Xiao Ma
Xiao Ma has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Hui Zhang
Hunan Center of Natural Resources Affairs, Changsha 410004, China
3 shared publications - Liji Sun
Hunan Center of Natural Resources Affairs, Changsha 410004, China
3 shared publications - Bin Li
Key Laboratory of Metallogenic Prediction of Nonferrous Metals and Geological Environment Monitoring (Ministry of Education), School of Geosciences and Info-Physics, Central South University, Changsha 410083, China
2 shared publications - Chaolin Zhang
School of Geosciences and Info-Physics, Central South University, Changsha 410083, China
2 shared publications - Chen Yu
School of Intelligent Construction, Guangxi Minzu University, Nanning 530006, China
2 shared publications - Dapeng Chen
School of Intelligent Construction, Guangxi Minzu University, Nanning 530006, China
2 shared publications
Latest Publications
- Open Access
- 22 September 2026
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 15 (10) , 436
Empirical Post-Generation Correctness Assessment for Natural-Language Access to Urban PostGIS Databases
Natural-language interfaces make urban spatial databases accessible, but generated structured query language (SQL) can execute successfully while returning a semantically incorrect answer. We evaluate a post-generation correctness-ranking layer on 18,900 candidates from Nanjing, Wuhan, and Shenzhen. The original city split is a controlled, highly template-aligned benchmark rather than a structure-disjoint deployment test. Under strict source-side separation of fitting, isotonic calibration, threshold selection, and target evaluation, Spatial-safe improves executed non-empty area under the receiver operating characteristic curve (AUROC) in all nine transfer directions by 0.062 on average. Grouped-threshold area under the risk–coverage curve (AURC) is favorable in 8/9 directions, and calibration is mixed. Source-selected thresholds raise mean conditional target coverage within the executed non-empty operating subset from 0.457 to 0.669, while mean empirical risk rises from 0.110 to 0.136. Unseen-template and SQL-skeleton-disjoint effects are smaller and mixed. To determine whether the existing benchmark could support the adequately powered structure-disjoint comparison, we applied a predeclared power/data-sufficiency feasibility gate. With only 77 independent SQL-skeleton groups, 42/60 required cells fail the gate; therefore, the present benchmark cannot support an adequately powered structure-disjoint performance comparison without additional skeleton-diverse questions. We do not substitute an underpowered estimate for that missing evidence. The evidence therefore supports empirical correctness-ranking improvement in this controlled benchmark, not universal structure-disjoint generalization, formal SQL verification, benchmark-wide human validation of all correctness labels, or target-domain risk guarantees.
- 22 September 2026
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 15 (10) , 436
Open AccessEmpirical Post-Generation Correctness Assessment for Natural-Language Access to Urban PostGIS Databases
Natural-language interfaces make urban spatial databases accessible, but generated structured query language (SQL) can execute successfully while returning a semantically incorrect answer. We evaluate a post-generation correctness-ranking layer on 18,900 candidates from Nanjing, Wuhan, and Shenzhen. The original city split is a controlled, highly template-aligned benchmark rather than a structure-disjoint deployment test. Under strict source-side separation of fitting, isotonic calibration, threshold selection, and target evaluation, Spatial-safe improves executed non-empty area under the receiver operating characteristic curve (AUROC) in all nine transfer directions by 0.062 on average. Grouped-threshold area under the risk–coverage curve (AURC) is favorable in 8/9 directions, and calibration is mixed. Source-selected thresholds raise mean conditional target coverage within the executed non-empty operating subset from 0.457 to 0.669, while mean empirical risk rises from 0.110 to 0.136. Unseen-template and SQL-skeleton-disjoint effects are smaller and mixed. To determine whether the existing benchmark could support the adequately powered structure-disjoint comparison, we applied a predeclared power/data-sufficiency feasibility gate. With only 77 independent SQL-skeleton groups, 42/60 required cells fail the gate; therefore, the present benchmark cannot support an adequately powered structure-disjoint performance comparison without additional skeleton-diverse questions. We do not substitute an underpowered estimate for that missing evidence. The evidence therefore supports empirical correctness-ranking improvement in this controlled benchmark, not universal structure-disjoint generalization, formal SQL verification, benchmark-wide human validation of all correctness labels, or target-domain risk guarantees.
