Zhiyu Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhiyu Xiao has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
Jiantao Zhang
6 shared publicationsHao Tang
5 shared publicationsXingyi Li
5 shared publicationsXiao Liu
3 shared publicationsXiaoying Xi
National Metal Near Net Forming Engineering Technology Research Center, South China University of Technology, Guangzhou, China
3 shared publicationsYanyi Wu
3 shared publications
Latest Publications
- Open Access
Spatial Distribution and Local Coordination Regulation of Nano-Oxide-Modified Si–O Interfaces in FeSiAl Soft Magnetic Composites
Existing strategies for modifying soft magnetic composites (SMCs) with nano-oxides primarily rely on their high electrical resistivity, with limited attention paid to interfacial coupling between the nano-oxides and the insulating matrix. This study proposes a high-temperature annealing strategy to regulate the spatial distribution and local coordination of nano-oxide-modified Si–O interfaces by incorporating Al2O3 and CeO2 into a silicone resin coating system, thereby harnessing their potential for interfacial modification at elevated temperatures. After annealing at 800 °C, the silicone resin forms an inorganic insulating interface characterized by an amorphous Si–O-rich network. The incorporation of Al2O3 and CeO2 alters the spatial distribution of the insulating interface and generates Si–O–Al/Al–O- and Si–O–Ce/Ce–O-related oxygen environments, respectively, thereby regulating the local coordination of the Si–O network. Al2O3 modification facilitates core-loss reduction, with the sample containing 0.5 wt.% Al2O3 achieving a core loss of 144.31 mW/cm3 at 100 kHz and 50 mT. In contrast, CeO2 incorporation is more favorable for maintaining high effective permeability, with the sample containing 1 wt.% CeO2 achieving a value of 97.88 at 100 kHz. These findings provide insights into the relationships among interfacial spatial distribution, local coordination, and high-frequency magnetic properties, offering guidance for the design of high-temperature composite insulating interfaces for FeSiAl SMCs.
Open AccessSpatial Distribution and Local Coordination Regulation of Nano-Oxide-Modified Si–O Interfaces in FeSiAl Soft Magnetic Composites
Existing strategies for modifying soft magnetic composites (SMCs) with nano-oxides primarily rely on their high electrical resistivity, with limited attention paid to interfacial coupling between the nano-oxides and the insulating matrix. This study proposes a high-temperature annealing strategy to regulate the spatial distribution and local coordination of nano-oxide-modified Si–O interfaces by incorporating Al2O3 and CeO2 into a silicone resin coating system, thereby harnessing their potential for interfacial modification at elevated temperatures. After annealing at 800 °C, the silicone resin forms an inorganic insulating interface characterized by an amorphous Si–O-rich network. The incorporation of Al2O3 and CeO2 alters the spatial distribution of the insulating interface and generates Si–O–Al/Al–O- and Si–O–Ce/Ce–O-related oxygen environments, respectively, thereby regulating the local coordination of the Si–O network. Al2O3 modification facilitates core-loss reduction, with the sample containing 0.5 wt.% Al2O3 achieving a core loss of 144.31 mW/cm3 at 100 kHz and 50 mT. In contrast, CeO2 incorporation is more favorable for maintaining high effective permeability, with the sample containing 1 wt.% CeO2 achieving a value of 97.88 at 100 kHz. These findings provide insights into the relationships among interfacial spatial distribution, local coordination, and high-frequency magnetic properties, offering guidance for the design of high-temperature composite insulating interfaces for FeSiAl SMCs.
