Carlos Patacas
Carlos Patacas has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Bruno Martins
CEMMPRE—Centre for Mechanical Engineering, Materials and Processes, ARISE—Advanced Production and Intelligent Systems, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal
4 shared publications Albano Cavaleiro
3 shared publications- Pedro M. Faia
University of Coimbra
3 shared publications Filipe Fernandes
2 shared publications- Filipe Fernandes
Department of Mechanical Engineering, CEMMPRE, ARISE, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal
2 shared publications - Albano Cavaleiro
University of Coimbra, CEMMPRE, ARISE, Department of Mechanical Engineering, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal
1 shared publication
Latest Publications
- 18 February 2025
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 228
Real-time temperature monitoring during titanium alloy machining with cutting tools integrating novel thin-film sensors
- 18 February 2025
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 228
Real-time temperature monitoring during titanium alloy machining with cutting tools integrating novel thin-film sensors
- Open Access
- 9 April 2024
- Published by Elsevier in Journal of Science: Advanced Materials and Devices
- Vol. 9 (2)
Expanding the applications of the wear-resistant titanium aluminum nitride thin-film to include temperature sensing
- 9 April 2024
- Published by Elsevier in Journal of Science: Advanced Materials and Devices
- Vol. 9 (2)
Open AccessExpanding the applications of the wear-resistant titanium aluminum nitride thin-film to include temperature sensing
- Open Access
- 23 January 2024
- Published by Elsevier in Journal of Science: Advanced Materials and Devices
- Vol. 9 (2)
Can ZrAlN thin films be used as thermistor sensors for temperature assessment?
- 23 January 2024
- Published by Elsevier in Journal of Science: Advanced Materials and Devices
- Vol. 9 (2)
Open AccessCan ZrAlN thin films be used as thermistor sensors for temperature assessment?
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Adequate Tialn Thin Films Deposited by Sputtering for Thermistor Sensors: The Study of Conduction Mechanisms and the Microstructure Role on the Electrical Properties
A combinatory deposition was performed by direct current magnetron sputtering (DCMS) to develop Ti1-xAlxN thin films with different Ti/Al ratios. The crystal structure as a function of the x was studied by X-ray diffraction, and sheet resistance response was measured up to 200˚C. From x = 0.16 to x = 0.56, the film shows an fcc phase with Al in solid solution in the TiN matrix, whilst from x ≥ 0.69, a mixture of hcp (AlN) and fcc phases is observed. A negative temperature coefficient (NTC) thermistor behavior was found from x = 0.21 onwards, and a maximum sensitivity β of 1600 K was observed for x = 0.56 and 0.69. One fcc sample (x = 0.46) was selected to analyze the chemical states by X-ray photonelectron spectroscopy and the impedance behavior with the temperature by electrical impedance spectroscopy. The crystal structure, bond states and impedance analysis were compared with an AlN thin film. The conduction mechanism for x = 0.46 is based upon electron hopping, and the resistance of the grain boundary is more relevant at low temperatures. We demonstrate that it is possible to use TiAlN as an NTC-thermistor with different crystal structures and chemical compositions.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessAdequate Tialn Thin Films Deposited by Sputtering for Thermistor Sensors: The Study of Conduction Mechanisms and the Microstructure Role on the Electrical Properties
A combinatory deposition was performed by direct current magnetron sputtering (DCMS) to develop Ti1-xAlxN thin films with different Ti/Al ratios. The crystal structure as a function of the x was studied by X-ray diffraction, and sheet resistance response was measured up to 200˚C. From x = 0.16 to x = 0.56, the film shows an fcc phase with Al in solid solution in the TiN matrix, whilst from x ≥ 0.69, a mixture of hcp (AlN) and fcc phases is observed. A negative temperature coefficient (NTC) thermistor behavior was found from x = 0.21 onwards, and a maximum sensitivity β of 1600 K was observed for x = 0.56 and 0.69. One fcc sample (x = 0.46) was selected to analyze the chemical states by X-ray photonelectron spectroscopy and the impedance behavior with the temperature by electrical impedance spectroscopy. The crystal structure, bond states and impedance analysis were compared with an AlN thin film. The conduction mechanism for x = 0.46 is based upon electron hopping, and the resistance of the grain boundary is more relevant at low temperatures. We demonstrate that it is possible to use TiAlN as an NTC-thermistor with different crystal structures and chemical compositions.