Hoo Min Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hoo Min Lee has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Gil Ho Yoon
School of Mechanical Engineering Hanyang University Seoul South Korea
2 shared publications Chang-Min Lee
Hanyang University
1 shared publicationJosephine Voigt Carstensen
Massachusetts Institute of Technology
1 shared publication- Minje Kim
Artificial Intelligence Graduate School, UNIST, Ulsan, South Korea
1 shared publication - Sol Ji Han
Graduate Student Department of Mechanical Convergence Engineering Hanyang University 04763 Seoul Korea
1 shared publication
Latest Publications
- 22 June 2026
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 35 (7) , 075028
Shape optimization of 4D-printed multi-material morphing structures for enhanced structural stability
4D printing has attracted significant attention in engineering for its ability to introduce novel functionalities into printed structures through shape-morphing. However, structural stability remains a challenge, particularly due to geometry changes under external stimuli. To address this, this study presents a shape optimization framework to maximize the stiffness of fully deployed 4D-printed, multi-material smart structures. Acrylonitrile butadiene styrene (ABS) and polycarbonate/acrylonitrile butadiene styrene (PCABS) are used to enable sequential morphing at their respective glass transition temperatures (105°C and 125°C). Structural bending is achieved through controlled longitudinal and lateral printing orientations, with geometry parameterized by width values for optimization. Tangent stiffness is maximized under a volume constraint using finite element method (FEM)-based transient thermal analysis, sensitivity evaluation, and gradient-based updates. Two application cases-a self-morphing table leg and a prosthetic leg-demonstrate the method. Optimized designs achieve up to a 28.18% increase in stiffness over initial designs. Fabricated prototypes are thermally actuated and compression-tested, showing less than 6% deviation from FEM predictions. These results validate the proposed framework as an effective approach for improving the performance of 4D-printed, multi-material morphing structures, with potential applications in adaptive and load-bearing systems.
- 22 June 2026
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 35 (7) , 075028
Shape optimization of 4D-printed multi-material morphing structures for enhanced structural stability
4D printing has attracted significant attention in engineering for its ability to introduce novel functionalities into printed structures through shape-morphing. However, structural stability remains a challenge, particularly due to geometry changes under external stimuli. To address this, this study presents a shape optimization framework to maximize the stiffness of fully deployed 4D-printed, multi-material smart structures. Acrylonitrile butadiene styrene (ABS) and polycarbonate/acrylonitrile butadiene styrene (PCABS) are used to enable sequential morphing at their respective glass transition temperatures (105°C and 125°C). Structural bending is achieved through controlled longitudinal and lateral printing orientations, with geometry parameterized by width values for optimization. Tangent stiffness is maximized under a volume constraint using finite element method (FEM)-based transient thermal analysis, sensitivity evaluation, and gradient-based updates. Two application cases-a self-morphing table leg and a prosthetic leg-demonstrate the method. Optimized designs achieve up to a 28.18% increase in stiffness over initial designs. Fabricated prototypes are thermally actuated and compression-tested, showing less than 6% deviation from FEM predictions. These results validate the proposed framework as an effective approach for improving the performance of 4D-printed, multi-material morphing structures, with potential applications in adaptive and load-bearing systems.
- 2 February 2024
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 33 (3) , 035007
Multi-material 4D printing to realize two-phase morphing in self-actuating structures
4D printing has garnered significant attention within the field of engineering due to its capacity to introduce novel functionalities in printed structures through shape-morphing. Nevertheless, there persist challenges in the design and fabrication of intricate structures, primarily stemming from the intricate task of controlling variables that impact morphing characteristics. In order to surmount these hurdles, the approach of multi-material 4D printing is employed, underpinned by parametric studies, to actualize complex structures through a two-phase morphing process. This study specifically investigates the utilization of acrylonitrile butadiene styrene (ABS) and polycarbonate/ABS. The distinction in glass transition temperatures within these materials enables the realization of two distinct morphing phases. The research delves into the impact of structural parameters on morphing properties. Finite element analyses are subsequently conducted, leveraging the insights gained from parametric studies, to facilitate the accurate prediction of a diverse array of shape alterations in response to temperature fluctuations. Several structural models are both simulated and fabricated to experimentally validate the precise forecasting of desired morphing phases. The culmination of this study manifests in the design and fabrication of multiple multi-material structures, exemplifying both their functionality and intricate geometric complexity.
- 2 February 2024
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 33 (3) , 035007
Multi-material 4D printing to realize two-phase morphing in self-actuating structures
4D printing has garnered significant attention within the field of engineering due to its capacity to introduce novel functionalities in printed structures through shape-morphing. Nevertheless, there persist challenges in the design and fabrication of intricate structures, primarily stemming from the intricate task of controlling variables that impact morphing characteristics. In order to surmount these hurdles, the approach of multi-material 4D printing is employed, underpinned by parametric studies, to actualize complex structures through a two-phase morphing process. This study specifically investigates the utilization of acrylonitrile butadiene styrene (ABS) and polycarbonate/ABS. The distinction in glass transition temperatures within these materials enables the realization of two distinct morphing phases. The research delves into the impact of structural parameters on morphing properties. Finite element analyses are subsequently conducted, leveraging the insights gained from parametric studies, to facilitate the accurate prediction of a diverse array of shape alterations in response to temperature fluctuations. Several structural models are both simulated and fabricated to experimentally validate the precise forecasting of desired morphing phases. The culmination of this study manifests in the design and fabrication of multiple multi-material structures, exemplifying both their functionality and intricate geometric complexity.