- Open Access
- 28 August 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (17) , 8590
Mineralogical and Geochemical Constraints on the Ore-Forming Processes of the Datangpo Manganese Deposits in Western and Central Hunan, South China
Datangpo-type manganese (Mn) deposits in South China constitute a key archive of Cryogenian postglacial oceanic evolution and large-scale Mn mineralization. However, systematic comparisons between western and central Hunan remain limited, particularly regarding redox conditions, Mn precipitation pathways, and Mn sources. This study investigates Mn ores hosted within the Datangpo black shale succession in western and central Hunan through integrated petrographic, mineralogical, and whole-rock geochemical analyses. The ores are dominated by rhodochrosite and dolomite, with subordinate quartz, pyrite, and illite. Pyrite framboid characteristics together with redox-sensitive trace element systematics record increasingly reducing conditions from high- to low-grade ores, highlighting the control of redox conditions on Mn enrichment. Medium- to high-grade ores show limited terrigenous input and generally shift toward hydrothermal Fe–Mn end members, consistent with a hydrothermal contribution to Mn supply. Mn enrichment generally involved oxidative fixation during deposition, followed by reductive carbonatization during early diagenesis. Locally intensified hydrothermal input may also have promoted limited direct precipitation of Mn carbonate under reducing, Mn-rich, and alkaline conditions. This model may provide a useful basis for interpreting other Datangpo-type Mn deposits in South China.
- 28 August 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (17) , 8590
Open AccessMineralogical and Geochemical Constraints on the Ore-Forming Processes of the Datangpo Manganese Deposits in Western and Central Hunan, South China
Datangpo-type manganese (Mn) deposits in South China constitute a key archive of Cryogenian postglacial oceanic evolution and large-scale Mn mineralization. However, systematic comparisons between western and central Hunan remain limited, particularly regarding redox conditions, Mn precipitation pathways, and Mn sources. This study investigates Mn ores hosted within the Datangpo black shale succession in western and central Hunan through integrated petrographic, mineralogical, and whole-rock geochemical analyses. The ores are dominated by rhodochrosite and dolomite, with subordinate quartz, pyrite, and illite. Pyrite framboid characteristics together with redox-sensitive trace element systematics record increasingly reducing conditions from high- to low-grade ores, highlighting the control of redox conditions on Mn enrichment. Medium- to high-grade ores show limited terrigenous input and generally shift toward hydrothermal Fe–Mn end members, consistent with a hydrothermal contribution to Mn supply. Mn enrichment generally involved oxidative fixation during deposition, followed by reductive carbonatization during early diagenesis. Locally intensified hydrothermal input may also have promoted limited direct precipitation of Mn carbonate under reducing, Mn-rich, and alkaline conditions. This model may provide a useful basis for interpreting other Datangpo-type Mn deposits in South China.
- Open Access
Geochemical Characteristics of the Shuibutou Sedimentary Manganese Deposit in Southern Hunan Province, South China
Permian sedimentary manganese carbonate deposits in the Qiling Basin exhibit substantial resource potential, yet their depositional environments and precipitation pathways remain insufficiently constrained. This study integrates petrographic, mineralogical, whole-rock geochemical, and carbonate C–O isotope data from the Shuibutou Mn deposit in southern Hunan. We compare this deposit with the coeval Dongxiangqiao deposit and other Permian marine sedimentary Mn deposits to constrain its depositional setting, Mn-carbonate precipitation mechanisms, and potential Mn sources. The Shuibutou ores contain 10.88–17.18 wt.% MnO and are characterized by spherulitic–oolitic textures, abundant bioclasts, and framboidal pyrite. Mo–U enrichment indicates anoxic bottom waters, whereas the near-marine δ13Ccarb values of ore carbonates (−0.24‰ to 1.28‰) are consistent with precipitation within a marine carbonate system and suggest direct precipitation of Mn(II) carbonates from dissolved Mn2+ under anoxic conditions. In this setting, dissolved Mn2+ accumulated below the chemocline. Partial dissolution of platform-derived calcite grains near the chemocline increased local dissolved inorganic carbon and alkalinity, driving Mn-carbonate supersaturation and the authigenic precipitation of manganoan calcite, ultimately forming manganese carbonate ores. The low Al/(Al + Fe + Mn) ratios, high Fe/Ti ratios, and Co–Ni–Zn and REY geochemical characteristics are consistent with a possible contribution from Mn-rich deep fluids to the dissolved Mn2+ inventory of the basin waters. Similarities in mineralogy, geochemistry, and depositional setting between Shuibutou and Dongxiangqiao point to a possible regional role for the direct precipitation of Mn(II) carbonates under anoxic conditions in the Middle Permian Qiling Basin. Relatively deep intraplatform basins may therefore represent favorable targets for manganese carbonate exploration and provide a reference for exploration targeting of Permian sedimentary Mn deposits within the Qiling Basin.
