YCYundong Cao

Yundong Cao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yundong Cao has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of contact rotation on the vacuum arc root movement

    by Zhengbo Li, Si Fu, Yundong Cao

    This paper aims to investigate the dynamic characteristics of vacuum metal vapor arcs under rotating and traditional direct contact separation modes. Non-symmetrical pure copper electrodes with an anode radius of 7.5 mm and a cathode radius of 22.5 mm are employed in the experiments. The permanent magnet actuator provides an average opening speed of 1.0 m/s for cathode direct separation and 1–3 deg/ms for rotation. Results show that electrode rotation significantly influences the distribution and motion speed of the arc root on the cathode surface.


  • Research on the Liquid Metal Bridge Formation Process at Contact Separation Moment of DC Air Circuit Breaker

    by Shidong Peng, Jing Li, Shuxin Liu, Yundong Cao

    The liquid metal bridge generated at the microspot of the contact has a crucial role in the formation of the arc, which provides the initial energy distribution for the ignition of the arc when the dc air circuit breaker is interrupted. A transient model of microspot thermal process which includes solid, liquid, and gas phase transition of liquid metal bridge during dc air circuit breaker contact separation was established in this article. The key parameters such as temperature, electric potential, and melting voltage of the material during liquid metal bridge formation process were analyzed, and the effects of different microspot surface topographies and contact materials on the liquid metal bridge formation process were also considered. The results show that the microscopic contact surface topography affects the contact microspot thermal process. The liquid metal bridge is formed fastest in pin-pin microspot surface topography and slowest in sphere-sphere microspot surface topography. The formation of the liquid metal bridge of the pure silver contact is the fastest and that of the pure tungsten contact is the slowest at the pin-pin microspot surface topography. A reasonable choice of contact materials can slow down the formation of liquid metal bridge and reduce contact ablation, which can improve the reliability of the circuit breaker and extend contact service life. This article can provide a reference for further research on the mechanism of arc formation process and exploring of ablation resistance contact materials. It can also provide a complement to the traditional arc magneto-hydro-dynamic (MHD) modeling.


  • Open Access

    Fluid modeling of CF3I/CO2 arc formation process

    by Shidong Peng, Jing Li, Yue Yin, Wen Jian, Si Fu, Shuxin Liu, Yundong Cao, Jiaxin Lu

    The environmentally friendly insulating gas CF3I is a promising replacement for SF6 due to its excellent insulation and arc extinguishing performance. In the arc chamber of high-voltage circuit breakers filled with CF3I/CO2, the near-electrode sheath dominates the current transfer process between contact and arc column during arc formation, which has a significant effect on the transition from glow to arc discharge. The 30%CF3I/70%CO2 was taken as the research object in this research, and a more perfect fluid model was established considering the influence of diffusion current. The arc formation process between the contacts at the preliminary stage of circuit breaker interruption was conducted. The results show that the arc formation process can be divided into three stages: glow discharge, abnormal glow discharge, and arc discharge. As the arc formation process proceeds, the thickness of the near-cathode sheath decreases gradually. When the arc reaches stability with the current density 8×106–1.6×107A·m−2, the thickness of the near-cathode sheath is 7 μm, the steep voltage fall near the cathode sheath is generated within 7 μm away from the cathode surface, and this voltage fall almost does not change with the current density. CF3I− is the dominant negative ion between the contacts, which indicates that CF3I has excellent electron adsorption performance and is beneficial to arc deionization. The computational results of this work were compared with the existing experimental ones, which shows that the model used in this work is accurate enough. Finally, suggestions for model optimization and future work are given.


  • Open Access

    Prediction of Residual Electrical Life in Railway Relays Based on Convolutional Neural Network Bidirectional Long Short-Term Memory

