QYQiaoyue Yang

Qiaoyue Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qiaoyue Yang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study on the particle dynamic characteristics in a centrifugal pump based on an improved computational fluid dynamics-discrete element model

    by Wei Pu, Leilei Ji, Wei Li, Weidong Shi, Fei Tian, Cui Xiao, Qiaoyue Yang, Yang Yang, Ramesh Agarwal

    To accurately investigate the solid–liquid flow mechanisms within the pump, this study employs an improved Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) approach to examine the solid–liquid interactions in a centrifugal pump. First, the improved CFD-DEM is introduced, focusing on turbulence dissipation near the wall and velocity reconstruction. Then, a comparison is made between the CFD-DEM's performance before and after the enhancements. Finally, an analysis is conducted on how the dynamic characteristics of particles within the pump vary under different solid phase concentration conditions. The study revealed that the particle distribution from the corrected CFD-DEM aligns more closely with the experimental results. At a 2% concentration under the design conditions, the head error was reduced by 0.476%, while the efficiency error decreased by 0.076%. Additionally, as the solid phase concentration increased, there was a corresponding rise in the impact power loss of the particles, dissipative power loss, collision frequency, peak values of particle collisions, and the degree of overlap during these collisions. The comparison revealed that the pressure gradient force has the most significant impact on particle motion. As the pressure gradient force increases, the shear power dissipation of the particles also rises. For solid phase concentrations ranging from 1% to 4%, the average shear power variation during the computation period is between 4.28 × 10−6 W and 5.68 × 10−6 W. As the solid phase concentration increases, the volume fraction of the solid phase distribution on the component wall also gradually rises. These findings provide valuable insights for enhancing the accuracy of research on solid–liquid flow in centrifugal pumps.


  • Open Access

    Research on Efficiency Improvement Technology of Wide Range Centrifugal Pump Based on Genetic Algorithm and Internal Flow Loss Diagnosis

    by Zhenbo Liu, Leilei Ji, Wei Pu, Wei Li, Qiaoyue Yang, Xing Zhang, Yang Yang, Weidong Shi, Fei Tian, Sen Jiang, et al.

    Wide-flow centrifugal pumps are widely used in marine, petrochemical, and thermal power plants because of their good hydraulic performance. To enhance the hydraulic performance of wide-flow centrifugal pumps and thereby reduce energy consumption, in this study, an automatic optimization system for rotating machinery based on genetic algorithms was employed. Initially, a detailed description of the centrifugal pump model and the optimization system was provided. Subsequently, sensitivity analysis of key parameters was conducted through design of experiments (DOEs), identifying the primary factors influencing the pump performance. This research demonstrated that the blade wrap angle, as well as the leading and trailing vane exit angles of the front and back shrouds, are crucial factors affecting the performance of the centrifugal pump, with the blade wrap angle exerting a particularly significant impact on pump efficiency, contributing up to 83.6%. After optimization, the pump’s head increased by 1.29%, and the efficiency improved by 2.96%. The flow field of the optimized pump was significantly improved, with enhanced fluidity, achieving higher head and efficiency at a lower torque. Additionally, the pumping performance was augmented with an enhanced diffuser capacity in the pump volute, leading to increased exit pressure energy, while the turbulent kinetic energy and entropy production losses were significantly reduced. Under various operating conditions, the entropy production losses at the pump walls were all decreased, and the total mechanical energy within the impeller showed an increasing trend from the inlet to the outlet, resulting in lower energy consumption. In this paper, a reference is provided for further enhancing the hydraulic performance of centrifugal pumps in the future.


  • Experimental study on the unsteady evolution mechanism of centrifugal pump impeller wake under solid–liquid two-phase conditions: Impact of particle concentration

    by Wei Pu, Leilei Ji, Wei Li, Qiaoyue Yang, Zhenbo Liu, Yang Yang, Haoming Li, Wei Huang, Ramesh Agarwal

