Владислав Александрович Булатов
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Владислав Александрович Булатов has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
A. S. Kamenetskikh
Institute of Electrophysics, Ural Branch, Russian Academy of Sciences, 620110, Yekaterinburg, Russia
2 shared publicationsD. A. Zamyatin
Zavaritsky Institute of Geology and Geochemistry, Ural Branch, Russian Academy of Sciences, 620110, Yekaterinburg, Russia
2 shared publicationsL. Ya. Sushanek
Zavaritsky Institute of Geology and Geochemistry, Ural Branch, Russian Academy of Sciences, 620110, Yekaterinburg, Russia
2 shared publicationsS. L. Votyakov
Zavaritsky Institute of Geology and Geochemistry, Ural Branch, Russian Academy of Sciences, 620110, Yekaterinburg, Russia
2 shared publicationsYu. V. Shchapova
Zavaritsky Institute of Geology and Geochemistry, Ural Branch, Russian Academy of Sciences, 620110, Yekaterinburg, Russia
2 shared publicationsInstitute of Geology and Geochemistry of Academician A. N. Zavaritsky of the Ural Branch of the Russian Academy of Sciences
1 shared publication
Latest Publications
- 1 December 2023
- Published by The Russian Academy of Sciences in Журнал аналитической химии
- Vol. 78 (12) , 1106-1118
Analysis of the Chemical Composition and Structure of Micrometer-Thick Complex Oxide Films: A Case Study of a MgAl2O4 Film on SiO2 Using Electron Probe Microanalysis and Confocal Raman Spectroscopy
Methodological approaches to both qualitative structural analysis and quantitative compositional analysis of transparent complex oxide films on dielectric substrates, performed using a Horiba LabRAM HR800 confocal Raman spectrometer and a Cameca SX100 electron probe microanalyzer, are described. The studies were carried out using magnesium–aluminum spinel films of a thickness of 1–3 µm on a quartz glass substrate, obtained by magnetron sputtering. The characterization of the film structure consisted of recording 3D arrays of its Raman spectra based on z depth profiling. The film has a disordered spinel structure with a partially reversed distribution of Mg and Al cations over octa- and tetra-positions. Operation parameters are identified to evaluate the concentration of structure-forming elements (Mg and Al) and impurities (Ti, Cr, Ca, P, Fe, Ni, and Gd) in the film using various X-ray emission lines (optimal accelerating voltage, etc.). The performance of the procedure was determined, and its capabilities and limitations were assessed. The resulting data on the chemical composition of the film are presented.
- 1 December 2023
- Published by The Russian Academy of Sciences in Журнал аналитической химии
- Vol. 78 (12) , 1106-1118
Analysis of the Chemical Composition and Structure of Micrometer-Thick Complex Oxide Films: A Case Study of a MgAl2O4 Film on SiO2 Using Electron Probe Microanalysis and Confocal Raman Spectroscopy
Methodological approaches to both qualitative structural analysis and quantitative compositional analysis of transparent complex oxide films on dielectric substrates, performed using a Horiba LabRAM HR800 confocal Raman spectrometer and a Cameca SX100 electron probe microanalyzer, are described. The studies were carried out using magnesium–aluminum spinel films of a thickness of 1–3 µm on a quartz glass substrate, obtained by magnetron sputtering. The characterization of the film structure consisted of recording 3D arrays of its Raman spectra based on z depth profiling. The film has a disordered spinel structure with a partially reversed distribution of Mg and Al cations over octa- and tetra-positions. Operation parameters are identified to evaluate the concentration of structure-forming elements (Mg and Al) and impurities (Ti, Cr, Ca, P, Fe, Ni, and Gd) in the film using various X-ray emission lines (optimal accelerating voltage, etc.). The performance of the procedure was determined, and its capabilities and limitations were assessed. The resulting data on the chemical composition of the film are presented.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Journal of Analytical Chemistry
- Vol. 78 (12) , 1630-1641
Analysis of the Chemical Composition and Structure of Micrometer-Thick Complex Oxide Films: A Case Study of a MgAl2O4 Film on SiO2 Using Electron Probe Microanalysis and Confocal Raman Spectroscopy
Methodological approaches to both qualitative structural analysis and quantitative compositional analysis of transparent complex oxide films on dielectric substrates, performed using a Horiba LabRAM HR800 confocal Raman spectrometer and a Cameca SX100 electron probe microanalyzer, are described. The studies were carried out using magnesium–aluminum spinel films of a thickness of 1–3 µm on a quartz glass substrate, obtained by magnetron sputtering. The characterization of the film structure consisted of recording 3D arrays of its Raman spectra based on z depth profiling. The film has a disordered spinel structure with a partially reversed distribution of Mg and Al cations over octa- and tetra-positions. Operation parameters are identified to evaluate the concentration of structure-forming elements (Mg and Al) and impurities (Ti, Cr, Ca, P, Fe, Ni, and Gd) in the film using various X-ray emission lines (optimal accelerating voltage, etc.). The performance of the procedure was determined, and its capabilities and limitations were assessed. The resulting data on the chemical composition of the film are presented.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Journal of Analytical Chemistry
- Vol. 78 (12) , 1630-1641
Analysis of the Chemical Composition and Structure of Micrometer-Thick Complex Oxide Films: A Case Study of a MgAl2O4 Film on SiO2 Using Electron Probe Microanalysis and Confocal Raman Spectroscopy
Methodological approaches to both qualitative structural analysis and quantitative compositional analysis of transparent complex oxide films on dielectric substrates, performed using a Horiba LabRAM HR800 confocal Raman spectrometer and a Cameca SX100 electron probe microanalyzer, are described. The studies were carried out using magnesium–aluminum spinel films of a thickness of 1–3 µm on a quartz glass substrate, obtained by magnetron sputtering. The characterization of the film structure consisted of recording 3D arrays of its Raman spectra based on z depth profiling. The film has a disordered spinel structure with a partially reversed distribution of Mg and Al cations over octa- and tetra-positions. Operation parameters are identified to evaluate the concentration of structure-forming elements (Mg and Al) and impurities (Ti, Cr, Ca, P, Fe, Ni, and Gd) in the film using various X-ray emission lines (optimal accelerating voltage, etc.). The performance of the procedure was determined, and its capabilities and limitations were assessed. The resulting data on the chemical composition of the film are presented.
