MLMichael J. Link

Michael J. Link

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Michael J. Link has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The Simons Observatory: Characterization of All DC/RF Routing Wafers for Detector Modules

    by Alicia Middleton, Kyuyoung Bae, Cody J. Duell, Shannon M. Duff, Erin Healy, Zachary B. Huber, Johannes Hubmayr, Ben Keller, Lawrence T. Lin, Michael J. Link, et al.

    The Simons Observatory (SO) is a cosmic microwave background experiment with over 67,000 polarization-sensitive transition-edge sensor (TES) detectors currently installed for use in observations and plans to increase the total detector count to $\sim$98,000 detectors with the Advanced SO upgrade. The TES arrays are packaged into Universal Focal-Plane Modules (UFMs), which also contain the multiplexing readout circuit. Within a readout module, a DC/RF routing wafer provides a cold interface between the detectors and the readout multiplexing chips. Each routing wafer hosts twelve bias lines, which contain the $\sim$400 $\mu \Omega$ shunt resistors that are part of the TES bias circuitry. More than 70 routing wafers have been fabricated and tested both at room temperature and 100 mK before integration into UFMs. The lab measurements for all screened wafers have been compiled to show the distribution of measured average shunt resistance $R_{sh}$ for each bias line, both across bias lines on a single routing wafer and across all routing wafers. The mean average shunt resistance for all wafers was found to be 396 $\mu \Omega$ with a standard deviation of 16 $\mu \Omega$, or $\sim$$4 \%$. For each wafer, we note good uniformity of average $R_{sh}$ between bias lines, with a slight downward trend with increasing distance from the center of the wafer. The fabrication data collected at room temperature shows agreement with the cryogenic measurements of $R_{sh}$ distribution.

  • Effects of Temperature and Humidity on AlMn Thin Film Stability

    by Michael J. Link, Dante Jones, Shannon M. Duff

    Aluminum doped with small concentrations of manganese (AlMn) is an important material for the fabrication of superconducting transition-edge sensor (TES) bolometers and microcalorimeters. AlMn is a versatile thin film material and has a tunable superconducting critical temperature Tc, which has been demonstrated to be repeatable and uniform across 150 mm wafers. In the last decade, large-format arrays of highly sensitive AlMn TES bolometers have been deployed to numerous cosmological experiments to study the cosmic microwave background (CMB) such as Advanced ACTPol on the Atacama Cosmology Telescope in Chile, the Simons Observatory in Chile, and the SPIDER balloon-borne instrument which has undergone two flights from the South Pole. Next generation CMB projects and future far-infrared space missions will rely on the demonstrated success of AlMn TESs. Understanding the long-term stability of this thin film material is critical to minimize risk for these future projects. We have characterized the effects of temperature and humidity on patterned and unpatterned AlMn thin films as an essential step for predicting performance limits and establishing failure criteria for future experiments utilizing AlMn TES detectors. Our findings show that AlMn exposed to elevated temperature (60°C and 85°C) and humidity (60% and 85% relative humidity) for prolonged time periods exhibits excellent stability, with small or negligible changes measured in superconducting critical temperature and normal resistance. We show that the presence or absence of a passivating dielectric layer does not alter these results. Additionally, we present the effects of re-annealing passivated and unpassivated AlMn TESs, which may aid in achieving a targeted Tc during the fabrication process. The sample preparation, environmental testing, and data collection and analysis are discussed.

  • The Simons Observatory: Characterization of the 220/280 GHz TES Detector Modules

    by Daniel Dutcher, Peter Dow, Shannon M. Duff, Shawn W. Henderson, Johannes Hubmayr, Bradley R. Johnson, Michael J. Link, Tammy J. Lucas, Michael D. Niemack, Yudai Seino, et al.