Open AccessGeochemical Characteristics of the Shuibutou Sedimentary Manganese Deposit in Southern Hunan Province, South China
Permian sedimentary manganese carbonate deposits in the Qiling Basin exhibit substantial resource potential, yet their depositional environments and precipitation pathways remain insufficiently constrained. This study integrates petrographic, mineralogical, whole-rock geochemical, and carbonate C–O isotope data from the Shuibutou Mn deposit in southern Hunan. We compare this deposit with the coeval Dongxiangqiao deposit and other Permian marine sedimentary Mn deposits to constrain its depositional setting, Mn-carbonate precipitation mechanisms, and potential Mn sources. The Shuibutou ores contain 10.88–17.18 wt.% MnO and are characterized by spherulitic–oolitic textures, abundant bioclasts, and framboidal pyrite. Mo–U enrichment indicates anoxic bottom waters, whereas the near-marine δ13Ccarb values of ore carbonates (−0.24‰ to 1.28‰) are consistent with precipitation within a marine carbonate system and suggest direct precipitation of Mn(II) carbonates from dissolved Mn2+ under anoxic conditions. In this setting, dissolved Mn2+ accumulated below the chemocline. Partial dissolution of platform-derived calcite grains near the chemocline increased local dissolved inorganic carbon and alkalinity, driving Mn-carbonate supersaturation and the authigenic precipitation of manganoan calcite, ultimately forming manganese carbonate ores. The low Al/(Al + Fe + Mn) ratios, high Fe/Ti ratios, and Co–Ni–Zn and REY geochemical characteristics are consistent with a possible contribution from Mn-rich deep fluids to the dissolved Mn2+ inventory of the basin waters. Similarities in mineralogy, geochemistry, and depositional setting between Shuibutou and Dongxiangqiao point to a possible regional role for the direct precipitation of Mn(II) carbonates under anoxic conditions in the Middle Permian Qiling Basin. Relatively deep intraplatform basins may therefore represent favorable targets for manganese carbonate exploration and provide a reference for exploration targeting of Permian sedimentary Mn deposits within the Qiling Basin.
- Open Access
- 18 August 2026
- Published by MDPI AG in Preprints.org
Geochemical Characteristics of the Shuibutou Sedimentary Manganese Deposit in Southern Hunan Province, South China
Permian sedimentary manganese carbonate deposits in the Qiling Basin exhibit substantial resource potential, yet their depositional environments and precipitation pathways remain insufficiently constrained. This study integrates petrographic, mineralogical, whole-rock geochemical, and carbonate C–O isotope data from the Shuibutou Mn deposit in southern Hunan. We compare this deposit with the coeval Dongxiangqiao deposit and other Permian marine sedimentary Mn deposits to constrain its depositional setting, Mn-carbonate precipitation mechanisms, and potential Mn sources. The Shuibutou ores contain 10.88–17.18 wt.% MnO and are characterized by spherulitic–oolitic textures, abundant bioclasts, and framboidal pyrite. Mo–U enrichment indicates anoxic bottom waters, whereas the near-marine δ¹³Ccarb values of ore carbonates (−0.24‰ to 1.28‰) are consistent with pre-cipitation within a marine carbonate system and suggest direct precipitation of Mn(II) carbonates from dissolved Mn²⁺ under anoxic conditions. In this setting, dissolved Mn²⁺ accumulated below the chemocline. Partial dissolution of platform-derived calcite grains near the chemocline increased local dissolved inorganic carbon and alkalinity, driving Mn-carbonate supersaturation and the authigenic precipitation of manganoan calcite, ultimately forming manganese carbonate ores. The low Al/(Al + Fe + Mn) ratios, high Fe/Ti ratios, and Co–Ni–Zn and REY geochemical characteristics are consistent with a possible contribution from Mn-rich deep fluids to the dissolved Mn²⁺ inventory of the basin waters. Similarities in mineralogy, geochemistry, and depositional setting between Shuibutou and Dongxiangqiao point to a possible regional role for the direct precipitation of Mn(II) carbonates under anoxic conditions in the Middle Permian Qiling Basin. Relatively deep intraplatform basins may therefore represent favorable targets for manganese carbonate exploration and provide a reference for exploration targeting of Permian sedimentary Mn deposits within the Qiling Basin.