    by Shuxin Liu, Yankai Li, Shuyu Gao, Chaojian Xing, Jing Li, Yundong Cao

    In this paper, we address several issues with existing methods for predicting the residual electrical life of railway relays. These issues include the difficulty of single feature prediction in characterizing the degradation process, the neglect of temporal and backward–forward correlations in the degradation process, and low prediction accuracy. To overcome these challenges, we propose a novel approach that combines convolutional neural networks (CNNs) and bidirectional long short-term memory (BiLSTM) to facilitate the life prediction of railway relays and provide an accurate data basis for the maintenance of railway relays. Firstly, we collected voltage and current signals from railway relay electrical life tests and extracted feature parameters that captured the relay’s operating state. Next, we applied Spearman correlation coefficient analysis combined with random forest importance analysis to perform double-feature selection. This process eliminates redundant feature parameters and identifies the optimal feature subset. Finally, we constructed a convolutional neural network bidirectional long short-term memory (CNN BiLSTM) prediction model to accurately predict the remaining electrical life of the railway relay. Through our analysis of the prediction results, we observed that the CNN BiLSTM model achieves an effective prediction accuracy of 96.3%. This accuracy is significantly higher, more stable, and more practical compared to other prediction models such as recurrent neural networks (RNNs), long short-term memory (LSTM), and BiLSTM models. Overall, our proposed CNN BiLSTM model offers higher accuracy, better stability, and greater practicality in predicting the remaining electrical life of railway relays.


  • Analysis on vibration and acoustic joint mechanical fault diagnosis of high voltage vacuum circuit based on wavelet packet energy relative entropy

    by Hou Chunguang, Li Yulong, Cao Yundong, Li Jing, Cao Yuchen

    In view of the requirement of high reliability and small disturbance in the condition of high-voltage (HV) vacuum circuit breaker (VCB), this paper puts forward a method of fault diagnosis based on online monitoring of vibration and acoustic signal. The research object is the 12kV indoor high-voltage vacuum circuit breakers and the system of fault diagnosis of the research object is built. This method uses fast kernel independent component analysis to make blind source separation processing for acoustic signals collected when HV VCB switch on. The wavelet packet energy should be calculated in each frequency of the vibration and acoustic signal. Support vector machine with the wavelet packet energy relative entropy as input vector to classify the common states, such as the normal condition, insufficient lubrication of the crank arm and mechanism fall off in moving. Experimental study has shown that, according to research on the characteristics of the vibration and acoustic signal generated by the circuit breaker, the proposed method can differentiate between normal working state and failure state and meet the high reliability of HV VCB status monitoring requirements.


  • Simulation on the formation of sheath in argon discharge

    by Yundong Cao, Jing Li, Jiyan Zou, Xiaoming Liu, Chunguang Hou

    The formation of arc in high voltage equipment is an unbalanced gas disruption and the principles of it are important in apparatus switching. For the complexity of gas disruption principles, the modeling and computer simulations to the beginning of gas disruption are vital in this domain. Particle-in-cell method is adopted in our work to disperse the Boltzmann equation and build a mathematical model. The gas disruption between the contacts of electrical apparatus at the beginning of switching is studied by this method and the microscopic parameters about gas disruption and the formation of sheath are also acquired here. A lot of charged particles are traced in our work and the formation of plasma sheath, the distribution function of electron, ionization rate, density of electron and the electric field are acquired. The long-range collisions between electron, ion and atom are considered here and the cross section is relating to particle energy. It can be seen from the results that the voltage between the electrodes have an effect on the formation of the sheath and the sheath plays an important role in breaker switching.

  • Ion-molecule collision modeling of plasma discharge

    by Yundong Cao, Jing Li, Jiyan Zou, Xiaoming Liu, Chunguang Hou

    In order to certify the function of ion to the gas discharge, a model of direct current discharge of argon, which includes the elastic and charge exchange collisions between ions and neutral gases, is examined using the particle-in-cell (PIC)/Monte Carlo collision (MCC) simulation. The structure of our electrode is one dimension and for the velocity of the particles, three dimensions calculation is considered in our study. The temperature of the gas is 293 K and the voltage between the electrodes is 500 V. We traced the motions of the electrons and the ions until they reached the electrode and the surface emitting from cathode is also considered here. The actions of the particles are given by the Newton laws of the motion and the potential field model related to the energy is adopted here to describe the processes of collisions which will modify the motions of the ions. In this method, the functions of gamma and beta process in gas discharge are certified.


  • Optimum Design of Vacuum Interrupter Using Chaotic Neural Network

    by Yundong Cao, Shixun Liu, Xiaoming Liu, Erzhi Wang, Yuhuan Zhao

    The chaotic neural network (CNN), the combination of the chaotic and the artificial neural network (ANN), is presented and applied to optimize the vacuum interrupter. Moreover, the unique dynamic characteristic of the CNN has been successfully utilized for solving the multivariable optimization. And the feasibility and the validity for the global optimization are verified by the demonstrated examples