EGEldar Golubev

Eldar Golubev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eldar Golubev has a total of 7 co-authors. Here are the top co-authors by number of shared publications:

  • Andrey Abramov

    Department of Chemical and Pharmaceutical Engineering, Mendeleev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow, Russia

    5 shared publications
  • Natalia Menshutina

    The Department of Chemical and Pharmaceutical Engineering, Mendeleev University of Chemical Technology of Russia (MUCTR), Moscow 125047, Russia

    5 shared publications
  • Pavel Tsygankov

    Department of Chemical and Pharmaceutical Engineering, Mendeleev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow, Russia

    5 shared publications
  • Olga Fedotova

    Department of Chemical and Pharmaceutical Engineering, Mendeleev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow, Russia

    2 shared publications
  • Yan Sulkhanov

    Department of Chemical and Pharmaceutical Engineering, Mendeleev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow, Russia

    2 shared publications
  • A. E. Lebedev

    Department of Chemical and Pharmaceutical Engineering of Mendeleev University of Chemical Technology of Russia, Moscow, Russia

    1 shared publication

Latest Publications

  • Open Access

    CO2-Induced Foaming and Gelation for the Fabrication of Macroporous Alginate Aerogel Scaffolds

    by Natalia Menshutina, Eldar Golubev, Andrey Abramov, Pavel Tsygankov

    Alginate aerogels are attractive candidates for biomedical scaffolds because they combine high mesoporosity with biocompatibility and can be processed into open, interconnected macroporous networks suitable for tissue engineering. Here, we systematically investigate how CO2-induced foaming parameters govern the hierarchical pore structure of alginate aerogels produced by subsequent supercritical CO2 drying. Sodium alginate–CaCO3 suspensions are foamed in a CO2 atmosphere at 50 or 100 bar, depressurization rates of 50 or 0.05 bar·s−1, temperatures of 5 or 25 °C, and, optionally, under pulsed pressure or with Pluronic F-68 as a surfactant. The resulting gels are dried using supercritical CO2 and characterized by micro-computed tomography and N2 sorption. High pressure combined with slow depressurization (100 bar, 0.05 bar·s−1) yields a homogeneous macroporous network with pores predominantly in the 200–500 µm range and a mesoporous texture with 15–35 nm pores, whereas fast depressurization promotes bubble coalescence and the appearance of large (>2100 µm) macropores and a broader mesopore distribution. Lowering the temperature, applying pulsed pressure, and adding surfactant enable further tuning of macropore size and connectivity with a limited impact on mesoporosity. Interpretation in terms of Peclet and Deborah numbers links processing conditions to non-equilibrium mass transfer and gel viscoelasticity, providing a physically grounded map for designing hierarchically porous alginate aerogel scaffolds for biomedical applications.


  • Open Access

    Three-Dimensional Printing and Supercritical Technologies for the Fabrication of Intricately Structured Aerogels Derived from the Alginate–Chitosan Polyelectrolyte Complex

    by Natalia Menshutina, Andrey Abramov, Eldar Golubev, Pavel Tsygankov

    Patient-specific scaffolds for tissue and organ regeneration are still limited by the difficulty of simultaneously shaping complex geometries, preserving hierarchical porosity, and guaranteeing sterility. Additive technologies represent a promising approach for addressing problems in tissue engineering, with the potential to develop personalized matrices for the growth of tissue and organ cells. The utilization of supercritical technologies, encompassing the processes of drying and sterilization within a supercritical fluid environment, has demonstrated significant opportunities for obtaining highly effective matrices for cell growth based on biocompatible materials. We present a comprehensive methodology for fabricating intricately structured, sterile aerogels based on alginate–chitosan polyelectrolyte complexes. The target three-dimensional macrostructure is achieved through (i) direct ink writing or (ii) heterophase printing, enabling the deposition of inks with diverse rheological profiles (viscosities ranging from 0.8 to 2500 Pa·s). A coupled supercritical carbon dioxide drying–sterilization regimen at 120 bar and 40 °C is employed to preserve the highly porous architecture of the printed constructs. The resulting aerogels exhibit 96 ± 2% porosity, a BET surface area of 108–238 m2 g−1, and complete sterility. The proposed integration of 3D printing and supercritical processing yields sterile, intricately structured aerogels with substantial potential for the fabrication of patient-specific scaffolds for tissue and organ regeneration.


