Jen-Hsien Huang
Research Subjects
Jen-Hsien Huang has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Huei Chu Weng
Department of Mechanical Engineering, Chung Yuan Christian University, No. 200, Chungpei Road, Chungli District, Taoyuan City 32023, Taiwan
7 shared publications Kuen-Chan Lee
6 shared publicationsShih-Chieh Hsu
6 shared publications- Wei Kong Pang
University of Wollongong
6 shared publications Wei Kong Pang
5 shared publications- Yu-Sheng Hsiao
Department of Materials Science and Engineering National Taiwan University of Science and Technology Taipei Taiwan
5 shared publications
Latest Publications
- Open Access
- 9 July 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (14) , 7066-7073
Solid-Solution Lithium Intercalation and Magnetic Insights in Core–Shell LiNi x Mn2-xO4 Cathodes
To achieve high-energy-density lithium-ion batteries, the development of high-voltage cathode materials remains a critical challenge. Although LiNixMn2-xO4 (LNMO) exhibits an intrinsically high operating voltage, its practical application is hindered by structural instability and interfacial degradation. In this study, core–shell LNMO cathodes with tunable Ni/Mn distributions were designed to regulate structural and electronic properties and enhance electrochemical performance. Three configurations (AC, AB, and BA) were synthesized and systematically investigated. Among them, the LNMO-AC sample exhibits a highly disordered spinel structure with a uniform nanoscale shell and reduced particle aggregation. X-ray absorption near-edge structure (XANES) analysis reveals composition-dependent variations in Mn valence states, while electron magnetic resonance (EMR) and superconducting quantum interference device (SQUID) measurements suggest distinct magnetic responses associated with local structural heterogeneity and defect-induced interactions. Operando X-ray diffraction (XRD) and electrochemical measurements indicate that lithium intercalation in LNMO-AC tends to follow a more continuous, solid-solution-like reaction behavior compared to the pristine sample, which contributes to improved structural stability during cycling. The enhanced electrochemical performance is attributed to the synergistic effect of a disordered core facilitating lithium transport and a structurally stable shell suppressing interfacial degradation. These findings highlight the interplay between cation disorder, magnetic behavior, and electrochemical functionality, providing insights into the rational design of high-voltage LNMO cathodes for advanced lithium-ion batteries.
- 9 July 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (14) , 7066-7073
Open AccessSolid-Solution Lithium Intercalation and Magnetic Insights in Core–Shell LiNi x Mn2-xO4 Cathodes
To achieve high-energy-density lithium-ion batteries, the development of high-voltage cathode materials remains a critical challenge. Although LiNixMn2-xO4 (LNMO) exhibits an intrinsically high operating voltage, its practical application is hindered by structural instability and interfacial degradation. In this study, core–shell LNMO cathodes with tunable Ni/Mn distributions were designed to regulate structural and electronic properties and enhance electrochemical performance. Three configurations (AC, AB, and BA) were synthesized and systematically investigated. Among them, the LNMO-AC sample exhibits a highly disordered spinel structure with a uniform nanoscale shell and reduced particle aggregation. X-ray absorption near-edge structure (XANES) analysis reveals composition-dependent variations in Mn valence states, while electron magnetic resonance (EMR) and superconducting quantum interference device (SQUID) measurements suggest distinct magnetic responses associated with local structural heterogeneity and defect-induced interactions. Operando X-ray diffraction (XRD) and electrochemical measurements indicate that lithium intercalation in LNMO-AC tends to follow a more continuous, solid-solution-like reaction behavior compared to the pristine sample, which contributes to improved structural stability during cycling. The enhanced electrochemical performance is attributed to the synergistic effect of a disordered core facilitating lithium transport and a structurally stable shell suppressing interfacial degradation. These findings highlight the interplay between cation disorder, magnetic behavior, and electrochemical functionality, providing insights into the rational design of high-voltage LNMO cathodes for advanced lithium-ion batteries.
- Open Access
- 10 April 2026
- Published by Elsevier in Results in Physics
- Vol. 85
In situ formation of a Bi2MoO6/Bi2O3 p–n composite for enhanced photocatalytic activity and energy storage
- 10 April 2026
- Published by Elsevier in Results in Physics
- Vol. 85
Open AccessIn situ formation of a Bi2MoO6/Bi2O3 p–n composite for enhanced photocatalytic activity and energy storage
- Open Access
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Hierarchical Microtubular Poly(hydroxymethyl-3,4-ethylenedioxythiophene) Electrodes for Enhanced Performance in Vanadium Redox Flow Batteries
Vanadium redox flow batteries (VRFBs) have garnered significant investigation for their potential in advancing large-scale energy storage systems (ESSs). However, utilizing commercial graphite felt (GF) to fabricate high-performance VRFBs remains challenging due to its inherent high hydrophobicity, low surface area, and poor electrocatalytic activity. Developing a scalable and efficient process to modify GF electrodes with improved kinetics and electrocatalytic capabilities is essential for advancing high-performance VRFBs. In this study, poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PEDOT-OH) microtube decorated GFs have been prepared via a template-free electropolymerization route. The modified GFs exhibit enhanced kinetics due to the excellent hydrophilicity and mace-like hierarchical structure of the PEDOT-OH decoration, offering a larger interfacial area for ion accommodation. Furthermore, the decorated PEDOT-OH microstructure also show an improved electrocatalytic activity towards both the V3+/V2+ and VO2+/VO2+ redox reactions. Thus, the VRFB with the mace-like hierarchical PEDOT-OH/GF felt reaches a high energy efficiency (EE) of 84.6% at 40 mA/cm2, representing an 11.3% increase relative to the bare electrode. In addition, the PEDOT-OH decorated GFs also display remarkable rate performance and stability during long-term operation, maintaining a capacity retention of 91.8% over 100 cycles.
