Kevin Moreno Gata
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kevin Moreno Gata has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Florian Spahn
Lehrstuhl für Baustatik und Baudynamik, RWTH Aachen University
2 shared publications Martin Trautz
RWTH Aachen University
2 shared publications- Martin Trautz
RWTH Aachen University Lehrstuhl für Tragkonstruktionen Schinkelstraße 1 52062 Aachen
2 shared publications - Sven Klinkel
Chair of Structural Analysis and Dynamics, RWTH Aachen University, Aachen, Germany
2 shared publications Achim Menges
Stuttgart University
1 shared publicationAlex Seiter
Chair of Structures and Structural Design, RWTH Aachen University, Schinkelstr. 1, 52062 Aachen, Germany
1 shared publication
Latest Publications
- Open Access
- 10 January 2025
- Published by Cambridge University Press (CUP) in Research Directions: Biotechnology Design
- Vol. 3, e3
Geometrical analysis of naturally grown timber for the design of load-bearing structures – ERRATUM
- 10 January 2025
- Published by Cambridge University Press (CUP) in Research Directions: Biotechnology Design
- Vol. 3, e3
Open AccessGeometrical analysis of naturally grown timber for the design of load-bearing structures – ERRATUM
- Open Access
- 8 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23)
Function-Oriented Applicability Evaluation of Technical Folding Based on Expert Knowledge
Technical folding systems are rigid, three-dimensional surface structures that can be folded at their joints. Due to their foldable structure, technical folding systems can produce lightweight structures that have a high load-bearing capacity and can also flexibly change their shape. In order to develop products with technical folding in a function-oriented product development process, a folding principle must be defined that realises the individual functions. Since there is hardly any expert knowledge on technical folding, in general, and on the use of the technical folding principle in particular, technical folding is not very widespread despite its promising properties. Therefore, there is a need for a software-supported evaluation of whether functions can be realised by the principle of technical folding. The software-supported applicability evaluation (EvalTech) developed here is based on case-based reasoning methods, as these can artificially simulate evaluations based on expert knowledge. The expert knowledge used for the evaluation includes functions, function structures and properties of known technical folding systems, which are compared with functions and function structures of the development task. EvalTech was successfully used in the development and realisation of a large-scale foldable cover for industrial robots.
- 8 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23)
Open AccessFunction-Oriented Applicability Evaluation of Technical Folding Based on Expert Knowledge
Technical folding systems are rigid, three-dimensional surface structures that can be folded at their joints. Due to their foldable structure, technical folding systems can produce lightweight structures that have a high load-bearing capacity and can also flexibly change their shape. In order to develop products with technical folding in a function-oriented product development process, a folding principle must be defined that realises the individual functions. Since there is hardly any expert knowledge on technical folding, in general, and on the use of the technical folding principle in particular, technical folding is not very widespread despite its promising properties. Therefore, there is a need for a software-supported evaluation of whether functions can be realised by the principle of technical folding. The software-supported applicability evaluation (EvalTech) developed here is based on case-based reasoning methods, as these can artificially simulate evaluations based on expert knowledge. The expert knowledge used for the evaluation includes functions, function structures and properties of known technical folding systems, which are compared with functions and function structures of the development task. EvalTech was successfully used in the development and realisation of a large-scale foldable cover for industrial robots.
- Open Access
- 28 October 2024
- Published by Cambridge University Press (CUP) in Research Directions: Biotechnology Design
- Vol. 2, e19
Geometrical analysis of naturally grown timber for the design of load-bearing structures
Combining tradition and innovation, timber plays essential roles in building structures for architecture and engineering. Tree branching geometries and timber in its natural state often serve as sources of inspiration. However, the mechanical properties of naturally grown timber, inherently inconsistent and geometrically varied, remain insufficiently studied, particularly for construction and simulations. This knowledge gap perpetuates the prevalent use of straight, uniformly harvested timber while neglecting curved and bifurcated elements with smaller cross-sections. This research investigates the potential of naturally grown timber in structural design, emphasizing the importance of understanding the natural characteristics and growth patterns of trees to optimize timber use. The developed methodology leverages noninvasive technologies, such as computerized tomography (CT), to precisely capture the geometrical and material properties of wood. These data sources are then integrated to visualize cross-sectional geometries and material properties, forming the basis for our analytical approach. Utilizing generalized scaled boundary isogeometric analysis, the methodology enhances the accuracy and efficiency of simulations, aligning structural design with natural growth principles. This approach not only fosters sustainable resource practices by promoting the use of major tree parts but also transforms discarded materials into valuable resources. The paper concludes with a demonstration of this methodology applied in a practical construction scenario.
