Lawrence T. Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lawrence T. Lin has a total of 140 co-authors. Here are the top co-authors by number of shared publications:
- Ben Keller
Cornell University
8 shared publications - Yuhan Wang
Cornell University
8 shared publications - Johannes Hubmayr
National Institute of Standards and Technology
7 shared publications - Cody J. Duell
Cornell University
6 shared publications - Eve M. Vavagiakis
Duke University
5 shared publications - Alicia Middleton
Cornell University
4 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 1-7
CCAT: Mod-Cam Cryogenic Performance and Its Impact on 280-GHz KID Array Noise
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 1-7
CCAT: Mod-Cam Cryogenic Performance and Its Impact on 280-GHz KID Array Noise
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 2503607
CCAT: Design, Implementation, and Testing of a System to Read Out Over 10 000 280 GHz KIDs Using RFSoC Electronics
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 2503607
CCAT: Design, Implementation, and Testing of a System to Read Out Over 10 000 280 GHz KIDs Using RFSoC Electronics
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 2402506
CCAT: Optical Responsivity, Noise, and Readout Optimization of KIDs for Prime-Cam
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 2402506
CCAT: Optical Responsivity, Noise, and Readout Optimization of KIDs for Prime-Cam
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 2103205
The Simons Observatory: Characterization of All DC/RF Routing Wafers for Detector Modules
The Simons Observatory (SO) is a cosmic microwave background experiment with over 67,000 polarization-sensitive transition-edge sensor (TES) detectors currently installed for use in observations and plans to increase the total detector count to $\sim$98,000 detectors with the Advanced SO upgrade. The TES arrays are packaged into Universal Focal-Plane Modules (UFMs), which also contain the multiplexing readout circuit. Within a readout module, a DC/RF routing wafer provides a cold interface between the detectors and the readout multiplexing chips. Each routing wafer hosts twelve bias lines, which contain the $\sim$400 $\mu \Omega$ shunt resistors that are part of the TES bias circuitry. More than 70 routing wafers have been fabricated and tested both at room temperature and 100 mK before integration into UFMs. The lab measurements for all screened wafers have been compiled to show the distribution of measured average shunt resistance $R_{sh}$ for each bias line, both across bias lines on a single routing wafer and across all routing wafers. The mean average shunt resistance for all wafers was found to be 396 $\mu \Omega$ with a standard deviation of 16 $\mu \Omega$, or $\sim$$4 \%$. For each wafer, we note good uniformity of average $R_{sh}$ between bias lines, with a slight downward trend with increasing distance from the center of the wafer. The fabrication data collected at room temperature shows agreement with the cryogenic measurements of $R_{sh}$ distribution.
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 2103205
The Simons Observatory: Characterization of All DC/RF Routing Wafers for Detector Modules
The Simons Observatory (SO) is a cosmic microwave background experiment with over 67,000 polarization-sensitive transition-edge sensor (TES) detectors currently installed for use in observations and plans to increase the total detector count to $\sim$98,000 detectors with the Advanced SO upgrade. The TES arrays are packaged into Universal Focal-Plane Modules (UFMs), which also contain the multiplexing readout circuit. Within a readout module, a DC/RF routing wafer provides a cold interface between the detectors and the readout multiplexing chips. Each routing wafer hosts twelve bias lines, which contain the $\sim$400 $\mu \Omega$ shunt resistors that are part of the TES bias circuitry. More than 70 routing wafers have been fabricated and tested both at room temperature and 100 mK before integration into UFMs. The lab measurements for all screened wafers have been compiled to show the distribution of measured average shunt resistance $R_{sh}$ for each bias line, both across bias lines on a single routing wafer and across all routing wafers. The mean average shunt resistance for all wafers was found to be 396 $\mu \Omega$ with a standard deviation of 16 $\mu \Omega$, or $\sim$$4 \%$. For each wafer, we note good uniformity of average $R_{sh}$ between bias lines, with a slight downward trend with increasing distance from the center of the wafer. The fabrication data collected at room temperature shows agreement with the cryogenic measurements of $R_{sh}$ distribution.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 1-6
