Duc-Anh Nguyen
Duc-Anh Nguyen has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Jin-Hyuk Kim
Convergence Manufacturing System Engineering (Green Process and Energy System Engineering), University of Science & Technology, Daejeon, South Korea
5 shared publications Byung-Lyul Choi
1 shared publicationCong-Truong Dinh
1 shared publication- Dong-Hoon Choi
Hanyang University
1 shared publication Gyeong Sung Kim
1 shared publication- Gyeong Sung Kim1 shared publication
Latest Publications
- Open Access
- 19 March 2026
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 77
Effect of impeller tip clearance on cavitation in an axial-flow pump
- 19 March 2026
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 77
Open AccessEffect of impeller tip clearance on cavitation in an axial-flow pump
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Comparative analysis of flow physics in axial-flow pump predicted through the advanced unsteady numerical techniques
Appropriate numerical methodologies should be selected for accurate, efficient computational simulations. This study is a comprehensive comparative analysis of the flow phenomena within an axial-flow pump that are predicted using numerical approaches: unsteady Reynolds-averaged Navier–Stokes (URANS), detached-eddy simulation (DES), and large-eddy simulation (LES). The shear stress transport k−ω turbulence model, combined with reattachment modification, is used for URANS prediction, while the wall-adapting local eddy-viscosity model for subgrid-scale (SGS) closure is used for LES. The grid resolution is verified to minimize the dependence of LES predictions on the SGS model. The numerical predictions are compared with the experimental data to assess the accuracy and reliability of the three approaches. The flow characteristics of the axial-flow pump involve cavitation and vortex structures generated by separation flows, tip leakage vortices (TLV), and trailing-edge (TE) vortices and their wake. In URANS, these phenomena are underestimated and have simple structures, limited spatial resolutions, and reduced temporal dependence. URANS predicts the TLV as a nearly straight structure, whereas DES and LES resolve it as an intricate spiral vortex. However, DES overpredicts vortex structures and vorticity intensities in certain regions. LES provides the most detailed and comprehensive depiction of flow phenomena, capturing numerous small-scale, highly convoluted vortex structures that illustrate their formation, evolution, and dissipation. URANS and DES exhibit limitations in resolving complex TE vortices, but LES effectively captures them as vortex shedding that gradually dissipates downstream. Additionally, LES reproduces the laminar–turbulent transition in near-wall flows, which cannot be achieved by URANS and DES.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Comparative analysis of flow physics in axial-flow pump predicted through the advanced unsteady numerical techniques
Appropriate numerical methodologies should be selected for accurate, efficient computational simulations. This study is a comprehensive comparative analysis of the flow phenomena within an axial-flow pump that are predicted using numerical approaches: unsteady Reynolds-averaged Navier–Stokes (URANS), detached-eddy simulation (DES), and large-eddy simulation (LES). The shear stress transport k−ω turbulence model, combined with reattachment modification, is used for URANS prediction, while the wall-adapting local eddy-viscosity model for subgrid-scale (SGS) closure is used for LES. The grid resolution is verified to minimize the dependence of LES predictions on the SGS model. The numerical predictions are compared with the experimental data to assess the accuracy and reliability of the three approaches. The flow characteristics of the axial-flow pump involve cavitation and vortex structures generated by separation flows, tip leakage vortices (TLV), and trailing-edge (TE) vortices and their wake. In URANS, these phenomena are underestimated and have simple structures, limited spatial resolutions, and reduced temporal dependence. URANS predicts the TLV as a nearly straight structure, whereas DES and LES resolve it as an intricate spiral vortex. However, DES overpredicts vortex structures and vorticity intensities in certain regions. LES provides the most detailed and comprehensive depiction of flow phenomena, capturing numerous small-scale, highly convoluted vortex structures that illustrate their formation, evolution, and dissipation. URANS and DES exhibit limitations in resolving complex TE vortices, but LES effectively captures them as vortex shedding that gradually dissipates downstream. Additionally, LES reproduces the laminar–turbulent transition in near-wall flows, which cannot be achieved by URANS and DES.
- 1 July 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (7)
Multiobjective hydraulic optimization of the diffuser vane in an axial flow pump
Separation flows tend to induce a chaotic flow field that eventually leads to energy losses and reduced efficiency. The present study performed a multiobjective optimization to improve the hydraulic performance of an axial flow pump at the best efficiency point (BEP) and critical stall point based on the diffuser vane (DV) geometry. Computational fluid dynamics were applied to predict the hydraulic performance of a series of DV models with design points generated through design of experiment. Six different surrogate models were evaluated based on the R-squared criteria. The nondominated sorting genetic algorithm II was also employed to search for optimum solutions for design variables. Hydraulic performance balance between low and high flow rate conditions was analyzed based on the velocity triangle. After optimization, the efficiency and total head at the BEP of the optimum model were increased by 2.341% and 2.779%, respectively, compared to the reference model. Despite the minimal changes to the hydraulic performance at the critical stall point, the optimal operating range was notably expanded in the high flow rate region. Thorough evaluation of losses attributed to horseshoe, corner, and trailing-edge vortices was conducted in meridional planes, multiple spans, and various cross sections in the DV domain. Additionally, the formation and development of turbulent flow were analyzed in detail by transient simulation. Vibration and noise caused by instabilities in the flow characteristics of the reference model were substantially reduced by 36.76% and 67.342% at the first higher-harmonic frequencies at the BEP and the critical stall point, respectively.
- 1 July 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (7)
Multiobjective hydraulic optimization of the diffuser vane in an axial flow pump
Separation flows tend to induce a chaotic flow field that eventually leads to energy losses and reduced efficiency. The present study performed a multiobjective optimization to improve the hydraulic performance of an axial flow pump at the best efficiency point (BEP) and critical stall point based on the diffuser vane (DV) geometry. Computational fluid dynamics were applied to predict the hydraulic performance of a series of DV models with design points generated through design of experiment. Six different surrogate models were evaluated based on the R-squared criteria. The nondominated sorting genetic algorithm II was also employed to search for optimum solutions for design variables. Hydraulic performance balance between low and high flow rate conditions was analyzed based on the velocity triangle. After optimization, the efficiency and total head at the BEP of the optimum model were increased by 2.341% and 2.779%, respectively, compared to the reference model. Despite the minimal changes to the hydraulic performance at the critical stall point, the optimal operating range was notably expanded in the high flow rate region. Thorough evaluation of losses attributed to horseshoe, corner, and trailing-edge vortices was conducted in meridional planes, multiple spans, and various cross sections in the DV domain. Additionally, the formation and development of turbulent flow were analyzed in detail by transient simulation. Vibration and noise caused by instabilities in the flow characteristics of the reference model were substantially reduced by 36.76% and 67.342% at the first higher-harmonic frequencies at the BEP and the critical stall point, respectively.
- Open Access
- 25 March 2024
- Published by The Korean Society for New and Renewable Energy in New & Renewable Energy
- Vol. 20 (1) , 116-125
Parametric Study of a Fixed-blade Runner in an Ultra-low-head Gate Turbine
- 25 March 2024
- Published by The Korean Society for New and Renewable Energy in New & Renewable Energy
- Vol. 20 (1) , 116-125
Open AccessParametric Study of a Fixed-blade Runner in an Ultra-low-head Gate Turbine