Chao Li
Research Subjects
Chao Li has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Guo-Qiang Lo
Advance Micro Foundry, Pte Ltd 2 , 11 Science Park Road, Science Park II, Singapore 117685
4 shared publications - Shawn Wu Xie
Advanced Micro Foundry, Singapore
3 shared publications - Feng Gao
Advanced Micro Foundry Pte Ltd., 11 Science Park Road, Singapore 117685, Singapore
2 shared publications - James You Sian Tan
Advanced Micro Foundry, Singapore
2 shared publications - Xianshu Luo
Advanced Micro Foundry Pte Ltd
2 shared publications - Alexander Janta-Polczynski
IBM Bromont, Bromont, QC, Canada
1 shared publication
Latest Publications
- Open Access
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1979-1986
1.6 Tbps FOWLP-Based Silicon Photonic Engine for Co-Packaged Optics
Co-packaged optics (CPO) has emerged as a promising solution to address the limitations of traditional pluggable optical transceivers, offering enhanced bandwidth, improved energy efficiency, and reduced signal loss. This paper presents a low-cost, volume-manufacturable Fan-Out Wafer Level Packaging (FOWLP) silicon photonic engine with an aggregate data transmission capacity of 1.79 Tbps (8 x 224 Gbps). The FOWLP platform enables the seamless integration of Electronic ICs (EICs) and Photonic ICs (PICs) without wire bonds, preserving signal integrity and minimizing losses. By demonstrating 112 Gbaud NRZ (112 Gbps/λ) and PAM4 (224 Gbps/λ) transmission with minimal digital signal processing, this work highlights the potential of silicon photonics for 200 Gbps/λ Co-Packaged Optics (CPO) and Linear Pluggable Optics (LPO) applications. The findings underscore the enhanced signal integrity, power efficiency, and reduced latency achieved with FOWLP, addressing critical bottlenecks in hyperscale data centers and AI/ML clusters.
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1979-1986
Open Access1.6 Tbps FOWLP-Based Silicon Photonic Engine for Co-Packaged Optics
Co-packaged optics (CPO) has emerged as a promising solution to address the limitations of traditional pluggable optical transceivers, offering enhanced bandwidth, improved energy efficiency, and reduced signal loss. This paper presents a low-cost, volume-manufacturable Fan-Out Wafer Level Packaging (FOWLP) silicon photonic engine with an aggregate data transmission capacity of 1.79 Tbps (8 x 224 Gbps). The FOWLP platform enables the seamless integration of Electronic ICs (EICs) and Photonic ICs (PICs) without wire bonds, preserving signal integrity and minimizing losses. By demonstrating 112 Gbaud NRZ (112 Gbps/λ) and PAM4 (224 Gbps/λ) transmission with minimal digital signal processing, this work highlights the potential of silicon photonics for 200 Gbps/λ Co-Packaged Optics (CPO) and Linear Pluggable Optics (LPO) applications. The findings underscore the enhanced signal integrity, power efficiency, and reduced latency achieved with FOWLP, addressing critical bottlenecks in hyperscale data centers and AI/ML clusters.
- 14 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (3) , 1062-1074
Foundry's Perspective on Laser and SOA Module Integration With Silicon Photonics
Silicon photonic integrated circuit (PIC) builds on the demand for a low cost PIC approach from established silicon-based manufacturing infrastructure traditionally built for electronics. Besides its natural abundance, silicon has desirable properties such as optically low loss (at certain critical wavelengths), and small form factor to enable high density scaled-up optical on-chip circuitry. However, given that silicon is an indirect bandgap material, the platform is typically integrated with other direct bandgap (e.g., III-V semiconductor) platforms for on-chip light source. An effective solution to integrating light source onto silicon photonics platform is integral to a practical scaled-up and full-fledged integrated photonics implementation. Here, we discuss the integration solutions, and present our foundry's perspective toward realizing it.
