Meelis Pohlak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Meelis Pohlak has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jüri Majak
Department of Mechanical and Industrial Engineering Tallinn University of Technology Ehitajate tee 5 19086 Tallinn Estonia
4 shared publications Rein Küttner
3 shared publications- Fjodor Sergejev
Department of Mechanical and Industrial Engineering Tallinn University of Technology Ehitajate tee 5 19086 Tallinn Estonia
2 shared publications - Kristo Karjust
Department of Mechanical and Industrial Engineering Tallinn University of Technology Ehitajate tee 5 19086 Tallinn Estonia
2 shared publications Aigar Hermaste
Department of Mechanical and Industrial Engineering Tallinn University of Technology Ehitajate tee 5 19086 Tallinn Estonia
1 shared publication- Alar Niidas
Tallinn University of Technology, Tallinn, Estonia
1 shared publication
Latest Publications
- Open Access
- 8 May 2025
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences
- Vol. 74 (2) , 181-185
Application issues of additive manufacturing in plaster mold casting of metals
Additive manufacturing (AM), commonly known as 3D printing, has emerged as a transformative technology in the field of manufacturing, offering unprecedented flexibility in creating complex geometries. This study investigates the practical application of AM in producing patterns for investment casting using plaster molds for aluminum components. The primary objective is to identify suitable filament materials for printing patterns that can meet the demands of the casting process while ensuring high-quality aluminum castings. As the process of investment casting in plaster molds involves burning out the pattern, it is important that the burn-out process of the 3D-printed pattern leaves as little residue as possible in the mold. An experimental approach was adopted to evaluate various polylactic acid (PLA) filament materials. Each material was assessed based on the amount of residue remaining after the burn-out process during mold making. The results indicated that some types of PLA filaments behave considerably differently from others. Some filaments leave significantly less residue and can ensure better casting quality. The study provides suggestions for using low-cost filament extrusion-based 3D printers in the plaster mold casting of aluminum products. The findings contribute to the broader adoption of AM in foundry applications by providing insights into material selection and process optimization. Future work will focus on refining the balance between print efficiency and casting quality.
- 8 May 2025
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences
- Vol. 74 (2) , 181-185
Open AccessApplication issues of additive manufacturing in plaster mold casting of metals
Additive manufacturing (AM), commonly known as 3D printing, has emerged as a transformative technology in the field of manufacturing, offering unprecedented flexibility in creating complex geometries. This study investigates the practical application of AM in producing patterns for investment casting using plaster molds for aluminum components. The primary objective is to identify suitable filament materials for printing patterns that can meet the demands of the casting process while ensuring high-quality aluminum castings. As the process of investment casting in plaster molds involves burning out the pattern, it is important that the burn-out process of the 3D-printed pattern leaves as little residue as possible in the mold. An experimental approach was adopted to evaluate various polylactic acid (PLA) filament materials. Each material was assessed based on the amount of residue remaining after the burn-out process during mold making. The results indicated that some types of PLA filaments behave considerably differently from others. Some filaments leave significantly less residue and can ensure better casting quality. The study provides suggestions for using low-cost filament extrusion-based 3D printers in the plaster mold casting of aluminum products. The findings contribute to the broader adoption of AM in foundry applications by providing insights into material selection and process optimization. Future work will focus on refining the balance between print efficiency and casting quality.
- 21 March 2025
- Published by Springer Nature
- p. 430-441
Enhancing Project-Based Learning Through the Integration of Computer Aided Manufacturing and Metal Shaping Technologies Courses
- 21 March 2025
- Published by Springer Nature
- p. 430-441
Enhancing Project-Based Learning Through the Integration of Computer Aided Manufacturing and Metal Shaping Technologies Courses
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2989 (1)
The beneficial effect of reusable food boxes on the green transition
Reusable lunch boxes, though they are convenient, are still a controversial topic in the aspect of cleanliness and spread of bacteria. The public’s expectation is that they should be usable for many years without having any leaks or deformations, therefore they should be made mechanically stronger. It is also clear that a reusable box takes a lot more material to produce than a disposable one does. The constant cleaning, washing, heat and possible UV-C radiation must also not reduce the quality of the different materials that make up the item. This article discusses various parameters that should be critically evaluated before introducing reusable food boxes as a more sustainable option. This is in terms of designing the lifespan of the boxes as well as the rules for daily use and cleaning.