  • Open Access

    3D Printing and Supercritical Technologies for the Fabrication of Intricately Structured Aerogels Derived from the Alginate–Chitosan Polyelectrolyte Complex

    by Natalia Menshutina, Andrey Abramov, Eldar Golubev, Pavel Tsygankov

    Additive technologies represent a promising approach to solving problems in the field of tissue engineering, with the potential to develop personalized matrices for the growth of tissue and organ cells. The utilisation of supercritical technologies, encompassing the processes of drying and sterilisation within a supercritical fluid environment, has been demonstrated to generate significant opportunities in the domain of obtaining highly effective matrices for cell growth based on biocompatible materials. The present paper considers the processes involved in the formation of aerogels based on alginate-chitosan polyelectrolyte complex. This paper explores a range of methodologies for the printing process, encompassing direct gel printing and 3D printing employing a heterophase system. The demonstration is made of the possibility of combining the processes of drying and sterilisation in a supercritical fluid environment of personalized matrices based on a polyelectrolyte complex.

  • Open Access

    Processes of Obtaining Nanostructured Materialswith a Hierarchical Porous Structure on the Example of Alginate Aerogels

    by Natalia Menshutina, Olga Fedotova, Andrey Abramov, Eldar Golubev, Yan Sulkhanov, Pavel Tsygankov

    Currently, materials with specific, strictly defined functional properties are becoming increasingly important. A promising strategy for achieving these properties involves developing methods that facilitate the formation of hierarchical porous materials that combine micro-, meso-, and macropores in their structure. Macropores facilitate effective mass transfer of substances to the meso- and micropores, where further adsorption or reaction processes can occur. Aerogels represent a promising class of materials for implementing this approach. The formation of hierarchical porous structures in aerogels can be achieved using soft and hard templating methods or by foaming techniques. This paper presents a comprehensive study of three methods for forming hierarchical porous structures in alginate aerogels: (1) employing surfactants (Pluronic F-68), (2) using zein as a pore-forming component, and (3) foaming in a carbon dioxide medium. The results of micro-CT showed that each of the methods contributes to the formation of macropores within the structure of the resulting aerogels. Size distribution curves of the detected macropores were obtained, showing the presence of macropores ranging from 16 to 323 μm in size for samples obtained using surfactants, from 5 to 195 μm for samples obtained using zein, and from 20 μm to 3 mm for samples obtained by foaming in a carbon dioxide medium. The SEM images demonstrated the macro- and mesoporous fibrous structure of the obtained materials. The nitrogen porosimetry results indicated that samples obtained using surfactants and zein are characterized by a high specific surface area (592–673 m2/g), comparable to the specific surface area for an alginate-based aerogel obtained without the use of pore-forming components. However, the use of the developed methods for the formation of a hierarchical porous structure contributes to an increase in the specific mesopores volume (up to 17.7 cm3/g). The materials obtained by foaming in a carbon dioxide medium are characterized by lower specific surface areas (112–239 m2/g) and specific mesopores volumes (0.6–2.1 cm3/g). Thus, this paper presents a set of methods for forming hierarchical porous structures that can obtain delivery systems for active substances with a controlled release profile and highly efficient platforms for cell culturing.


