that self-injection locking (SIL) of a distributed feedback (DFB) laser to a high-Q fiber Fabry Perot (FFP) resonator, fabricated with highly nonlinear fiber, allows optical frequency combs (OFC) generation with a laser power as low as 100 mW. More precisely, cavity soliton (CS) regime has been observed in this configuration, along with other types of combs. The laser stabilization using SIL is described. Then the system’s behavior is analyzed through modeling the laser’s dynamics and comparing the model results to experimental tuning curve measurements. Our findings highlight the critical role of the initial phase of the fiber link between laser and FFP in determining the stability and effectiveness of the locking process. We explore the dynamics of the nonlinear SIL process while varying the laser current, revealing the transition from modulation instability to chaotic comb states, and eventually to soliton formation as the system moves from an effective blue-detuned to an effective red-detuned regime. Notably, the inclusion of self-phase modulation (SPM) in the SIL model predicts accessibility of the narrow soliton existence range. These results highlight the potential of SIL in FFP resonators for low-power, stable OFC generation, offering a promising path forward for practical applications.
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (1) , 201-207
Laser Self-Injection Locking to Fiber Fabry-Perot Resonator for Frequency Comb Generation
This study demonstrates that self-injection locking (SIL) of a distributed feedback (DFB) laser to a high-Q fiber Fabry Perot (FFP) resonator, fabricated with highly nonlinear fiber, allows optical frequency combs (OFC) generation with a laser power as low as 100 mW. More precisely, cavity soliton (CS) regime has been observed in this configuration, along with other types of combs. The laser stabilization using SIL is described. Then the system’s behavior is analyzed through modeling the laser’s dynamics and comparing the model results to experimental tuning curve measurements. Our findings highlight the critical role of the initial phase of the fiber link between laser and FFP in determining the stability and effectiveness of the locking process. We explore the dynamics of the nonlinear SIL process while varying the laser current, revealing the transition from modulation instability to chaotic comb states, and eventually to soliton formation as the system moves from an effective blue-detuned to an effective red-detuned regime. Notably, the inclusion of self-phase modulation (SPM) in the SIL model predicts accessibility of the narrow soliton existence range. These results highlight the potential of SIL in FFP resonators for low-power, stable OFC generation, offering a promising path forward for practical applications.
- 2 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (18) , 5566-5569
Investigation of intrinsic properties of high-quality fiber Fabry–Perot resonators
Fiber Fabry–Perot (FFP) resonators of a few centimeters are optimized as a function of the reflectivity of the mirrors and the dimensions of the intra-cavity waveguide. Loaded quality factor in excess of 109, with an optimum of ~4 × 109, together with an intrinsic quality factor larger than 1010 and intrinsic finesse in the range of 105 have been measured. An application to the stabilization of laser frequency fluctuations is presented.
- 2 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (18) , 5566-5569
Investigation of intrinsic properties of high-quality fiber Fabry–Perot resonators
Fiber Fabry–Perot (FFP) resonators of a few centimeters are optimized as a function of the reflectivity of the mirrors and the dimensions of the intra-cavity waveguide. Loaded quality factor in excess of 109, with an optimum of ~4 × 109, together with an intrinsic quality factor larger than 1010 and intrinsic finesse in the range of 105 have been measured. An application to the stabilization of laser frequency fluctuations is presented.
- Open Access
- 3 June 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-8
Brillouin-induced Kerr frequency comb in normal dispersion fiber Fabry Perot resonators
We report the generation of a stable, broadband frequency comb, covering more than 10 THz, using a dispersion fiber Fabry-Perot resonator with a high quality factor of 69 millions. This platform ensures robust and easy integration into photonic devices via FC/PC connectors, and feature quality factors comparable to those of microresonators. We demonstrate a passive mode-locking phenomenon induced by the coherent interaction of the Kerr effect and Brillouin scattering, which generates a frequency comb with a repetition rate exceeding the free spectral range of the cavity. This parametric process modulates the continuous wave (CW) pump and can then be transformed into a train of almost square-wave pulses thanks to the generation of switching waves. Our results are supported by advanced numerical simulations, and theoretical derivations that include the Brillouin effect in the Fabry-Perot configuration. The very high stable feature of this optical frequency comb lying in the GHz range is critical to several applications ranging from telecommunication, spectroscopy and advanced microwave generation.
- 3 June 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-8
Open AccessBrillouin-induced Kerr frequency comb in normal dispersion fiber Fabry Perot resonators
We report the generation of a stable, broadband frequency comb, covering more than 10 THz, using a dispersion fiber Fabry-Perot resonator with a high quality factor of 69 millions. This platform ensures robust and easy integration into photonic devices via FC/PC connectors, and feature quality factors comparable to those of microresonators. We demonstrate a passive mode-locking phenomenon induced by the coherent interaction of the Kerr effect and Brillouin scattering, which generates a frequency comb with a repetition rate exceeding the free spectral range of the cavity. This parametric process modulates the continuous wave (CW) pump and can then be transformed into a train of almost square-wave pulses thanks to the generation of switching waves. Our results are supported by advanced numerical simulations, and theoretical derivations that include the Brillouin effect in the Fabry-Perot configuration. The very high stable feature of this optical frequency comb lying in the GHz range is critical to several applications ranging from telecommunication, spectroscopy and advanced microwave generation.