    To study the spatiotemporal evolution process of particle wakes behind the impeller in the centrifugal pump, this paper utilized high-speed photography to capture the particle motion characteristics under different solid-phase particle concentrations (1%, 1.5%, and 2%). First, this paper studies the changes in hydraulic performance of the centrifugal pump under solid–liquid two-phase flow conditions. It then introduces the evolution process of the impeller particle wake, comparing the differences in particle wake evolution under varying solid-phase concentrations. Finally, the impact of the solid-phase concentration on the wear of the volute's partitions is investigated. This study found that as the solid-phase particle concentration increases, the hydraulic performance of the pump gradually declines. Under the design conditions, when the solid-phase concentration increases by 0.5%, the efficiency of the centrifugal pump decreases by 0.56% and 0.35%. There is mutual transport of particles between adjacent wakes, and the movement of particle wakes within the volute passage is not equidistant over time. As the solid-phase particle concentration increases, wake cutting occurs at the volute partitions, and there is a significant solid–liquid separation between the particle wakes. The spatial evolution of the particle wakes is significantly influenced by the solid-phase concentration. Wear at the volute partitions intensifies with increasing solid-phase concentration and is also affected by changes in the particle wakes. The research results provide a basis for further exploration of the solid–liquid two-phase flow dynamics within centrifugal pumps.


  • Open Access

    Vortex dynamics characteristics in the tip region based on Wray–Agarwal model

    by Wei Li, Wei Pu, Leilei Ji, Mingjiang Liu, Qiaoyue Yang, Xinrui He, Ramesh Agarwal

    In order to solve the blockage effect and energy dissipation phenomenon caused by cavitation in the low-pressure vortex core region, this paper analyzes the spatial evolution of vorticity intensity and turbulent kinetic energy intensity under different cavitation conditions based on the Wray–Agarwal (WA) model. First, the tip leakage flow characteristics are studied, the evolution of vorticity and vorticity intensity is analyzed, then the distribution of turbulent kinetic energy distribution in the blade tip region is studied, and finally, the vorticity transport characteristics of the tip region are analyzed. It is found that the tip leakage rate is less affected by the vortex cavitation of the tip leakage, and there is a strong interaction between the leakage flow at the tip leading edge and the trailing edge, and the separation vortices and low-speed regions formed in the end-wall region cause blockage of the flow passage. Low pressure causes cavitation to cover most regions of the suction surface, inhibiting the formation and development of the tip leakage vortices. The distribution range of high turbulent kinetic energy region is almost the same as that of high-vorticity region, and there is a positive correlation between the two intensities. Severe cavitation causes the high turbulent kinetic energy region at the outlet of the flow passage to develop in the radial and axial directions of the impeller, which increases the turbulent dissipation and energy loss. The change of vorticity transport intensity caused by cavitation is mainly reflected in the expansion contraction term, and the Coriolis force term plays a dominant role in the vorticity transport process. This paper provides a reference for further improving the performance of mixed-flow pumps.


  • Open Access

    Research on the Hydrodynamic Noise Characteristics of a Mixed-Flow Pump

    by Qiaoyue Yang, Wei Li, Leilei Ji, Weidong Shi, Wei Pu, Yu Long, Xinrui He

    This study presents a comprehensive investigation of the internal noise characteristics of a mixed-flow pump by combining computational fluid dynamics (CFD) and computational acoustics. The turbulent flow field of the pump is simulated using the unsteady SST k-ω turbulence model in CFD. The contributions of the volute, guide vanes, and impeller to the internal noise are analyzed and compared using the Lighthill theory, FW-H formula, and LMS Virtual Lab software for acoustic simulation. The research findings indicate that the energy of pressure fluctuations in the mixed-flow pump is predominantly concentrated at the blade passing frequency and its low-frequency harmonics. This suggests that the internal noise is mainly in the low-frequency range, with higher energy at the blade passing frequency and its harmonics. Under the 0.6Qdes flow condition, the flow inside the pump becomes more complex, resulting in higher sound pressure levels and sound power levels compared to higher flow conditions. However, for flow conditions ranging from 0.8Qdes to 1.2Qdes, the sound pressure levels gradually increase with increasing flow rate, with the sound pressure level at 1.0Qdes being nearly identical to that at 1.2Qdes. The analysis of sound power level spectra at different flow rates reveals that the distribution characteristics of internal vortex structures directly impact the hydrodynamic noise inside the mixed-flow pump. These research findings provide a significant theoretical basis for noise control in mixed-flow pumps.