Xiaoli Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaoli Liu has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Peng Yu
Key Laboratory of Geological Safety of Coastal Urban Underground Space, Ministry of Natural Resources, Qingdao Geo-Engineering Surveying Institute, Qingdao 266101, China
2 shared publications Yushuang Liu
2 shared publicationsChenghao Zhu
1 shared publication- Gangzheng Xi
Shandong Provincial Key Laboratory of Marine Environment and Geological Engineering, Ocean University of China, Qingdao 266100, China
1 shared publication - Hong-Yi Zhao
College of Civil Engineering, Qingdao University of Technology, Qingdao 266033, China
1 shared publication - Hong-Yi Zhao
State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University, Nanjing 210098, China
1 shared publication
Latest Publications
- 13 January 2025
- Published by Elsevier in Ocean Engineering
- Vol. 320
Shear-sliding failure in a cohesionless seabed induced by waves and its correlation with liquefaction
- 13 January 2025
- Published by Elsevier in Ocean Engineering
- Vol. 320
Shear-sliding failure in a cohesionless seabed induced by waves and its correlation with liquefaction
- Open Access
An Investigation of Silty Sediment Erodibility Considering the Effects of Upward Seepage and Slope Gradient
The phenomenon of extensive erosion of silty submarine slopes in the Yellow River delta has been well documented in numerous studies. Due to poor drainage and high compressibility, silty sediments are particularly prone to pore pressure buildup and accumulated seepage under wave and current action, which can influence sediment erodibility (e.g., the critical bed shear stress and the erosion rate under various bed shear stresses). To date, there remains a lack of parametric formulation to quantitatively characterize the erodibility of silty sediments with the coupled effects of the hydraulic gradient of upward seepage and the slope gradient. In this study, a series of laboratory experiments were conducted to explore the erodibility of silt sediments from the Yellow River delta under varying hydraulic gradients of upward seepage and slope gradients. The results reveal that both upward seepage and increased slope gradients can enhance the erodibility of silty sediments. Specifically, as the seepage gradient increases from 0.1 to 0.8, the critical Shields parameter required for initiating silty particle motion decreases linearly, with a reduction rate of 0.01 per 0.1 increase in the seepage gradient, independently of changes in slope gradient. Additionally, the erosion coefficient of silty sediments grows exponentially with rising seepage gradients, with its average growth rate accelerating with increasing slope inclination. For flat sediment beds, the erosion coefficient influenced by upward seepage can be up to five times that in the absence of seepage. An empirical formula for calculating the critical Shields parameter and an erosion model incorporating upward seepage gradient and slope effects were developed through multiple regression analysis, providing an experimental basis for numerical simulations of scour in silty submarine slopes under combined waves and currents.
Open AccessAn Investigation of Silty Sediment Erodibility Considering the Effects of Upward Seepage and Slope Gradient
The phenomenon of extensive erosion of silty submarine slopes in the Yellow River delta has been well documented in numerous studies. Due to poor drainage and high compressibility, silty sediments are particularly prone to pore pressure buildup and accumulated seepage under wave and current action, which can influence sediment erodibility (e.g., the critical bed shear stress and the erosion rate under various bed shear stresses). To date, there remains a lack of parametric formulation to quantitatively characterize the erodibility of silty sediments with the coupled effects of the hydraulic gradient of upward seepage and the slope gradient. In this study, a series of laboratory experiments were conducted to explore the erodibility of silt sediments from the Yellow River delta under varying hydraulic gradients of upward seepage and slope gradients. The results reveal that both upward seepage and increased slope gradients can enhance the erodibility of silty sediments. Specifically, as the seepage gradient increases from 0.1 to 0.8, the critical Shields parameter required for initiating silty particle motion decreases linearly, with a reduction rate of 0.01 per 0.1 increase in the seepage gradient, independently of changes in slope gradient. Additionally, the erosion coefficient of silty sediments grows exponentially with rising seepage gradients, with its average growth rate accelerating with increasing slope inclination. For flat sediment beds, the erosion coefficient influenced by upward seepage can be up to five times that in the absence of seepage. An empirical formula for calculating the critical Shields parameter and an erosion model incorporating upward seepage gradient and slope effects were developed through multiple regression analysis, providing an experimental basis for numerical simulations of scour in silty submarine slopes under combined waves and currents.
- Open Access
- 21 August 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (16) , 7177
A Numerical Investigation of the Effects of Wave-Induced Soil Deformation on Solute Release from Submarine Sediments
The sustainable development of marine environments requires a deep understanding of their chemical and biological conditions. These are significantly impacted by the exchange of substances such as contaminants, heavy metals, and nutrients between marine sediments and the water column. Although the existing literature has addressed the physics of enhanced solute migration in sediment due to sea waves, the role of coupled flow and soil deformation has often been neglected. This study investigates the effects of wave-induced soil deformation on solute release from the marine sediment using a coupled numerical model that incorporates the effect of soil deformation into the advection–diffusion equation. The results reveal that solute release is notably accelerated in deformable sediments with a smaller shear modulus, with the longitudinal dispersion coefficient increasing up to five times as the shear modulus decreases from 108 Pa to 106 Pa. This enhancement is more pronounced in shallow sediments as the sediment permeability decreases, where the longitudinal dispersion coefficient in deformable sediments can be 15 times higher than that in non-deformable sediments at a hydraulic conductivity of 1 × 10−5 m/s. Furthermore, the rate of solute release increases with decreasing sediment saturation due to the compressibility of pore water, although this rate of increase gradually diminishes.