- 30 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 3214-3217
Optimization of a fiber Fabry–Perot resonator for low-threshold modulation instability Kerr frequency combs
We report a theoretical and experimental investigation of fiber Fabry–Perot cavities aimed at enhancing Kerr frequency comb generation. The modulation instability (MI) power threshold is derived from the linear stability analysis of a generalized Lugiato–Lefever equation. By combining this analysis with the concepts of power enhancement factor (PEF) and optimal coupling, we predict the ideal manufacturing parameters of fiber Fabry–Perot (FFP) cavities for the MI Kerr frequency comb generation. Our findings reveal a distinction between the optimal coupling for modulation instability and that of the cold cavity. Consequently, mirror reflectivity must be adjusted to suit the specific application. We verified the predictions of our theory by measuring the MI power threshold as a function of detuning for three different cavities.
- 30 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 3214-3217
Optimization of a fiber Fabry–Perot resonator for low-threshold modulation instability Kerr frequency combs
We report a theoretical and experimental investigation of fiber Fabry–Perot cavities aimed at enhancing Kerr frequency comb generation. The modulation instability (MI) power threshold is derived from the linear stability analysis of a generalized Lugiato–Lefever equation. By combining this analysis with the concepts of power enhancement factor (PEF) and optimal coupling, we predict the ideal manufacturing parameters of fiber Fabry–Perot (FFP) cavities for the MI Kerr frequency comb generation. Our findings reveal a distinction between the optimal coupling for modulation instability and that of the cold cavity. Consequently, mirror reflectivity must be adjusted to suit the specific application. We verified the predictions of our theory by measuring the MI power threshold as a function of detuning for three different cavities.
- 4 April 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (8) , 1933-1936
Low phase noise self-injection-locked diode laser with a high-Q fiber resonator: model and experiment
Low phase noise and narrow linewidth lasers are achieved by implementing self-injection locking of a DFB laser on two distinct fiber Fabry–Perot resonators. More than 45 dB improvement of the laser phase or frequency noise is observed when the laser is locked. In both cases, a frequency noise floor below 1 Hz2/Hz is measured. The integrated linewidth of the best of the two lasers is computed to be in the range of 400 Hz and appears to be dominated by vibration noise close to the carrier. The results are then compared with a model based on the retro-injected power and the Q factors ratio between the DFB laser and the resonator. This straightforward model facilitates the extraction of the theoretical performance of these sources close to the carrier, a characteristic still hidden by vibration noise.
- 4 April 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (8) , 1933-1936
Low phase noise self-injection-locked diode laser with a high-Q fiber resonator: model and experiment
Low phase noise and narrow linewidth lasers are achieved by implementing self-injection locking of a DFB laser on two distinct fiber Fabry–Perot resonators. More than 45 dB improvement of the laser phase or frequency noise is observed when the laser is locked. In both cases, a frequency noise floor below 1 Hz2/Hz is measured. The integrated linewidth of the best of the two lasers is computed to be in the range of 400 Hz and appears to be dominated by vibration noise close to the carrier. The results are then compared with a model based on the retro-injected power and the Q factors ratio between the DFB laser and the resonator. This straightforward model facilitates the extraction of the theoretical performance of these sources close to the carrier, a characteristic still hidden by vibration noise.
- Open Access
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
28 THz soliton frequency comb in a continuous-wave pumped fiber Fabry–Pérot resonator
We report the generation of an optical frequency comb featuring a 28 THz bandwidth, sustained by a single 80 fs cavity soliton recirculating in a fiber Fabry–Pérot resonator. This large spectrum is comparable to frequency combs obtained with microresonators operating in the anomalous dispersion regime. Thanks to the compact design and the easy coupling of the resonator, cavity solitons can be generated in an all-fiber experimental setup with a continuous wave pumping scheme. We also observe the generation of a dispersive wave at higher frequencies, which is supported by higher-order dispersion. These observations align remarkably well with both numerical simulations and the established theory of cavity solitons.
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Open Access28 THz soliton frequency comb in a continuous-wave pumped fiber Fabry–Pérot resonator
We report the generation of an optical frequency comb featuring a 28 THz bandwidth, sustained by a single 80 fs cavity soliton recirculating in a fiber Fabry–Pérot resonator. This large spectrum is comparable to frequency combs obtained with microresonators operating in the anomalous dispersion regime. Thanks to the compact design and the easy coupling of the resonator, cavity solitons can be generated in an all-fiber experimental setup with a continuous wave pumping scheme. We also observe the generation of a dispersive wave at higher frequencies, which is supported by higher-order dispersion. These observations align remarkably well with both numerical simulations and the established theory of cavity solitons.