- 18 August 2026
- Published by MDPI AG in Preprints.org
Open AccessGeochemical Characteristics of the Shuibutou Sedimentary Manganese Deposit in Southern Hunan Province, South China
Permian sedimentary manganese carbonate deposits in the Qiling Basin exhibit substantial resource potential, yet their depositional environments and precipitation pathways remain insufficiently constrained. This study integrates petrographic, mineralogical, whole-rock geochemical, and carbonate C–O isotope data from the Shuibutou Mn deposit in southern Hunan. We compare this deposit with the coeval Dongxiangqiao deposit and other Permian marine sedimentary Mn deposits to constrain its depositional setting, Mn-carbonate precipitation mechanisms, and potential Mn sources. The Shuibutou ores contain 10.88–17.18 wt.% MnO and are characterized by spherulitic–oolitic textures, abundant bioclasts, and framboidal pyrite. Mo–U enrichment indicates anoxic bottom waters, whereas the near-marine δ¹³Ccarb values of ore carbonates (−0.24‰ to 1.28‰) are consistent with pre-cipitation within a marine carbonate system and suggest direct precipitation of Mn(II) carbonates from dissolved Mn²⁺ under anoxic conditions. In this setting, dissolved Mn²⁺ accumulated below the chemocline. Partial dissolution of platform-derived calcite grains near the chemocline increased local dissolved inorganic carbon and alkalinity, driving Mn-carbonate supersaturation and the authigenic precipitation of manganoan calcite, ultimately forming manganese carbonate ores. The low Al/(Al + Fe + Mn) ratios, high Fe/Ti ratios, and Co–Ni–Zn and REY geochemical characteristics are consistent with a possible contribution from Mn-rich deep fluids to the dissolved Mn²⁺ inventory of the basin waters. Similarities in mineralogy, geochemistry, and depositional setting between Shuibutou and Dongxiangqiao point to a possible regional role for the direct precipitation of Mn(II) carbonates under anoxic conditions in the Middle Permian Qiling Basin. Relatively deep intraplatform basins may therefore represent favorable targets for manganese carbonate exploration and provide a reference for exploration targeting of Permian sedimentary Mn deposits within the Qiling Basin.
- Open Access
- 8 July 2026
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 15 (7) , 310
GeoIR-Compiler: A Geospatial Intermediate Representation and Compilation Framework for Chinese Urban Spatial Question Answering
Natural-language access to spatial databases requires relation interpretation, entity grounding, metric normalization, and database-specific execution semantics. Direct generation of Structured Query Language (SQL) by large language models (LLMs) can therefore return executable but spatially wrong SQL, especially for Chinese urban questions with aliases, abbreviated place names, and geometry-dependent predicates. This paper presents GeoIR-Compiler, a spatially specialized framework that maps a Chinese question to a typed geospatial intermediate representation (GeoIR), grounds mentions and attributes to database objects, and deterministically compiles the grounded representation into SQL for PostGIS, a spatial database extension for PostgreSQL. The contribution is the specialization of intermediate representations for Chinese urban spatial question answering through explicit spatial relations, metric constraints, grounding records, and PostGIS execution templates. We construct two controlled executable benchmarks, NJ-GeoIR-700 and WH-GeoIR-700, covering retrieval, topology, distance, nearest-neighbor, aggregation, compositional, and alias/noisy-mention queries. Across seven locally served backbones, GeoIR-Full reaches mean execution accuracies of 0.7271 on Nanjing and 0.7363 on Wuhan, outperforming Direct-SQL, Data-Augmented In-Context Learning (DAIL)-SQL-style, and Linking-SQL under the fixed evaluation protocol. Ablations are consistent with grounding contributing strongly to the observed gains, while verification mainly trades coverage for answer reliability.