- 14 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (3) , 1062-1074
Foundry's Perspective on Laser and SOA Module Integration With Silicon Photonics
Silicon photonic integrated circuit (PIC) builds on the demand for a low cost PIC approach from established silicon-based manufacturing infrastructure traditionally built for electronics. Besides its natural abundance, silicon has desirable properties such as optically low loss (at certain critical wavelengths), and small form factor to enable high density scaled-up optical on-chip circuitry. However, given that silicon is an indirect bandgap material, the platform is typically integrated with other direct bandgap (e.g., III-V semiconductor) platforms for on-chip light source. An effective solution to integrating light source onto silicon photonics platform is integral to a practical scaled-up and full-fledged integrated photonics implementation. Here, we discuss the integration solutions, and present our foundry's perspective toward realizing it.
- 1 January 2023
- Published by Optica Publishing Group
- p. Th3B.3
Foundry’s Perspective on Laser and SOA Module Integration with Si-Photonics
An effective solution to integrating light source onto silicon photonics platform would be highly useful. Here, we discuss the integration solutions (i.e., hetero-epitaxial, heterogeneous and hybrid integration) and present foundry’s perspective toward implementing of such.
- 1 January 2023
- Published by Optica Publishing Group
- p. Th3B.3
Foundry’s Perspective on Laser and SOA Module Integration with Si-Photonics
An effective solution to integrating light source onto silicon photonics platform would be highly useful. Here, we discuss the integration solutions (i.e., hetero-epitaxial, heterogeneous and hybrid integration) and present foundry’s perspective toward implementing of such.
- Open Access
- 8 November 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (11) , 1925
Thermo-Optic Phase Shifter with Interleaved Suspended Design for Power Efficiency and Speed Adjustment
Conventional thermo-optic devices—which can be broadly categorized to that with and without a thermal isolation trench—typically come with a tradeoff between thermal tuning efficiency and tuning speed. Here, we propose a method that allows us to directly define the tradeoff using a specially designed thermo-optic phase shifter with an interleaved isolation trench. With the design, the tuning efficiency and speed can be precisely tailored simply by controlling the duty ratio (suspended length over total heater length) of the suspended design. Phase shifters are one of the main components in photonic-integrated circuits, and having phase shifters with a flexible design approach may enable the wide adoption of photonic applications such as an optical neural network and LiDAR.
- 8 November 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (11) , 1925
Open AccessThermo-Optic Phase Shifter with Interleaved Suspended Design for Power Efficiency and Speed Adjustment
Conventional thermo-optic devices—which can be broadly categorized to that with and without a thermal isolation trench—typically come with a tradeoff between thermal tuning efficiency and tuning speed. Here, we propose a method that allows us to directly define the tradeoff using a specially designed thermo-optic phase shifter with an interleaved isolation trench. With the design, the tuning efficiency and speed can be precisely tailored simply by controlling the duty ratio (suspended length over total heater length) of the suspended design. Phase shifters are one of the main components in photonic-integrated circuits, and having phase shifters with a flexible design approach may enable the wide adoption of photonic applications such as an optical neural network and LiDAR.
- Open Access
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (21) , 1139-1142
Net 67 Gbps Transmission Over 2 km at Sub 1 Vpp Using Packaged Silicon Photonic MZM
In this work, IBM, CMC, AMF, and McGill University work together to verify a simplified packaging scheme for Si-photonic devices based on incorporating IBM’s polymer photonic interface into AMF’s Si-photonic fabrication process flow. The proposed procedure is used in packaging an O-band Si-photonic traveling wave Mach-Zehnder modulator (TW-MZM) yielding a fiber-to-fiber insertion loss of 16.5 dB and 16 GHz 3-dB bandwidth. Employing the packaged module without RF or optical amplification, we demonstrate the transmission of 28 Gbaud PAM4 (net 53 Gbps) over 2 km of SSMF using a linear feed-forward equalizer below the 2.4×10 -4 KP4-FEC BER threshold with 750 mVpp, and under the 3.8×10 -3 HD-FEC threshold at 500 mVpp. Besides, we transmit 36 Gbaud (net 67 Gbps) under HD-FEC at 830 mVpp. Operating with an RF driver; we transmit 70 Gbaud PAM4 below HD-FEC, which corresponds to a net rate of 131 Gbps. The achieved transmission performance highlights the potential of the proposed packaging scheme.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (21) , 1139-1142