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2989 (1)
Open AccessThe beneficial effect of reusable food boxes on the green transition
Reusable lunch boxes, though they are convenient, are still a controversial topic in the aspect of cleanliness and spread of bacteria. The public’s expectation is that they should be usable for many years without having any leaks or deformations, therefore they should be made mechanically stronger. It is also clear that a reusable box takes a lot more material to produce than a disposable one does. The constant cleaning, washing, heat and possible UV-C radiation must also not reduce the quality of the different materials that make up the item. This article discusses various parameters that should be critically evaluated before introducing reusable food boxes as a more sustainable option. This is in terms of designing the lifespan of the boxes as well as the rules for daily use and cleaning.
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2989 (1)
Effect of surface features stiffness on tribological performance of 3D printed light-weight Ti6Al4V alloy
The Nature has created multiple living organisms with designs that ideally fit for their purposes. Nature inspiration and mimicking are currently accepted as promising methods for developing new approaches in materials science and other research areas. A modification of the surface topography allows manipulation of the frictional properties of a material. This could be extremely important for areas where external lubricants cannot be used, for example, in space, the human body (in artificial HIP or other joint replacements, for example), the food industry, etc. In the first two mentioned applications, materials should be lightweight. Increased elasticity of the joint’s surface features (SF) for engineering devices or even human implants could reduce peak loads (lower risk of damage) and improve patient comfort. The concept for the classification of possible SFs was proposed in our work. Several SFs were modelled, their performance simulated in ANSYS software, and real materials were produced by 3D printing and tribologically tested. The intended possible deformation of the SFs under the test load was linked to the roughness of the counterbody, possible misalignments of the system, and formed wear debris. It was demonstrated that the shape of the SFs affects the wear rates of the SFs, the counterbody, and the coefficient of friction. The 3D optical images are provided to demonstrate the counterbody surface after testing against SFs.
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2989 (1)
Open AccessEffect of surface features stiffness on tribological performance of 3D printed light-weight Ti6Al4V alloy
The Nature has created multiple living organisms with designs that ideally fit for their purposes. Nature inspiration and mimicking are currently accepted as promising methods for developing new approaches in materials science and other research areas. A modification of the surface topography allows manipulation of the frictional properties of a material. This could be extremely important for areas where external lubricants cannot be used, for example, in space, the human body (in artificial HIP or other joint replacements, for example), the food industry, etc. In the first two mentioned applications, materials should be lightweight. Increased elasticity of the joint’s surface features (SF) for engineering devices or even human implants could reduce peak loads (lower risk of damage) and improve patient comfort. The concept for the classification of possible SFs was proposed in our work. Several SFs were modelled, their performance simulated in ANSYS software, and real materials were produced by 3D printing and tribologically tested. The intended possible deformation of the SFs under the test load was linked to the roughness of the counterbody, possible misalignments of the system, and formed wear debris. It was demonstrated that the shape of the SFs affects the wear rates of the SFs, the counterbody, and the coefficient of friction. The 3D optical images are provided to demonstrate the counterbody surface after testing against SFs.
- Open Access
- 17 August 2017
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences
- Vol. 66 (3) , 295-299
Experimental study of steered fibre composite production; pp. 295–299
The main goal of the study was to design the laminating head for an industrial robot that would be competitive from the aspect of the price and versatility and therefore suitable for the SMEs. A set of experiments were carried out to analyse key parameters during the laminating process of PA12-CF60 material.
- 17 August 2017
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences
- Vol. 66 (3) , 295-299
Open AccessExperimental study of steered fibre composite production; pp. 295–299
The main goal of the study was to design the laminating head for an industrial robot that would be competitive from the aspect of the price and versatility and therefore suitable for the SMEs. A set of experiments were carried out to analyse key parameters during the laminating process of PA12-CF60 material.
- Open Access
- 16 November 2010
- Published by Estonian Academy Publishers in Estonian Journal of Engineering
- Vol. 16 (4) , 297-306
Optimal adhesion measuring methods of the glass fibre reinforcement layer; pp. 297–306
The objective of the current study is to analyse the adhesion processes between the glass fibre reinforcement layer and acrylic sheet to find out the optimal adhesion measuring methods depending on the reinforcement layer concentrations and plastic composite material parameters (dimensions, wall angles, edge radiuses). The experimental tests with different glass fibre reinforceÂment composition, material heating temperatures and adhesion area variations have been considered. For finding out the optimal adhesion measuring method different well known methods have been tested. For optimal selection of the adhesion area an optimization model have been proposed. Together with the adhesion area optimization an attempt has been made to find out the maximum tensile force, depending on the conditions and material parameters. The FEM simulation has been performed with optimal adhesion area values to verify the prediction accuracy of the surrogate model.