    The Simons Observatory (SO) is a new suite of cosmic microwave background telescopes in the Chilean Atacama Desert with an extensive science program spanning cosmology, Galactic and extragalactic astrophysics, and particle physics. SO will survey the millimeter-wave sky over a wide range of angular scales using six spectral bands across three types of dichroic, polarization-sensitive transition-edge sensor (TES) detector modules: Low-Frequency (LF) modules with bandpasses centered near 30 and 40 GHz, Mid-Frequency (MF) modules near 90 and 150 GHz, and Ultra-High-Frequency (UHF) modules near 220 and 280 GHz. Twenty-five UHF detector modules, each containing 1720 optically-coupled TESs connected to microwave SQUID multiplexing readout, have now been produced. This work summarizes the pre-deployment characterization of these detector modules in laboratory cryostats. Across all UHF modules, we find an average operable TES yield of 83%, equating to over 36,000 devices tested. The distributions of (220, 280) GHz saturation powers have medians of (24, 26) pW, near the centers of their target ranges. For both bands, the median optical efficiency is 0.6, the median effective time constant is 0.4 ms, and the median dark noise-equivalent power (NEP) is $\sim$40 aW$/\sqrt{\mathbf {Hz}}$. The expected photon NEPs at (220, 280) GHz are (64, 99) aW$/\sqrt{\mathbf {Hz}}$, indicating these detectors will achieve background-limited performance on the sky. Thirty-nine UHF and MF detector modules are currently operating in fielded SO instruments, which are transitioning from the commissioning stage to full science observations.


  • Demonstration of a 1820 channel multiplexer for transition-edge sensor bolometers

    by J. C. Groh, Z. Ahmed, J. Austermann, J. Beall, D. Daniel, S. M. Duff, S. W. Henderson, J. Hubmayr, R. Lew, M. Link, et al.

    The scalability of most transition-edge sensor arrays is limited by the multiplexing technology, which combines their signals over a reduced number of wires and amplifiers. In this Letter, we present and demonstrate a multiplexer design optimized for transition-edge sensor bolometers with 1820 sensors per readout unit, a factor of two more than the previous state-of-the-art. The design is optimized for cosmic microwave background imaging applications, and it builds on previous microwave superconducting quantum interference device multiplexers by doubling the available readout bandwidth to the full 4–8 GHz octave. Evaluating the key performance metrics of yield, sensitivity, and crosstalk through laboratory testing, we find an end-to-end operable detector yield of 78%, a typical nearest-neighbor crosstalk amplitude of ∼0.4%, and a median white noise level of 83 pA/Hz due to the multiplexer, corresponding to an estimated contribution of 4% to the total system noise for a ground-based cosmic microwave background telescope. Additionally, we identify a possible path toward reducing resonator loss for future designs with reduced noise. We expect these developments to alleviate the system complexity, cryogenic requirements, and cost of future large arrays of low temperature detectors.


  • Open Access

    Simons Observatory: Characterization of the Large Aperture Telescope Receiver

    by Tanay Bhandarkar, Saianeesh K. Haridas, Jeff Iuliano, Anna Kofman, Alex Manduca, Karen Perez Sarmiento, John Orlowski-Scherer, Thomas P. Satterthwaite, Yuhan Wang, Zeeshan Ahmed, et al.

    The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) survey experiment that currently consists of three 0.42 m small-aperture telescopes and one 6 m large-aperture telescope (LAT), located at an elevation of 5200 m in the Atacama Desert in Chile. At the LAT’s focal plane, SO will install >62,000 transition-edge sensor detectors across 13 optics tubes (OTs) within the Large Aperture Telescope Receiver (LATR), the largest cryogenic camera ever built to observe the CMB. Here we report on the validation of the LATR in the laboratory and the subsequent dark testing and validation within the LAT. We show that the LATR meets cryogenic, optical, and detector specifications required for high-sensitivity measurements of the CMB. At the time of writing, the LATR is installed in the LAT with six OTs (corresponding to >31,000 detectors), and the LAT mirrors and remaining seven OTs are undergoing development.