  • Open Access

    Processes of Obtaining Nanostructured Materials with a Hierarchical Porous Structure on the Example of Alginate Aerogels

    by Natalia Menshutina, Olga Fedotova, Andrey Abramov, Eldar Golubev, Yan Sulkhanov, Pavel Tsygankov

    Currently, materials with specific, strictly defined functional properties are becoming increasingly important. A promising strategy for achieving these properties involves developing methods that facilitate the formation of hierarchical porous materials. Aerogels represent a promising class of materials for implementing this approach. The synthesis of aerogels based on biopolymers exhibiting a hierarchical porous structure—combining micropores, mesopores, and macropores—enables the development of active substance delivery systems with controlled release profiles and highly efficient platforms for cell cultivation. The formation of hierarchical porous structures in aerogels can be achieved using soft and hard templating methods or by foaming techniques. This paper presents a comprehensive study of three methods for forming hierarchical porous structures in alginate aerogels: (1) employing surfactants (Pluronic F-68), (2) using zein as a pore-forming component, and (3) foaming in a carbon dioxide environment. The results of computed X-ray microtomography (micro-CT), scanning electron microscopy (SEM) and nitrogen porosimetry are presented. For each method of forming hierarchical porous structures, we investigated the effects of various parameters on the structural characteristics of the resulting material: for method (1), the surfactant concentration (0.25-1.00 wt.%); for method (2) – alginate-to-zein ratio (20:1, 10:1, 5:1); and for method (3) – pressure (50 and 100 bar) and holding time (1 and 3 hours). The results of micro-CT showed that each of the methods contributes to the formation of macropores within the structure of the resulting aerogels. Size distribution curves of the detected macropores were obtained, showing the presence of macropores ranging from 16 to 323 micrometers in size for samples obtained using surfactants, from 5 to 195 micrometers for samples obtained using zein, and from 20 micrometers to 3 mm for samples obtained by foaming in a carbon dioxide medium. The SEM images demonstrated the macro- and mesoporous fibrous structure of the obtained materials. The nitrogen porosimetry results indicated that samples obtained using surfactants and zein are characterized by a high specific surface area (592-673 m2/g), comparable to the specific surface area for an alginate-based aerogel obtained without the use of pore-forming components. However, the use of the developed methods for the formation of a hierarchical porous structure contributes to an increase in the specific mesopores volume (up to 17.7 cm3/g). The materials obtained by foaming in a carbon dioxide medium are characterized by lower specific surface areas (112-239 m2/g) and specific mesopores volumes (0.6-2.1 cm3/g). Thus, this paper presents a set of methods for forming hierarchical porous structures, wherein macropores facilitate effective mass transfer of substances to meso- and micropores, where subsequent adsorption or reaction processes occur.


  • Computer Simulation of Hydrodynamics and Mass Transfer of Supercritical Drying of Aerogels in Laboratory and Industrial Scale Apparatuses

    by E. V. Golubev, E. N. Suslova, A. E. Lebedev

    This article presents the results of modeling the hydrodynamics and mass transfer of the supercritical drying process in apparatuses of various volumes. Calculations of hydrodynamics and mass transfer were carried out using the Ansys Fluent software package, exemplified with devices of laboratory and industrial volumes—2 and 70 L, respectively. The modeling aimed to predict the time of supercritical drying and the feasibility of scaling the process. Continuum mechanics principles were employed to model hydrodynamics and mass transfer, treating the multicomponent system as a viscous compressible fluid. The calculation took place in two areas: within a porous body and in the free volume of an apparatus of a certain scale. Additionally, a study was conducted on the hydrodynamics and mass transfer of the process in the presence of a divider, necessary to minimize the formation of stagnant zones in the apparatus. For optimization purposes, the divider calculation was performed separately from the apparatus. The data obtained were then used in subsequent calculations of the hydrodynamics and mass transfer of the process, employing a user-defined function (UDF) written in the C programming language. A preliminary study of the kinetics of supercritical drying in a 2-L apparatus was carried out to assess the possibility of using the proposed mathematical model for an industrial-level apparatus. The simulation demonstrated that the proposed model is capable of describing the process of supercritical drying in devices of various volumes. Furthermore, calculated curves of the kinetics of supercritical drying, profiles of the velocity distribution of supercritical carbon dioxide, and the distribution of the concentration of isopropyl alcohol at various points in time across the cross-section of the apparatus were obtained.