- Open Access
- 16 February 2026
- Published by Elsevier in Materials & Design
- Vol. 264
Dislocation-density-enhanced passivation of 2205 duplex stainless steel via laser shock peening: first-principles insights
- 16 February 2026
- Published by Elsevier in Materials & Design
- Vol. 264
Open AccessDislocation-density-enhanced passivation of 2205 duplex stainless steel via laser shock peening: first-principles insights
- Open Access
- 24 December 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 40, 1680-1693
Corrosion behavior of sintered duplex stainless steel manufactured from gas-atomized powders discarded from laser powder bed fusion
- 24 December 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 40, 1680-1693
Open AccessCorrosion behavior of sintered duplex stainless steel manufactured from gas-atomized powders discarded from laser powder bed fusion
- 3 November 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (13) , 12883-12900
Influence of Ultrasonic Surface Rolling Process on Surface Integrity and Internal Porosity in Selective Laser Melted CP-Ti
- 3 November 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (13) , 12883-12900
Influence of Ultrasonic Surface Rolling Process on Surface Integrity and Internal Porosity in Selective Laser Melted CP-Ti
- 27 September 2024
- Published by Elsevier in Materials Letters
- Vol. 377
Stress-induced microstructural evolution of martensite in additive manufactured Cu-13Al-4Mn shape memory alloy
- 27 September 2024
- Published by Elsevier in Materials Letters
- Vol. 377
Stress-induced microstructural evolution of martensite in additive manufactured Cu-13Al-4Mn shape memory alloy
- Open Access
- 26 January 2024
- Published by Elsevier in Additive Manufacturing Letters
- Vol. 9
Achieving ultra-high strength of laser powder bed fusion TiN nanoparticles reinforced AlMnMgScZr composite via a high volume density of L12-nanoprecipitates
- 26 January 2024
- Published by Elsevier in Additive Manufacturing Letters
- Vol. 9
Open AccessAchieving ultra-high strength of laser powder bed fusion TiN nanoparticles reinforced AlMnMgScZr composite via a high volume density of L12-nanoprecipitates
- 29 January 2021
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 865, 158927
Lamellar-structured Al-based alloys with high strength and plasticity
- 29 January 2021
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 865, 158927
Lamellar-structured Al-based alloys with high strength and plasticity
- 4 March 2020
- Published by Springer Nature in Metals and Materials International
- Vol. 27 (8) , 2550-2561
Microstructure, Anisotropic Mechanical Properties and Very High Cycle Fatigue Behavior of Ti6Al4V Produced by Selective Electron Beam Melting
- 4 March 2020
- Published by Springer Nature in Metals and Materials International
- Vol. 27 (8) , 2550-2561
Microstructure, Anisotropic Mechanical Properties and Very High Cycle Fatigue Behavior of Ti6Al4V Produced by Selective Electron Beam Melting
- Open Access
Influence of Ultrasonic Surface Rolling on Microstructure and Wear Behavior of Selective Laser Melted Ti-6Al-4V Alloy
The present article studied the effect of ultrasonic surface rolling process (USRP) on the microstructure and wear behavior of a selective laser melted Ti-6Al-4V alloy. Surface characteristics were investigated using optical microscope, nano-indentation, scanning electron microscope, transmission electron microscope and laser scanning confocal microscope. Results indicated that the thickness of pore-free surfaces increased to 100~200 μm with the increasing ultrasonic surface rolling numbers. Severe work hardening occurred in the densified layer, resulting in the formation of refined grains, dislocation walls and deformation twins. After 1000 N 6 passes, about 15.5% and 14.1% increment in surficial Nano-hardness and Vickers-hardness was obtained, respectively. The hardness decreased gradually from the top surface to the substrate. Wear tests revealed that the friction coefficient declined from 0.74 (polished surface) to 0.64 (USRP treated surface) and the wear volume reduced from 0.205 mm−3 to 0.195 mm−3. The difference in wear volume between USRP treated and polished samples increased with sliding time. The enhanced wear resistance was concluded to be associated with the improvement of hardness and shear resistance and also the inhibition of delamination initiation.
Open AccessInfluence of Ultrasonic Surface Rolling on Microstructure and Wear Behavior of Selective Laser Melted Ti-6Al-4V Alloy
The present article studied the effect of ultrasonic surface rolling process (USRP) on the microstructure and wear behavior of a selective laser melted Ti-6Al-4V alloy. Surface characteristics were investigated using optical microscope, nano-indentation, scanning electron microscope, transmission electron microscope and laser scanning confocal microscope. Results indicated that the thickness of pore-free surfaces increased to 100~200 μm with the increasing ultrasonic surface rolling numbers. Severe work hardening occurred in the densified layer, resulting in the formation of refined grains, dislocation walls and deformation twins. After 1000 N 6 passes, about 15.5% and 14.1% increment in surficial Nano-hardness and Vickers-hardness was obtained, respectively. The hardness decreased gradually from the top surface to the substrate. Wear tests revealed that the friction coefficient declined from 0.74 (polished surface) to 0.64 (USRP treated surface) and the wear volume reduced from 0.205 mm−3 to 0.195 mm−3. The difference in wear volume between USRP treated and polished samples increased with sliding time. The enhanced wear resistance was concluded to be associated with the improvement of hardness and shear resistance and also the inhibition of delamination initiation.