- 21 August 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (16) , 7177
Open AccessA Numerical Investigation of the Effects of Wave-Induced Soil Deformation on Solute Release from Submarine Sediments
The sustainable development of marine environments requires a deep understanding of their chemical and biological conditions. These are significantly impacted by the exchange of substances such as contaminants, heavy metals, and nutrients between marine sediments and the water column. Although the existing literature has addressed the physics of enhanced solute migration in sediment due to sea waves, the role of coupled flow and soil deformation has often been neglected. This study investigates the effects of wave-induced soil deformation on solute release from the marine sediment using a coupled numerical model that incorporates the effect of soil deformation into the advection–diffusion equation. The results reveal that solute release is notably accelerated in deformable sediments with a smaller shear modulus, with the longitudinal dispersion coefficient increasing up to five times as the shear modulus decreases from 108 Pa to 106 Pa. This enhancement is more pronounced in shallow sediments as the sediment permeability decreases, where the longitudinal dispersion coefficient in deformable sediments can be 15 times higher than that in non-deformable sediments at a hydraulic conductivity of 1 × 10−5 m/s. Furthermore, the rate of solute release increases with decreasing sediment saturation due to the compressibility of pore water, although this rate of increase gradually diminishes.
- 24 January 2024
- Published by Elsevier in Ocean Engineering
- Vol. 294
Experimental study of structure dimensions effects on local scour of submerged compound suction anchor foundation
- 24 January 2024
- Published by Elsevier in Ocean Engineering
- Vol. 294
Experimental study of structure dimensions effects on local scour of submerged compound suction anchor foundation
- 23 March 2023
- Published by Elsevier in Chemosphere
- Vol. 327, 138505
Detoxification mechanisms of biochar on plants in chromium contaminated soil: Chromium chemical forms and subcellular distribution
- 23 March 2023
- Published by Elsevier in Chemosphere
- Vol. 327, 138505
Detoxification mechanisms of biochar on plants in chromium contaminated soil: Chromium chemical forms and subcellular distribution
- Open Access
- 3 February 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (2) , 336
RANS-Based Modelling of Turbulent Flow in Submarine Pipe Bends: Effect of Computational Mesh and Turbulence Modelling
Pipe bend is a critical integral component, widely used in slurry pipeline systems involving various engineering applications, including natural gas hydrate production. The aim of this study is to assess the capability of RANS-based CFD models to capture the main features of the turbulent single-phase flow in pipe bends, in view of the future investigation of the hydrate slurry flow in the same geometry. This is different from the available literature in which only a few accounted for the effects of a combination of computational mesh, turbulence model, and near-wall treatment approach. In this study, three types of mesh configuration were adopted to carry out the computations, namely unstructured mesh and two structured meshes with a uniform and nonuniform inflation layer, respectively. To explore the influence of the turbulence model, standard k-ε, low-Reynolds k-ε, and nonlinear eddy viscosity turbulence model were selected to close RANS equations. Pressure coefficient, mean axial velocity, turbulence intensity, secondary flow velocity, and magnitude of secondary flow were regarded as the critical variables to make a comprehensive sensitivity analysis. Predicted results suggest that turbulent kinetic energy is the most sensitive variable to the computational mesh while others tend to stabilize. The largest difference of turbulence kinetic energy was around 26% between unstructured mesh and structured mesh with a nonuniform inflation layer. Additionally, a fully resolved boundary layer can reduce the sensitivity of mesh on turbulent kinetic energy, especially for a nonlinear turbulence model. However, the large gradient and peak value of turbulence intensity near the inner wall of the bend was not captured by the case with a fully resolved boundary layer, compared with that of the wall function used. Furthermore, it has been confirmed that the same rule was detected also for different curvature ratios, Reynolds numbers, and dimensionless wall distance y+.
- 3 February 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (2) , 336
Open AccessRANS-Based Modelling of Turbulent Flow in Submarine Pipe Bends: Effect of Computational Mesh and Turbulence Modelling
Pipe bend is a critical integral component, widely used in slurry pipeline systems involving various engineering applications, including natural gas hydrate production. The aim of this study is to assess the capability of RANS-based CFD models to capture the main features of the turbulent single-phase flow in pipe bends, in view of the future investigation of the hydrate slurry flow in the same geometry. This is different from the available literature in which only a few accounted for the effects of a combination of computational mesh, turbulence model, and near-wall treatment approach. In this study, three types of mesh configuration were adopted to carry out the computations, namely unstructured mesh and two structured meshes with a uniform and nonuniform inflation layer, respectively. To explore the influence of the turbulence model, standard k-ε, low-Reynolds k-ε, and nonlinear eddy viscosity turbulence model were selected to close RANS equations. Pressure coefficient, mean axial velocity, turbulence intensity, secondary flow velocity, and magnitude of secondary flow were regarded as the critical variables to make a comprehensive sensitivity analysis. Predicted results suggest that turbulent kinetic energy is the most sensitive variable to the computational mesh while others tend to stabilize. The largest difference of turbulence kinetic energy was around 26% between unstructured mesh and structured mesh with a nonuniform inflation layer. Additionally, a fully resolved boundary layer can reduce the sensitivity of mesh on turbulent kinetic energy, especially for a nonlinear turbulence model. However, the large gradient and peak value of turbulence intensity near the inner wall of the bend was not captured by the case with a fully resolved boundary layer, compared with that of the wall function used. Furthermore, it has been confirmed that the same rule was detected also for different curvature ratios, Reynolds numbers, and dimensionless wall distance y+.
- 16 April 2022
- Published by Springer Nature in Natural Hazards
- Vol. 113 (2) , 1367-1384
Experimental investigation on anti-sliding performance of grouted micro-pipe pile groups
- 16 April 2022
- Published by Springer Nature in Natural Hazards
- Vol. 113 (2) , 1367-1384
Experimental investigation on anti-sliding performance of grouted micro-pipe pile groups