- 8 July 2026
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 15 (7) , 310
Open AccessGeoIR-Compiler: A Geospatial Intermediate Representation and Compilation Framework for Chinese Urban Spatial Question Answering
Natural-language access to spatial databases requires relation interpretation, entity grounding, metric normalization, and database-specific execution semantics. Direct generation of Structured Query Language (SQL) by large language models (LLMs) can therefore return executable but spatially wrong SQL, especially for Chinese urban questions with aliases, abbreviated place names, and geometry-dependent predicates. This paper presents GeoIR-Compiler, a spatially specialized framework that maps a Chinese question to a typed geospatial intermediate representation (GeoIR), grounds mentions and attributes to database objects, and deterministically compiles the grounded representation into SQL for PostGIS, a spatial database extension for PostgreSQL. The contribution is the specialization of intermediate representations for Chinese urban spatial question answering through explicit spatial relations, metric constraints, grounding records, and PostGIS execution templates. We construct two controlled executable benchmarks, NJ-GeoIR-700 and WH-GeoIR-700, covering retrieval, topology, distance, nearest-neighbor, aggregation, compositional, and alias/noisy-mention queries. Across seven locally served backbones, GeoIR-Full reaches mean execution accuracies of 0.7271 on Nanjing and 0.7363 on Wuhan, outperforming Direct-SQL, Data-Augmented In-Context Learning (DAIL)-SQL-style, and Linking-SQL under the fixed evaluation protocol. Ablations are consistent with grounding contributing strongly to the observed gains, while verification mainly trades coverage for answer reliability.
- Open Access
Characteristics of Lamination in Deep Marine Shale and Its Influence on Mechanical Properties: A Case Study on the Wufeng-Longmaxi Formation in Sichuan Basin
The extensive development of lamination structures in shale significantly influences its mechanical properties. However, a systematic analysis of how laminae affect the macroscopic mechanical behavior of rocks remains absent. In this study, field emission scanning electron microscopy (FE-SEM), thin section observation, X-ray diffraction (XRD), triaxial compression and Brazilian tests were carried out on the deep marine shale of the Wufeng-Longmaxi Formation in Sichuan Basin. The results reveal four distinct laminasets: grading thin silt–thick mud (GSM1), grading medium thick silt–mud (GSM2), grading thick silt–thin mud (GSM3) and alternating thick silt–thin mud (ASM). GSM3 and ASM laminasets exhibit the weakest mechanical properties and the simplest fracture patterns, while GSM2 demonstrates moderate mechanical properties and more complex fracture patterns. GSM1 shows the highest mechanical strength and the most intricate fracture patterns. Mechanical properties are positively correlated with siliceous mineral content and negatively correlated with clay mineral content and scale of laminae development (average density and thickness), revealing that lamination plays a key role in fracture behavior, with more intensively developed laminasets leading to the concentrated distribution of brittle silty minerals, facilitating microcrack propagation. Moreover, microstructure has an important effect on both mechanical properties and fracture pattern. In grain-supported structures, closely packed silty brittle mineral grains reduce the energy required for crack extension. In matrix-supported structures, widespread silty brittle mineral grains increase energy requirements for crack extension, leading to more irregular and complex fracture networks. This study enhances the understanding of the effects of lamination on the rock mechanical behavior of shales, optimizing hydraulic fracturing design in shale reservoirs.