- 1 January 2023
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. History
- Vol. 68 (4) , 1104-1140
Deposition of Base Ore and Alloy Elements in the Bronze Age Metal in the Trans-Urals
The paper studies the problems of the geochemical specialization of the Bronze Age metal items from the eastern flank of the Ural mining and metallurgical province produced at the end of the third millennium BC — the middle of the second millennium BC in the Abashevo, Sintashta, Koptyakov-Seimino and the Alakul centers. The metal geochemical markers determination was performed by means of a local quantitative chemical composition analysis of 101 solid samples with an electron X-ray microanalyzer. The selection consisted of a representative series of copper and bronze items corresponding to various stages of metallurgical conversion process from the classic archaeological sites of the Trans-Urals. Systematization of the analytical data on the chemistry of items from each metal production center made it possible to identify stable compositions of micro-impurities associated with the base ores and alloys. The Abashevo and the Sintashta culture metal demonstrated a stable correlation of excess arsenic and nickel concentrations, which was partly due to the use of the Trans-Urals ores with a high content of these elements, however, the most significant concentration of arsenic (from 2 to 5 %) was observed in the finished items rather than in refined copper ingots or semi-finished products, which may indicate intentional alloying. Tin alloys in the Sintashta culture were quite rare; they demonstrated the same chemistry as the Seimin-Turbino metallurgical traditions. Large-scale use of tin for refined copper alloying was observed only in the Koptyakov-Seimino and the Alakul series. The Alakul series contained some high-tin alloying compositions close to the ideal tin bronzes (18 % Sn). It is possible that the sources of tin for them were the Kazakhstan and the Central Asia deposits. The only impurity integrating the entire ancient metal series, according to microprobe analysis, was sulfur, due to the sulfide feed stock. Sulfur was deposited in blister from the high-copper (above 20 % Cu) sulfide-silica-carbonate mineral blends that met the Bronze Age metal production criteria. The sources of raw materials were associated with the secondary sulfides of the ophiolite deposits hypergenesis zones in the Trans-Urals.
- 1 January 2023
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. History
- Vol. 68 (4) , 1104-1140
Deposition of Base Ore and Alloy Elements in the Bronze Age Metal in the Trans-Urals
The paper studies the problems of the geochemical specialization of the Bronze Age metal items from the eastern flank of the Ural mining and metallurgical province produced at the end of the third millennium BC — the middle of the second millennium BC in the Abashevo, Sintashta, Koptyakov-Seimino and the Alakul centers. The metal geochemical markers determination was performed by means of a local quantitative chemical composition analysis of 101 solid samples with an electron X-ray microanalyzer. The selection consisted of a representative series of copper and bronze items corresponding to various stages of metallurgical conversion process from the classic archaeological sites of the Trans-Urals. Systematization of the analytical data on the chemistry of items from each metal production center made it possible to identify stable compositions of micro-impurities associated with the base ores and alloys. The Abashevo and the Sintashta culture metal demonstrated a stable correlation of excess arsenic and nickel concentrations, which was partly due to the use of the Trans-Urals ores with a high content of these elements, however, the most significant concentration of arsenic (from 2 to 5 %) was observed in the finished items rather than in refined copper ingots or semi-finished products, which may indicate intentional alloying. Tin alloys in the Sintashta culture were quite rare; they demonstrated the same chemistry as the Seimin-Turbino metallurgical traditions. Large-scale use of tin for refined copper alloying was observed only in the Koptyakov-Seimino and the Alakul series. The Alakul series contained some high-tin alloying compositions close to the ideal tin bronzes (18 % Sn). It is possible that the sources of tin for them were the Kazakhstan and the Central Asia deposits. The only impurity integrating the entire ancient metal series, according to microprobe analysis, was sulfur, due to the sulfide feed stock. Sulfur was deposited in blister from the high-copper (above 20 % Cu) sulfide-silica-carbonate mineral blends that met the Bronze Age metal production criteria. The sources of raw materials were associated with the secondary sulfides of the ophiolite deposits hypergenesis zones in the Trans-Urals.