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHierarchical Microtubular Poly(hydroxymethyl-3,4-ethylenedioxythiophene) Electrodes for Enhanced Performance in Vanadium Redox Flow Batteries
Vanadium redox flow batteries (VRFBs) have garnered significant investigation for their potential in advancing large-scale energy storage systems (ESSs). However, utilizing commercial graphite felt (GF) to fabricate high-performance VRFBs remains challenging due to its inherent high hydrophobicity, low surface area, and poor electrocatalytic activity. Developing a scalable and efficient process to modify GF electrodes with improved kinetics and electrocatalytic capabilities is essential for advancing high-performance VRFBs. In this study, poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PEDOT-OH) microtube decorated GFs have been prepared via a template-free electropolymerization route. The modified GFs exhibit enhanced kinetics due to the excellent hydrophilicity and mace-like hierarchical structure of the PEDOT-OH decoration, offering a larger interfacial area for ion accommodation. Furthermore, the decorated PEDOT-OH microstructure also show an improved electrocatalytic activity towards both the V3+/V2+ and VO2+/VO2+ redox reactions. Thus, the VRFB with the mace-like hierarchical PEDOT-OH/GF felt reaches a high energy efficiency (EE) of 84.6% at 40 mA/cm2, representing an 11.3% increase relative to the bare electrode. In addition, the PEDOT-OH decorated GFs also display remarkable rate performance and stability during long-term operation, maintaining a capacity retention of 91.8% over 100 cycles.
- Open Access
- 6 February 2026
- Published by Elsevier in SSRN Electronic Journal
In Situ Formation of Bi2MoO6/Bi2O3 p–n Composite for Enhanced Photocatalytic Activity and Energy Storage
Heterostructured materials composed of distinct semiconductors can generate built-in electric fields and provide additional active sites, thereby enhancing electron/ion transport and redox reactions for energy storage and photocatalytic applications. In this study, a novel strategy is proposed involving the growth of Bi2MoO6 on preformed Bi2O3 particles to construct a p–n Bi2O3/Bi2MoO6 heterojunction. The established internal electrostatic field (EIEF) between p-type Bi2O3 and n-type Bi2MoO6, in conjunction with oxygen vacancy-induced defects, facilitates charge transfer and enhances electrochemical activity. As a result, the energy-related applications of Bi2O3/Bi2MoO6, both as a supercapacitor and anode electrode, outperform those of pristine Bi2O3. The asymmetric supercapacitor (AS) based on Bi2O3/Bi2MoO6 and activated carbon (AC) exhibits superior electrochemical performance, with an energy density of 31.0 Wh/kg and outstanding cycling durability, retaining 92.7% of its initial capacity after 10 000 cycles. The Bi2O3/Bi2MoO6 heterojunction also demonstrates an increased photodegradation rate constant toward methylene blue (MB) under illumination with visible light, primarily due to its great charge transfer property.
- 6 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessIn Situ Formation of Bi2MoO6/Bi2O3 p–n Composite for Enhanced Photocatalytic Activity and Energy Storage
Heterostructured materials composed of distinct semiconductors can generate built-in electric fields and provide additional active sites, thereby enhancing electron/ion transport and redox reactions for energy storage and photocatalytic applications. In this study, a novel strategy is proposed involving the growth of Bi2MoO6 on preformed Bi2O3 particles to construct a p–n Bi2O3/Bi2MoO6 heterojunction. The established internal electrostatic field (EIEF) between p-type Bi2O3 and n-type Bi2MoO6, in conjunction with oxygen vacancy-induced defects, facilitates charge transfer and enhances electrochemical activity. As a result, the energy-related applications of Bi2O3/Bi2MoO6, both as a supercapacitor and anode electrode, outperform those of pristine Bi2O3. The asymmetric supercapacitor (AS) based on Bi2O3/Bi2MoO6 and activated carbon (AC) exhibits superior electrochemical performance, with an energy density of 31.0 Wh/kg and outstanding cycling durability, retaining 92.7% of its initial capacity after 10 000 cycles. The Bi2O3/Bi2MoO6 heterojunction also demonstrates an increased photodegradation rate constant toward methylene blue (MB) under illumination with visible light, primarily due to its great charge transfer property.
- 16 December 2025
- Published by Elsevier in Applied Surface Science
- Vol. 723
Interfacial surface modification of Li4Ti5O12 anodes for enhanced electrochemical performance
- 16 December 2025
- Published by Elsevier in Applied Surface Science
- Vol. 723
Interfacial surface modification of Li4Ti5O12 anodes for enhanced electrochemical performance
- 4 April 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 489
Advancing Li3VO4 as a high-performance anode material for use in lithium-ion batteries and lithium-ion capacitors
- 4 April 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 489
Advancing Li3VO4 as a high-performance anode material for use in lithium-ion batteries and lithium-ion capacitors