- 16 November 2010
- Published by Estonian Academy Publishers in Estonian Journal of Engineering
- Vol. 16 (4) , 297-306
Open AccessOptimal adhesion measuring methods of the glass fibre reinforcement layer; pp. 297–306
The objective of the current study is to analyse the adhesion processes between the glass fibre reinforcement layer and acrylic sheet to find out the optimal adhesion measuring methods depending on the reinforcement layer concentrations and plastic composite material parameters (dimensions, wall angles, edge radiuses). The experimental tests with different glass fibre reinforceÂment composition, material heating temperatures and adhesion area variations have been considered. For finding out the optimal adhesion measuring method different well known methods have been tested. For optimal selection of the adhesion area an optimization model have been proposed. Together with the adhesion area optimization an attempt has been made to find out the maximum tensile force, depending on the conditions and material parameters. The FEM simulation has been performed with optimal adhesion area values to verify the prediction accuracy of the surrogate model.
- Open Access
- 26 February 2009
- Published by Estonian Academy Publishers in Estonian Journal of Engineering
- Vol. 15 (1) , 61-72
Engineering optimization of a car frontal protection system component; pp. 61–72
The study focuses on the design of a car frontal protection system using response surface modelling and a genetic algorithm. The main attention was paid to optimal design of brackets. The analysis of car–pedestrian collision situation was performed using explicit FEA solver and the stiffness analysis of the bracket with implicit FEA solver. Multi-criteria optimal design problem was formulated and the necessary optimality conditions were derived. The obtained numerical results were validated by comparing with experimental test results. An alternative numerical approach was realized using optimization software package LS-OPT.
- 26 February 2009
- Published by Estonian Academy Publishers in Estonian Journal of Engineering
- Vol. 15 (1) , 61-72
Open AccessEngineering optimization of a car frontal protection system component; pp. 61–72
The study focuses on the design of a car frontal protection system using response surface modelling and a genetic algorithm. The main attention was paid to optimal design of brackets. The analysis of car–pedestrian collision situation was performed using explicit FEA solver and the stiffness analysis of the bracket with implicit FEA solver. Multi-criteria optimal design problem was formulated and the necessary optimality conditions were derived. The obtained numerical results were validated by comparing with experimental test results. An alternative numerical approach was realized using optimization software package LS-OPT.
- Open Access
- 5 September 2007
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences. Engineering
- Vol. 13 (2) , 117-128
The design and production technology of large composite plastic products
The objective of this paper is investigation of the optimization of manufacturing technology processes of large composite plastic products. One of the key problems is how to integrate computer-based product design and planning of the technological process. An optimization model is proposed to control and analyse the calculated technology planning route, optimal vacuum forming processes, the technology of post-forming operations (like trimming and drilling of slots and cut-outs) and strengthening and assembling operations. Finite element analysis and artificial neural networks are included in the model used in the study. A family of large composite plastic products together with the derivate products and their production technologies is designed using the proposed methodology.
- 5 September 2007
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences. Engineering
- Vol. 13 (2) , 117-128
Open AccessThe design and production technology of large composite plastic products
The objective of this paper is investigation of the optimization of manufacturing technology processes of large composite plastic products. One of the key problems is how to integrate computer-based product design and planning of the technological process. An optimization model is proposed to control and analyse the calculated technology planning route, optimal vacuum forming processes, the technology of post-forming operations (like trimming and drilling of slots and cut-outs) and strengthening and assembling operations. Finite element analysis and artificial neural networks are included in the model used in the study. A family of large composite plastic products together with the derivate products and their production technologies is designed using the proposed methodology.
- Open Access
- 5 September 2007
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences. Engineering
- Vol. 13 (2) , 129-139
Manufacturability and limitations in incremental sheet forming
In the actual incremental sheet forming process two kinds of risks can be outlined: material failure and tool failure. From the point of view of safe manufacturing, both risks should be minimized. The aim of the current study is to predict material and tool failure. An experimental, numerical and theoretical study is performed in order to determine the material formability and the forming load components. Incremental sheet forming strategies for determining the forming limit diagram are pointed out.
- 5 September 2007
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences. Engineering
- Vol. 13 (2) , 129-139
Open AccessManufacturability and limitations in incremental sheet forming
In the actual incremental sheet forming process two kinds of risks can be outlined: material failure and tool failure. From the point of view of safe manufacturing, both risks should be minimized. The aim of the current study is to predict material and tool failure. An experimental, numerical and theoretical study is performed in order to determine the material formability and the forming load components. Incremental sheet forming strategies for determining the forming limit diagram are pointed out.
- Open Access
- 19 November 2004
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences. Engineering
- Vol. 10 (4) , 261-269
Modelling and optimal design of the incremental forming process
- 19 November 2004
- Published by Estonian Academy Publishers in Proceedings of the Estonian Academy of Sciences. Engineering
- Vol. 10 (4) , 261-269
Open AccessModelling and optimal design of the incremental forming process