CCAT: Flexible Stripline Circuits for Large-Format Kinetic Inductance Detector (KID) Array Readout
The CCAT Observatory’s primary science instrument, Prime-Cam, is nearing readiness for deployment to the Fred Young Submillimeter Telescope in the Atacama Desert in northern Chile. When fully deployed, Prime-Cam will field approximately 100 000 kinetic inductance detectors (KIDs) across seven instrument modules making both broadband and polarimetric measurements. Meanwhile, in-lab characterization of the first CCAT instrument module, a 280-GHz broadband camera fielding over 10 000 KIDs, is currently underway in the test bed instrument Mod-Cam. Both Mod-Cam and Prime-Cam will employ 46-cm-long low-thermal-conductivity flexible circuits (“stripline”) between 4 and 300 K to connect large-format arrays of multiplexed KIDs in each instrument module to readout electronics. The 280-GHz camera currently installed in Mod-Cam uses six of these striplines to read out its over 10 000 detectors. We have examined the thermal and electrical performance of the stripline installed in Mod-Cam in an effort to better optimize the readout chain for deployment in Prime-Cam. We begin by characterizing the oxygen-free high thermal conductivity (OFHC) copper in the stripline traces, allowing for the estimation of thermal loading through these flexible circuits in their configurations in both Mod-Cam and Prime-Cam. We then directly measure the thermal conductivity of the stripline, finding it is best described by $kA\,=\,22\pm \text{6}\,T^{0.84\pm 0.09}\,\mathrm{\mu W{\cdot } m{\cdot } K^{-1}}$ for temperature ranges of $6\,\mathrm{K} < T < 20\,\mathrm{K}$ and $kA\,=\,0.6\pm \text{0.3}\,T^{-0.4\pm 0.1}\,\mathrm{mW{\cdot } m{\cdot }K^{-1}}$ for ranges from $20\,\mathrm{K}< T < 80\,\mathrm{K}$. Following our thermal characterizations, we report on the transmission and crosstalk properties of the Mod-Cam readout chain, isolating elevated crosstalk to SMP-SMA transition printed circuit boards that interface with the stripline. This finding validates the stripline circuit as a viable high-density cabling option for large-format array readout.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 1-6
CCAT: Flexible Stripline Circuits for Large-Format Kinetic Inductance Detector (KID) Array Readout
The CCAT Observatory’s primary science instrument, Prime-Cam, is nearing readiness for deployment to the Fred Young Submillimeter Telescope in the Atacama Desert in northern Chile. When fully deployed, Prime-Cam will field approximately 100 000 kinetic inductance detectors (KIDs) across seven instrument modules making both broadband and polarimetric measurements. Meanwhile, in-lab characterization of the first CCAT instrument module, a 280-GHz broadband camera fielding over 10 000 KIDs, is currently underway in the test bed instrument Mod-Cam. Both Mod-Cam and Prime-Cam will employ 46-cm-long low-thermal-conductivity flexible circuits (“stripline”) between 4 and 300 K to connect large-format arrays of multiplexed KIDs in each instrument module to readout electronics. The 280-GHz camera currently installed in Mod-Cam uses six of these striplines to read out its over 10 000 detectors. We have examined the thermal and electrical performance of the stripline installed in Mod-Cam in an effort to better optimize the readout chain for deployment in Prime-Cam. We begin by characterizing the oxygen-free high thermal conductivity (OFHC) copper in the stripline traces, allowing for the estimation of thermal loading through these flexible circuits in their configurations in both Mod-Cam and Prime-Cam. We then directly measure the thermal conductivity of the stripline, finding it is best described by $kA\,=\,22\pm \text{6}\,T^{0.84\pm 0.09}\,\mathrm{\mu W{\cdot } m{\cdot } K^{-1}}$ for temperature ranges of $6\,\mathrm{K} < T < 20\,\mathrm{K}$ and $kA\,=\,0.6\pm \text{0.3}\,T^{-0.4\pm 0.1}\,\mathrm{mW{\cdot } m{\cdot }K^{-1}}$ for ranges from $20\,\mathrm{K}< T < 80\,\mathrm{K}$. Following our thermal characterizations, we report on the transmission and crosstalk properties of the Mod-Cam readout chain, isolating elevated crosstalk to SMP-SMA transition printed circuit boards that interface with the stripline. This finding validates the stripline circuit as a viable high-density cabling option for large-format array readout.
