Linda Jäckel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Linda Jäckel has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Jörg Schuster
Fraunhofer Institute for Electronic Nano Systems ENAS
3 shared publications - Alexey Shaporin
Fraunhofer Institute for Electronic Nano Systems ENAS
1 shared publication Andre Lauff
Infineon Technologies Dresden GmbH & Co. KG, Dresden, Germany
1 shared publication- Andreas Zienert
Center for Microtechnologies, Chemnitz University of Technology, 09107 Chemnitz, Germany
1 shared publication - Anna-Sophie Seidel
GlobalFoundries Dresden Module One LLC & Co. KG 4 , Dresden 01109, Germany
1 shared publication - Annekathrin Zeun
GlobalFoundries Dresden Module One LLC & Co. KG 4 , Dresden 01109, Germany
1 shared publication
Latest Publications
- Open Access
- 5 September 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (5) , 879-889
Real-Time Interfacial Pressure Prediction in CMP Using Machine Learning Surrogates of Finite Element Simulations
Achieving uniform material removal in chemical-mechanical polishing requires precise tuning of interfacial pressure. High-fidelity finite-element simulations can accurately model pressure profiles essential for this tuning process. However, these simulations are too computationally intensive for extensive parameter studies. This work introduces a surrogate modelling approach for two-dimensional radial pressure profiles in five-zone polishing heads. Functional principal component analysis identifies a compact, data-driven basis from a dataset of finite-element-generated pressure profiles. Kernel ridge regression then maps applied zone loadings to the extracted coefficients. Validation across diverse loading scenarios shows that the proposed surrogate matches the accuracy of detailed finite-element simulations while delivering millisecond-level predictions and clear interpretability which inputs drive specific pressure‐profile changes. Researchers with existing high-fidelity models can adopt this framework to develop fast, interpretable surrogates for real-time process optimization.
- 5 September 2025
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 19 (5) , 879-889
Open AccessReal-Time Interfacial Pressure Prediction in CMP Using Machine Learning Surrogates of Finite Element Simulations
Achieving uniform material removal in chemical-mechanical polishing requires precise tuning of interfacial pressure. High-fidelity finite-element simulations can accurately model pressure profiles essential for this tuning process. However, these simulations are too computationally intensive for extensive parameter studies. This work introduces a surrogate modelling approach for two-dimensional radial pressure profiles in five-zone polishing heads. Functional principal component analysis identifies a compact, data-driven basis from a dataset of finite-element-generated pressure profiles. Kernel ridge regression then maps applied zone loadings to the extracted coefficients. Validation across diverse loading scenarios shows that the proposed surrogate matches the accuracy of detailed finite-element simulations while delivering millisecond-level predictions and clear interpretability which inputs drive specific pressure‐profile changes. Researchers with existing high-fidelity models can adopt this framework to develop fast, interpretable surrogates for real-time process optimization.
- Open Access
- 27 February 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (2)
Low-temperature ALD of metallic cobalt using the CoCOhept precursor: Simulation-assisted process development for deposition on temperature sensitive 3D-structures
This work presents the development and implementation of a low-temperature atomic layer deposition (ALD) process for metallic cobalt thin films. The works are based on a set of five different Co precursors with alkyne ligands. Computational analysis identified CoCOhept([Co2(CO)6HC≡CC5H11]) as the most promising candidate among a series of potential precursors. Using density functional theory calculations, we examined the surface chemistry of Co2(CO)6HC≡CCH3 during Co ALD. The precursor undergoes dissociative adsorption on Co(001), followed by efficient ligand removal via a hydrogenation reaction with surface H atoms. Simultaneously to the process development with CoCOhept, the chamber geometry has been co-optimized using computational fluid dynamics simulation. By this, the chamber height was identified as a critical factor for a homogenous precursor distribution. We show that a minimum height is mandatory in order to avoid local concentration hot-spots under the gas inlets. The predictions by the model are in good agreement with experiments employing varying chamber geometries. Further experimental tests show the influence of the precursor flow and the plasma pulse duration. We demonstrate the integration of the process in high aspect-ratio silicon structures and on temperature sensitive 3D-photoresist structures.
- 27 February 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (2)
Open AccessLow-temperature ALD of metallic cobalt using the CoCOhept precursor: Simulation-assisted process development for deposition on temperature sensitive 3D-structures
This work presents the development and implementation of a low-temperature atomic layer deposition (ALD) process for metallic cobalt thin films. The works are based on a set of five different Co precursors with alkyne ligands. Computational analysis identified CoCOhept([Co2(CO)6HC≡CC5H11]) as the most promising candidate among a series of potential precursors. Using density functional theory calculations, we examined the surface chemistry of Co2(CO)6HC≡CCH3 during Co ALD. The precursor undergoes dissociative adsorption on Co(001), followed by efficient ligand removal via a hydrogenation reaction with surface H atoms. Simultaneously to the process development with CoCOhept, the chamber geometry has been co-optimized using computational fluid dynamics simulation. By this, the chamber height was identified as a critical factor for a homogenous precursor distribution. We show that a minimum height is mandatory in order to avoid local concentration hot-spots under the gas inlets. The predictions by the model are in good agreement with experiments employing varying chamber geometries. Further experimental tests show the influence of the precursor flow and the plasma pulse duration. We demonstrate the integration of the process in high aspect-ratio silicon structures and on temperature sensitive 3D-photoresist structures.
- Open Access
- 29 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Surface chemistry models for low temperature Si epitaxy process simulation in a single-wafer reactor
We investigate Si epitaxy using 3D reactor scale computational fluid dynamics simulations coupled with surface chemistry models for the growth of pure silicon and phosphorus-doped silicon (Si:P) films. We focus on low temperature Si and Si:P processes using dichlorosilane (DCS) and phosphine. Based on existing DCS-based Si chemistry models for higher process temperatures, we developed a new kinetic chemistry model for low temperature Si epitaxy. To include doping, we developed an additional empirical model for Si:P epitaxy as there is not sufficient qualitative data on phosphine chemistry available for a kinetic chemistry model. This work provides Si and Si:P surface chemistry models, which allow reactor scale process simulations to get valuable process insights, enabling rational process optimization and supporting process transfer. Process optimization is demonstrated through process parameter variation with the main goal being the reduction of Si process variability by increasing within-wafer growth rate homogeneity.
- 29 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Open AccessSurface chemistry models for low temperature Si epitaxy process simulation in a single-wafer reactor
We investigate Si epitaxy using 3D reactor scale computational fluid dynamics simulations coupled with surface chemistry models for the growth of pure silicon and phosphorus-doped silicon (Si:P) films. We focus on low temperature Si and Si:P processes using dichlorosilane (DCS) and phosphine. Based on existing DCS-based Si chemistry models for higher process temperatures, we developed a new kinetic chemistry model for low temperature Si epitaxy. To include doping, we developed an additional empirical model for Si:P epitaxy as there is not sufficient qualitative data on phosphine chemistry available for a kinetic chemistry model. This work provides Si and Si:P surface chemistry models, which allow reactor scale process simulations to get valuable process insights, enabling rational process optimization and supporting process transfer. Process optimization is demonstrated through process parameter variation with the main goal being the reduction of Si process variability by increasing within-wafer growth rate homogeneity.