Hang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hang Yang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Jiaqiang Jing
School of Oil & Natural Gas Engineering, Southwest Petroleum University, Chengdu, China
3 shared publications Jie Sun
3 shared publications- Qian Huang
School of Petroleum Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
3 shared publications - Xueyuan Long
School of Petroleum Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
3 shared publications - Jiang Meng
School of Petroleum Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
2 shared publications Jiatong Tan
School of Oil & Natural Gas Engineering, Southwest Petroleum University, Chengdu, China
2 shared publications
Latest Publications
- Open Access
Numerical Simulation Analysis of the Impact of Forest Wildfire on Buried Pipelines
In recent years, forest fires have occurred frequently, and extremely high temperatures can easily cause plastic deformation of buried pipelines. To clarify the temperature-stress variation law of natural gas pipelines under wildfire action, this study, based on heat transfer theory and using the finite element method, constructs a numerical model of a buried pipeline and analyzes the thermo-mechanical sequential coupling behavior of the pipe–soil system. It elucidates the influence patterns of key factors such as burial depth, outer diameter, internal fluid pressure, soil thermal conductivity, and fire duration on the temperature-stress fields of the pipe and surrounding soil and investigates pipeline deformation under fire. The results show that burial depth is the most sensitive factor: when it increases from 0.2 m to 0.8 m, the maximum pipe temperature decreases from 291.4 °C to 32.4 °C, and the maximum von Mises stress decreases from 507 MPa to 236 MPa. Furthermore, increasing pipe outer diameter and soil thermal conductivity both exacerbate pipe temperature rise and stress accumulation. Meanwhile, the longer the duration, the more pronounced the soil heat storage lag. Additionally, when internal pressure increases from 2 MPa to 8 MPa, the pipe’s maximum stress increases by up to 10.8%. The analysis results can provide a theoretical basis for identifying high-risk pipeline sections and guiding route selection and protective measure optimization for pipelines crossing forested areas.
Open AccessNumerical Simulation Analysis of the Impact of Forest Wildfire on Buried Pipelines
In recent years, forest fires have occurred frequently, and extremely high temperatures can easily cause plastic deformation of buried pipelines. To clarify the temperature-stress variation law of natural gas pipelines under wildfire action, this study, based on heat transfer theory and using the finite element method, constructs a numerical model of a buried pipeline and analyzes the thermo-mechanical sequential coupling behavior of the pipe–soil system. It elucidates the influence patterns of key factors such as burial depth, outer diameter, internal fluid pressure, soil thermal conductivity, and fire duration on the temperature-stress fields of the pipe and surrounding soil and investigates pipeline deformation under fire. The results show that burial depth is the most sensitive factor: when it increases from 0.2 m to 0.8 m, the maximum pipe temperature decreases from 291.4 °C to 32.4 °C, and the maximum von Mises stress decreases from 507 MPa to 236 MPa. Furthermore, increasing pipe outer diameter and soil thermal conductivity both exacerbate pipe temperature rise and stress accumulation. Meanwhile, the longer the duration, the more pronounced the soil heat storage lag. Additionally, when internal pressure increases from 2 MPa to 8 MPa, the pipe’s maximum stress increases by up to 10.8%. The analysis results can provide a theoretical basis for identifying high-risk pipeline sections and guiding route selection and protective measure optimization for pipelines crossing forested areas.
- Open Access
Optimization of a Concentric-Ring Rotating Packed Bed for Enhanced Offshore Natural Gas Dehydration
Facing the harsh offshore environment characterized by severe space constraints and continuous platform motion, this study develops an optimized rotating packed bed (RPB) for compact and robust triethylene glycol dehydration. Through integrated experimental and computational investigation, the concentric-ring rotor was identified as superior among four configurations, consistently achieving dehydration equilibrium above 80% under lean TEG conditions. CFD analysis revealed its fundamental mechanism: synergistic matching between the centrifugal force field and annular flow paths yields the most uniform liquid distribution. This enabled the establishment of a strong predictive correlation (R2 = 0.935) between simulated liquid uniformity and experimental dehydration performance. Guided by flow field diagnostics, targeted structural optimizations increased dehydration equilibrium from 86.1% to 92.25% while reducing system pressure drop by 73%. Parametric studies defined an optimal operating envelope at a gas-to-liquid ratio of 60:1 and system pressure of 2 MPa, achieving peak efficiency of 96.42% with robust performance across 50–150% load variations. This work demonstrates a simulation-guided pathway for intensifying separation processes, providing a validated framework for designing marine-adapted dehydration technology.