- Open Access
- 1 April 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (02) , 026005-16
280-GHz aluminum MKID arrays for the Fred Young Submillimeter Telescope
The Fred Young Submillimeter Telescope (FYST) of the CCAT Collaboration has a 6-m clear aperture, and it is being constructed on Cerro Chajnantor in the Chilean Atacama Desert at an elevation of 5600 m. Prime-Cam1 is one of the two receivers being built for FYST, the other being the CCAT Heterodyne Array Instrument.2 Prime-Cam’s science goals include observing galactic ecology, Sunyaev–Zel’dovich effect, galaxy evolution, and line intensity mapping.1,3 Prime-Cam is designed to be capable of operating in the millimeter to submillimeter (100 GHz to 1.5 THz) range with focal planes made of superconducting microwave kinetic inductance detector (MKID) arrays.
- 1 April 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (02) , 026005-16
Open Access280-GHz aluminum MKID arrays for the Fred Young Submillimeter Telescope
The Fred Young Submillimeter Telescope (FYST) of the CCAT Collaboration has a 6-m clear aperture, and it is being constructed on Cerro Chajnantor in the Chilean Atacama Desert at an elevation of 5600 m. Prime-Cam1 is one of the two receivers being built for FYST, the other being the CCAT Heterodyne Array Instrument.2 Prime-Cam’s science goals include observing galactic ecology, Sunyaev–Zel’dovich effect, galaxy evolution, and line intensity mapping.1,3 Prime-Cam is designed to be capable of operating in the millimeter to submillimeter (100 GHz to 1.5 THz) range with focal planes made of superconducting microwave kinetic inductance detector (MKID) arrays.
- Open Access
- 24 September 2024
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 274 (2) , 33
The Simons Observatory: Design, Integration, and Testing of the Small Aperture Telescopes
The Simons Observatory (SO) is a cosmic microwave background survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of σ(r) = 0.002, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35° field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and 12,000 transition edge sensor detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.
- 24 September 2024
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 274 (2) , 33
Open AccessThe Simons Observatory: Design, Integration, and Testing of the Small Aperture Telescopes
The Simons Observatory (SO) is a cosmic microwave background survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of σ(r) = 0.002, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35° field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and 12,000 transition edge sensor detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.
- 3 February 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 214 (3-4) , 247-255
The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
- 3 February 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 214 (3-4) , 247-255
The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
- Open Access
The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite being deployed in the Atacama Desert in northern Chile. The telescopes within SO use three types of dichroic transition-edge sensor (TES) detector arrays, with the 90 and 150 GHz Mid-Frequency (MF) arrays containing 65% of the approximately 68,000 detectors in the first phase of SO. All of the 26 required MF detector arrays have now been fabricated, packaged into detector modules, and tested in laboratory cryostats. Across all modules, we find an average operable detector yield of 84% and median saturation powers of (2.8, 8.0) pW with interquartile ranges of (1, 2) pW at (90, 150) GHz, respectively, falling within their targeted ranges. We measure TES normal resistances and superconducting transition temperatures on each detector wafer to be uniform within 3%, with overall central values of 7.5 mohm and 165 mK, respectively. Results on time constants, optical efficiency, and noise performance are also presented and are consistent with achieving instrument sensitivity forecasts.
Open AccessThe Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite being deployed in the Atacama Desert in northern Chile. The telescopes within SO use three types of dichroic transition-edge sensor (TES) detector arrays, with the 90 and 150 GHz Mid-Frequency (MF) arrays containing 65% of the approximately 68,000 detectors in the first phase of SO. All of the 26 required MF detector arrays have now been fabricated, packaged into detector modules, and tested in laboratory cryostats. Across all modules, we find an average operable detector yield of 84% and median saturation powers of (2.8, 8.0) pW with interquartile ranges of (1, 2) pW at (90, 150) GHz, respectively, falling within their targeted ranges. We measure TES normal resistances and superconducting transition temperatures on each detector wafer to be uniform within 3%, with overall central values of 7.5 mohm and 165 mK, respectively. Results on time constants, optical efficiency, and noise performance are also presented and are consistent with achieving instrument sensitivity forecasts.