Open AccessCharacteristics of Lamination in Deep Marine Shale and Its Influence on Mechanical Properties: A Case Study on the Wufeng-Longmaxi Formation in Sichuan Basin
The extensive development of lamination structures in shale significantly influences its mechanical properties. However, a systematic analysis of how laminae affect the macroscopic mechanical behavior of rocks remains absent. In this study, field emission scanning electron microscopy (FE-SEM), thin section observation, X-ray diffraction (XRD), triaxial compression and Brazilian tests were carried out on the deep marine shale of the Wufeng-Longmaxi Formation in Sichuan Basin. The results reveal four distinct laminasets: grading thin silt–thick mud (GSM1), grading medium thick silt–mud (GSM2), grading thick silt–thin mud (GSM3) and alternating thick silt–thin mud (ASM). GSM3 and ASM laminasets exhibit the weakest mechanical properties and the simplest fracture patterns, while GSM2 demonstrates moderate mechanical properties and more complex fracture patterns. GSM1 shows the highest mechanical strength and the most intricate fracture patterns. Mechanical properties are positively correlated with siliceous mineral content and negatively correlated with clay mineral content and scale of laminae development (average density and thickness), revealing that lamination plays a key role in fracture behavior, with more intensively developed laminasets leading to the concentrated distribution of brittle silty minerals, facilitating microcrack propagation. Moreover, microstructure has an important effect on both mechanical properties and fracture pattern. In grain-supported structures, closely packed silty brittle mineral grains reduce the energy required for crack extension. In matrix-supported structures, widespread silty brittle mineral grains increase energy requirements for crack extension, leading to more irregular and complex fracture networks. This study enhances the understanding of the effects of lamination on the rock mechanical behavior of shales, optimizing hydraulic fracturing design in shale reservoirs.
- Open Access
Developing Characteristics of Shale Lamination and Their Impact on Reservoir Properties in the Deep Wufeng–Longmaxi Formation Shale of the Southern Sichuan Basin
The deep shale of the Wufeng–Longmaxi Formation in the southern Sichuan Basin has high gas potential. The development characteristics of lamination could significantly impact reservoir property. Samples were investigated using microscopic observation, element analysis, organic petrology analysis, mineralogy analysis, and pore structure analysis to determine the types of laminae and laminasets, clarify the formation conditions of argillaceous lamina and silty lamina as well as their relationships with the sedimentary environment, and explore the influence of laminae on shale reservoir property. Results indicate that the Wufeng Formation shale exhibits weak development of laminae due to bioturbation, while the Longmaxi Formation shale develops continuous, parallel, and plate-like laminae. Compared with light silty lamina-rich shale, dark argillaceous lamina-rich shale usually develops in an anoxic reduction environment, with higher total organic carbon content, porosity, pore volume, specific surface area, and more developed organic matter pores, which can provide greater space for shale gas adsorption and storage. Shales in the middle section of the Longmaxi Formation are characterized by the development of silty-argillaceous interbedded type laminaset, which have good reservoir performance, making them the primary target for deep shale gas exploration and development.
Open AccessDeveloping Characteristics of Shale Lamination and Their Impact on Reservoir Properties in the Deep Wufeng–Longmaxi Formation Shale of the Southern Sichuan Basin
The deep shale of the Wufeng–Longmaxi Formation in the southern Sichuan Basin has high gas potential. The development characteristics of lamination could significantly impact reservoir property. Samples were investigated using microscopic observation, element analysis, organic petrology analysis, mineralogy analysis, and pore structure analysis to determine the types of laminae and laminasets, clarify the formation conditions of argillaceous lamina and silty lamina as well as their relationships with the sedimentary environment, and explore the influence of laminae on shale reservoir property. Results indicate that the Wufeng Formation shale exhibits weak development of laminae due to bioturbation, while the Longmaxi Formation shale develops continuous, parallel, and plate-like laminae. Compared with light silty lamina-rich shale, dark argillaceous lamina-rich shale usually develops in an anoxic reduction environment, with higher total organic carbon content, porosity, pore volume, specific surface area, and more developed organic matter pores, which can provide greater space for shale gas adsorption and storage. Shales in the middle section of the Longmaxi Formation are characterized by the development of silty-argillaceous interbedded type laminaset, which have good reservoir performance, making them the primary target for deep shale gas exploration and development.