Open AccessOptimization of a Concentric-Ring Rotating Packed Bed for Enhanced Offshore Natural Gas Dehydration
Facing the harsh offshore environment characterized by severe space constraints and continuous platform motion, this study develops an optimized rotating packed bed (RPB) for compact and robust triethylene glycol dehydration. Through integrated experimental and computational investigation, the concentric-ring rotor was identified as superior among four configurations, consistently achieving dehydration equilibrium above 80% under lean TEG conditions. CFD analysis revealed its fundamental mechanism: synergistic matching between the centrifugal force field and annular flow paths yields the most uniform liquid distribution. This enabled the establishment of a strong predictive correlation (R2 = 0.935) between simulated liquid uniformity and experimental dehydration performance. Guided by flow field diagnostics, targeted structural optimizations increased dehydration equilibrium from 86.1% to 92.25% while reducing system pressure drop by 73%. Parametric studies defined an optimal operating envelope at a gas-to-liquid ratio of 60:1 and system pressure of 2 MPa, achieving peak efficiency of 96.42% with robust performance across 50–150% load variations. This work demonstrates a simulation-guided pathway for intensifying separation processes, providing a validated framework for designing marine-adapted dehydration technology.
- Open Access
Study on Corrosion in Wet Gas Pipelines Under the Influence of Gas Composition and Geometric Configuration
In response to corrosion challenges encountered during the gathering and transportation of wet natural gas, this study systematically investigates the corrosion behavior of L245NCS steel in environments containing O2, H2S, CO2 and simulated oilfield-produced water. The research employs a combined approach involving high-pressure autoclave experiments and transparent flow loop simulations. Autoclave tests reproduce gas phase, liquid phase, and gas–liquid interface conditions under a controlled O2-H2S-CO2 mixture, while a visual flow loop equipped with elbows and undulating sections is used to examine liquid accumulation behavior and flow characteristics under dynamic, real-world operating conditions. Results indicate that corrosion is most severe at the gas–liquid interface. H2S is identified as the primary corrosive agent, exerting a stronger influence than CO2 or O2. Liquid accumulation is the main factor leading to non-uniform corrosion distribution, and its formation is influenced by water content, pressure, temperature difference, and pipeline shutdown and restart operations. Critical areas such as low-lying sections, downhill bottoms, and the beginning of uphill sections exhibit localized corrosion rates up to 61.4% higher than areas without liquid accumulation. This integrated methodology bridges mechanistic understanding with engineering practice, providing a basis for corrosion risk assessment, optimal monitoring point placement, and integrity management of wet gas pipelines.
Open AccessStudy on Corrosion in Wet Gas Pipelines Under the Influence of Gas Composition and Geometric Configuration
In response to corrosion challenges encountered during the gathering and transportation of wet natural gas, this study systematically investigates the corrosion behavior of L245NCS steel in environments containing O2, H2S, CO2 and simulated oilfield-produced water. The research employs a combined approach involving high-pressure autoclave experiments and transparent flow loop simulations. Autoclave tests reproduce gas phase, liquid phase, and gas–liquid interface conditions under a controlled O2-H2S-CO2 mixture, while a visual flow loop equipped with elbows and undulating sections is used to examine liquid accumulation behavior and flow characteristics under dynamic, real-world operating conditions. Results indicate that corrosion is most severe at the gas–liquid interface. H2S is identified as the primary corrosive agent, exerting a stronger influence than CO2 or O2. Liquid accumulation is the main factor leading to non-uniform corrosion distribution, and its formation is influenced by water content, pressure, temperature difference, and pipeline shutdown and restart operations. Critical areas such as low-lying sections, downhill bottoms, and the beginning of uphill sections exhibit localized corrosion rates up to 61.4% higher than areas without liquid accumulation. This integrated methodology bridges mechanistic understanding with engineering practice, providing a basis for corrosion risk assessment, optimal monitoring point placement, and integrity management of wet gas pipelines.