Open AccessNet 67 Gbps Transmission Over 2 km at Sub 1 Vpp Using Packaged Silicon Photonic MZM
In this work, IBM, CMC, AMF, and McGill University work together to verify a simplified packaging scheme for Si-photonic devices based on incorporating IBM’s polymer photonic interface into AMF’s Si-photonic fabrication process flow. The proposed procedure is used in packaging an O-band Si-photonic traveling wave Mach-Zehnder modulator (TW-MZM) yielding a fiber-to-fiber insertion loss of 16.5 dB and 16 GHz 3-dB bandwidth. Employing the packaged module without RF or optical amplification, we demonstrate the transmission of 28 Gbaud PAM4 (net 53 Gbps) over 2 km of SSMF using a linear feed-forward equalizer below the 2.4×10 -4 KP4-FEC BER threshold with 750 mVpp, and under the 3.8×10 -3 HD-FEC threshold at 500 mVpp. Besides, we transmit 36 Gbaud (net 67 Gbps) under HD-FEC at 830 mVpp. Operating with an RF driver; we transmit 70 Gbaud PAM4 below HD-FEC, which corresponds to a net rate of 131 Gbps. The achieved transmission performance highlights the potential of the proposed packaging scheme.
- Top Cited PapersOpen Access
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (13) , 4374-4389
Review of Silicon Photonics Technology and Platform Development
Many breakthroughs in the laboratories often do not bridge the gap between research and commercialization. However, silicon photonics bucked the trend, with industry observers estimating the commercial market to close in on a billion dollars in 2020. Silicon photonics leverages the billions of dollars and decades of research poured into silicon semiconductor device processing to enable high yield, robust processing, and most of all, low cost. Silicon is also a good optical material, with transparency in the commercially important infrared wavelength bands, and is a suitable platform for large-scale photonic integrated circuits. Silicon photonics is therefore slated to address the world's ever-increasing needs for bandwidth. It is part of an emerging ecosystem which includes designers, foundries, and integrators. In this paper, we review most of the foundries that presently enable silicon photonics integrated circuits fabrication. Some of these are pilot lines of major research institutes, and others are fully commercial pure-play foundries. Since silicon photonics has been commercially active for some years, foundries have released process design kits (PDK) that contain a standard device library. These libraries represent optimized and well-tested photonic elements, whose performance reflects the stability and maturity of the integration platforms. We will document the early works in silicon photonics, as well as its commercial status. We will provide a comprehensive review of the development of silicon photonics and the foundry services which enable the productization, including various efforts to develop and release PDK devices. In this context, we will report the long-standing efforts and contributions that previously IME/A*STAR and now AMF has dedicated to accelerating this journey.
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (13) , 4374-4389
Top Cited PapersOpen AccessReview of Silicon Photonics Technology and Platform Development
Many breakthroughs in the laboratories often do not bridge the gap between research and commercialization. However, silicon photonics bucked the trend, with industry observers estimating the commercial market to close in on a billion dollars in 2020. Silicon photonics leverages the billions of dollars and decades of research poured into silicon semiconductor device processing to enable high yield, robust processing, and most of all, low cost. Silicon is also a good optical material, with transparency in the commercially important infrared wavelength bands, and is a suitable platform for large-scale photonic integrated circuits. Silicon photonics is therefore slated to address the world's ever-increasing needs for bandwidth. It is part of an emerging ecosystem which includes designers, foundries, and integrators. In this paper, we review most of the foundries that presently enable silicon photonics integrated circuits fabrication. Some of these are pilot lines of major research institutes, and others are fully commercial pure-play foundries. Since silicon photonics has been commercially active for some years, foundries have released process design kits (PDK) that contain a standard device library. These libraries represent optimized and well-tested photonic elements, whose performance reflects the stability and maturity of the integration platforms. We will document the early works in silicon photonics, as well as its commercial status. We will provide a comprehensive review of the development of silicon photonics and the foundry services which enable the productization, including various efforts to develop and release PDK devices. In this context, we will report the long-standing efforts and contributions that previously IME/A*STAR and now AMF has dedicated to accelerating this journey.