  • Open Access

    The Simons Observatory: Production-Level Fabrication of the Mid- and Ultra-High-Frequency Wafers

    by Shannon M. Duff, Jason Austermann, James A. Beall, David P. Daniel, Johannes Hubmayr, Greg C. Jaehnig, Bradley R. Johnson, Dante Jones, Michael J. Link, Tammy J. Lucas, et al.

    The Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with $$88\%$$ 88 % of detector wafers meeting nominal criteria for integration into a detector module: a channel yield $$>95\%$$ > 95 % and $$T_{\textrm{c}}$$ T c in the targeted range.


  • Open Access

    Qualification of Microwave SQUID Multiplexer Chips for Simons Observatory

    by Dante Jones, Robinjeet Singh, Jason Austermann, J. A. Beall, David Daniel, Shannon M. Duff, Daniel Dutcher, John Groh, Johannes Hubmayr, Bradley R. Johnson, et al.

    The Simons Observatory is a cosmic microwave background experiment stationed atop Cerro Toco, at an elevation of 5200 ms in Chile’s Atacama Desert. The receivers of the Observatory will contain more than 60,000 transition edge sensor bolometers. In order to read out this large detector count in a scalable manner, we utilize a microwave superconducting quantum interference device (SQUID) multiplexing scheme where each detector is inductively coupled to an rf SQUID, which in turn is inductively coupled to a GHz resonator. More than 2000 SQUIDs and resonators are fabricated on a single 76.2-mm-diameter silicon wafer. To qualify wafers before integration, we cryogenically screen $$\sim$$ ∼ 10% of the devices on each wafer by use of a standard set of measurements. From these data, we report parameter value trends in 47 wafers that were fabricated in the past two years. We show good control in key parameters such as frequency placement, internal quality factor, and response to applied flux. We demonstrate a wafer acceptance yield of 86%.


  • Open Access

    The Simons Observatory: Production-level Fabrication of the Mid- and Ultra-High-Frequency Wafers

    by Shannon M. Duff, Jason Austermann, James A. Beall, David P. Daniel, Johannes Hubmayr, Greg C. Jaehnig, Bradley R. Johnson, Dante Jones, Michael J. Link, Tammy J. Lucas, et al.

    The Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer (OMT)-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with 88% of detector wafers meeting nominal criteria for integration into a detector module: a channel yield > 95% and Tc in the targeted range.

  • The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules

    by Daniel Dutcher, Shannon M. Duff, John C. Groh, Erin Healy, Johannes Hubmayr, Bradley R. Johnson, Dante Jones, Ben Keller, Lawrence T. Lin, Michael J. Link, et al.


  • Open Access

    The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules

    by Daniel Dutcher, Shannon M. Duff, John C. Groh, Erin Healy, Johannes Hubmayr, Bradley R. Johnson, Dante Jones, Ben Keller, Lawrence T. Lin, Michael J. Link, et al.

    The Simons Observatory (SO) is a cosmic microwave background instrumentation suite being deployed in the Atacama Desert in northern Chile. The telescopes within SO use three types of dichroic transition-edge sensor (TES) detector arrays, with the 90 and 150 GHz Mid-Frequency (MF) arrays containing 65% of the approximately 68,000 detectors in the first phase of SO. All of the 26 required MF detector arrays have now been fabricated, packaged into detector modules, and tested in laboratory cryostats. Across all modules, we find an average operable detector yield of 84% and median saturation powers of (2.8, 8.0) pW with interquartile ranges of (1, 2) pW at (90, 150) GHz, respectively, falling within their targeted ranges. We measure TES normal resistances and superconducting transition temperatures on each detector wafer to be uniform within 3%, with overall central values of 7.5 mohm and 165 mK, respectively. Results on time constants, optical efficiency, and noise performance are also presented and are consistent with achieving instrument sensitivity forecasts.