- Open Access
Study on the Influence of Crude Oil Emulsion Types on Hydrate Formation
Methane hydrate formation in multiphase transportation pipelines represents a critical challenge to flow assurance under low-temperature conditions. Gaining insight into the kinetic effects of crude oil on hydrate formation aids in developing countermeasures for mixed oil–gas transportation. For this purpose, experiments were carried out at 50 vol% to 90 vol% water cut and pressure of 6.0–7.5 MPa under crude oil–methane–water systems. Results demonstrate that crude oil has kinetic inhibition on hydrate formation, which is caused by mass transfer resistance in emulsion gels. The gas consumption increased by 81.38% when the water cut increased from 60 vol% to 70 vol%. Tween-80 converts crude oil W/O emulsions into O/W emulsions. The addition of Tween-80 to a 50 vol% water cut system resulted in only a 10.04% increase in gas consumption compared to the 90% water cut condition. The results indicate that Tween-80 significantly promotes the formation of hydrates. Furthermore, analysis of gas consumption reveals that the O/W system is more conducive to hydrate growth than the W/O system. Observations through the viewing window revealed that lowering the temperature and hydrates synergistically disrupt the stability of the emulsion. This is caused by the phase transition of wax and asphaltene in crude oil. These findings provide insights for developing flow assurance strategies in crude oil multiphase transportation pipeline operations.
Open AccessStudy on the Influence of Crude Oil Emulsion Types on Hydrate Formation
Methane hydrate formation in multiphase transportation pipelines represents a critical challenge to flow assurance under low-temperature conditions. Gaining insight into the kinetic effects of crude oil on hydrate formation aids in developing countermeasures for mixed oil–gas transportation. For this purpose, experiments were carried out at 50 vol% to 90 vol% water cut and pressure of 6.0–7.5 MPa under crude oil–methane–water systems. Results demonstrate that crude oil has kinetic inhibition on hydrate formation, which is caused by mass transfer resistance in emulsion gels. The gas consumption increased by 81.38% when the water cut increased from 60 vol% to 70 vol%. Tween-80 converts crude oil W/O emulsions into O/W emulsions. The addition of Tween-80 to a 50 vol% water cut system resulted in only a 10.04% increase in gas consumption compared to the 90% water cut condition. The results indicate that Tween-80 significantly promotes the formation of hydrates. Furthermore, analysis of gas consumption reveals that the O/W system is more conducive to hydrate growth than the W/O system. Observations through the viewing window revealed that lowering the temperature and hydrates synergistically disrupt the stability of the emulsion. This is caused by the phase transition of wax and asphaltene in crude oil. These findings provide insights for developing flow assurance strategies in crude oil multiphase transportation pipeline operations.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Study on hydrate formation and plugging mechanisms in mineral oil–methane–water bubble flow systems without emulsifiers
Gas hydrate formation poses a significant flow assurance challenge in oil and gas production under extreme environmental conditions. This study specifically investigates the kinetics of methane hydrate formation and the associated plugging mechanisms in multiphase flow systems containing waxy oil. Experiments were conducted in a visual flow loop under various pressure (5.2–8.2 MPa) and temperature (−1 to −3 °C) conditions. The results demonstrate that the presence of waxy oil is a critical factor for pipeline plugging, as it significantly promotes hydrate nucleation—reducing the onset time by up to 53.66%—and fosters particle aggregation, leading to a dramatic increase in slurry apparent viscosity (up to 2067%). In contrast, hydrate slurries in a pure methane–water system flowed smoothly without blockage. Visual observations revealed the macroscopic process from initial hydrate formation and viewing window coverage to aggregate-induced plugging and subsequent hydrate aging and deposition. Higher initial pressure and lower temperature accelerated hydrate formation kinetics and shortened the time to plugging. A key finding is that plugging, which occurred before or after hydrate formation ceased, was primarily due to the aggregation of hydrate particles rather than to a high hydrate volume fraction. These findings highlight the severe synergistic risk posed by hydrates and waxy oils in flow assurance.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Study on hydrate formation and plugging mechanisms in mineral oil–methane–water bubble flow systems without emulsifiers