- 28 October 2024
- Published by Cambridge University Press (CUP) in Research Directions: Biotechnology Design
- Vol. 2, e19
Open AccessGeometrical analysis of naturally grown timber for the design of load-bearing structures
Combining tradition and innovation, timber plays essential roles in building structures for architecture and engineering. Tree branching geometries and timber in its natural state often serve as sources of inspiration. However, the mechanical properties of naturally grown timber, inherently inconsistent and geometrically varied, remain insufficiently studied, particularly for construction and simulations. This knowledge gap perpetuates the prevalent use of straight, uniformly harvested timber while neglecting curved and bifurcated elements with smaller cross-sections. This research investigates the potential of naturally grown timber in structural design, emphasizing the importance of understanding the natural characteristics and growth patterns of trees to optimize timber use. The developed methodology leverages noninvasive technologies, such as computerized tomography (CT), to precisely capture the geometrical and material properties of wood. These data sources are then integrated to visualize cross-sectional geometries and material properties, forming the basis for our analytical approach. Utilizing generalized scaled boundary isogeometric analysis, the methodology enhances the accuracy and efficiency of simulations, aligning structural design with natural growth principles. This approach not only fosters sustainable resource practices by promoting the use of major tree parts but also transforms discarded materials into valuable resources. The paper concludes with a demonstration of this methodology applied in a practical construction scenario.
- 30 August 2024
- Published by Springer Nature
- p. 81-93
Integrating Naturally Grown Timber in Sandwich Timber Panels
- 30 August 2024
- Published by Springer Nature
- p. 81-93
Integrating Naturally Grown Timber in Sandwich Timber Panels
- Open Access
- 2 February 2024
- Published by Open Engineering Inc in engrXiv
Geometrical analysis of naturally grown timber for the design of load-bearing structures
Combining tradition and innovation, timber plays essential roles in building structures for architecture and engineering. Tree branching geometries and timber in natural state often serve as sources of inspiration. However, the mechanical properties of naturally grown timber, inherently inconsistent and geometrically varied, remain insufficiently studied, particularly for construction and simulations. This knowledge gap perpetuates the prevalent use of straight, uniformly harvested timber, while neglecting curved and bifurcated elements with smaller cross-sections. This research investigates the potential of naturally grown timber in structural design. The central idea emphasizes that a thorough understanding of the natural characteristics and growth patterns of trees can improve how we use timber. This methodology is developed to facilitate the design of structures that align with natural growth principles. Utilizing non-invasive, such as Computerized Tomography (CT), precise geometrical and material properties of wood can be obtained. This work combines these data sources to visualize cross-sectional geometries and material properties. The methodology integrates an analytical approach based on Generalized Scaled Boundary Isogeometric Analysis, enhancing the accuracy and efficiency of simulations. This approach fosters sustainable resource practices, and promotes the use of major tree parts, transforming discarded material into valuable resources. This paper concludes with a practical application through a construction demonstration.
- 2 February 2024
- Published by Open Engineering Inc in engrXiv
Open AccessGeometrical analysis of naturally grown timber for the design of load-bearing structures
Combining tradition and innovation, timber plays essential roles in building structures for architecture and engineering. Tree branching geometries and timber in natural state often serve as sources of inspiration. However, the mechanical properties of naturally grown timber, inherently inconsistent and geometrically varied, remain insufficiently studied, particularly for construction and simulations. This knowledge gap perpetuates the prevalent use of straight, uniformly harvested timber, while neglecting curved and bifurcated elements with smaller cross-sections. This research investigates the potential of naturally grown timber in structural design. The central idea emphasizes that a thorough understanding of the natural characteristics and growth patterns of trees can improve how we use timber. This methodology is developed to facilitate the design of structures that align with natural growth principles. Utilizing non-invasive, such as Computerized Tomography (CT), precise geometrical and material properties of wood can be obtained. This work combines these data sources to visualize cross-sectional geometries and material properties. The methodology integrates an analytical approach based on Generalized Scaled Boundary Isogeometric Analysis, enhancing the accuracy and efficiency of simulations. This approach fosters sustainable resource practices, and promotes the use of major tree parts, transforming discarded material into valuable resources. This paper concludes with a practical application through a construction demonstration.