Gas hydrate formation poses a significant flow assurance challenge in oil and gas production under extreme environmental conditions. This study specifically investigates the kinetics of methane hydrate formation and the associated plugging mechanisms in multiphase flow systems containing waxy oil. Experiments were conducted in a visual flow loop under various pressure (5.2–8.2 MPa) and temperature (−1 to −3 °C) conditions. The results demonstrate that the presence of waxy oil is a critical factor for pipeline plugging, as it significantly promotes hydrate nucleation—reducing the onset time by up to 53.66%—and fosters particle aggregation, leading to a dramatic increase in slurry apparent viscosity (up to 2067%). In contrast, hydrate slurries in a pure methane–water system flowed smoothly without blockage. Visual observations revealed the macroscopic process from initial hydrate formation and viewing window coverage to aggregate-induced plugging and subsequent hydrate aging and deposition. Higher initial pressure and lower temperature accelerated hydrate formation kinetics and shortened the time to plugging. A key finding is that plugging, which occurred before or after hydrate formation ceased, was primarily due to the aggregation of hydrate particles rather than to a high hydrate volume fraction. These findings highlight the severe synergistic risk posed by hydrates and waxy oils in flow assurance.
- 30 June 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (09) , 5725-5742
Study of the Synergistic Effect of Emulsion Gels and Methane Hydrate Slurry on Pipeline Plugging Characteristics
Summary: In accordance with the conditions of the multiphase mixing pipeline that will be constructed in Xinjiang (China), simulation experiments by high-pressure flow loop have been designed to explore the plugging risks. The multiphase flow pattern dominated by bubble flow within the pipeline is analyzed through the superficial velocity and visual window observation. Flow loop experiments are conducted for the gas/water system, the waxy mineral oil/gas/water system, and the crude oil/gas/water system, respectively. The influence of temperature, pressure, and velocity on the flow rate variation of the system and the differential pressure of the experimental section is discussed. The investigation encompasses the analysis of hydrate volume fraction and water conversion rate over time during hydrate formation. The study aims to provide a comprehensive summary of the potential pipeline flow types in various systems and distinguish the difference between the plugging mechanisms of crude oil and model oil systems. It is meaningful for clarifying the impact of crude oil emulsion gels and methane hydrate slurries on pipeline flow assurance under low-temperature and high-pressure conditions.
- 30 June 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (09) , 5725-5742
Study of the Synergistic Effect of Emulsion Gels and Methane Hydrate Slurry on Pipeline Plugging Characteristics
Summary: In accordance with the conditions of the multiphase mixing pipeline that will be constructed in Xinjiang (China), simulation experiments by high-pressure flow loop have been designed to explore the plugging risks. The multiphase flow pattern dominated by bubble flow within the pipeline is analyzed through the superficial velocity and visual window observation. Flow loop experiments are conducted for the gas/water system, the waxy mineral oil/gas/water system, and the crude oil/gas/water system, respectively. The influence of temperature, pressure, and velocity on the flow rate variation of the system and the differential pressure of the experimental section is discussed. The investigation encompasses the analysis of hydrate volume fraction and water conversion rate over time during hydrate formation. The study aims to provide a comprehensive summary of the potential pipeline flow types in various systems and distinguish the difference between the plugging mechanisms of crude oil and model oil systems. It is meaningful for clarifying the impact of crude oil emulsion gels and methane hydrate slurries on pipeline flow assurance under low-temperature and high-pressure conditions.
- 17 February 2025
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 249
Potential kinetic effects of wax on clathrate hydrate formation: A review
- 17 February 2025
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 249
Potential kinetic effects of wax on clathrate hydrate formation: A review