Charlotte Christina Roossien
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Charlotte Christina Roossien has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
M.F. Reneman
University of Groningen, University Medical Center Groningen, Department of Rehabilitation Medicine, Hanzeplein 1, 9713 GZ, Groningen, the Netherlands
5 shared publicationsG.J. Verkerke
University of Groningen, University Medical Center Groningen, Department of Rehabilitation Medicine, Hanzeplein 1, 9713 GZ, Groningen, the Netherlands
4 shared publications- Christian Greve
University of Groningen, University Medical Center Groningen, Department of Human Movement Sciences, Groningen, the Netherlands; University of Groningen, University Medical Center Groningen, Department of Rehabilitation Medicine, Groningen, the Netherlands
3 shared publications - Ce Zhang
University of Groningen, University Medical Center Groningen, Department of Rehabilitation Medicine, Groningen, the Netherlands
2 shared publications - Gijsbertus Jacob Verkerke
Department of Rehabilitation Medicine, University of Groningen, University Medical Center Groningen, Hanzeplein 1, 9713 GZ Groningen, The Netherlands
2 shared publications - Gijsbertus Jacob Verkerke
Department of Rehabilitation Medicine, University Medical Center Groningen, University of Groningen, the Netherlands
2 shared publications
Latest Publications
- Open Access
- 2 July 2025
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 53  (10) , 2392-2407
Advancements in Biomedical Sensors for Early Detection of Failure in Hip and Knee Implants: Scoping Review on Potential Sensors for Implant Integration
Purpose: Despite significant advancements in hip and knee joint implant technology, 6.4% of implants fail within the first ten years due to aseptic loosening, instability, and/or infection. Implants equipped with sensors show promise in early failure detection, enabling early and reduced intervention. This scoping review aims to provide an overview of biomedical sensors and their potential for integration into hip- and knee implants. Methods: A comprehensive search of databases PubMed and Embase was performed. Inclusion criteria were sensors to detect failure causes infection, inflammation, loosening or wear; developed for biomedical applications; ex vivo, in vivo and/or in vitro studies. The sensors were analysed based on criteria per sensor characteristics (e.g. accuracy, durability, response time) relevant for implant integration. Results: 49 articles were included presenting 52 sensors: 24 pressure and force, 6 strain, 15 acidity, 4 temperature, and 3 bacterial detection (3 dual sensing elements). Among these, three sensors were specifically designed for hip- and knee implants. The remaining 46 were developed for other biomedical applications. Our analysis identified two strain and seven acidity sensors that met the criteria for detecting hip- and knee implant failure. Two bacteria sensors showed potential for short-term use post-implantation, aligning with the critical period for periprosthetic infection, but the reporting frequency was too low to draw proper conclusions. No wear (particle) sensor was found. Conclusion: We found a significant gap in sensors that can detect wear particles. Future work on continuous implant monitoring should focus on reducing risk and the enhancement of sensor durability and longevity.
- 2 July 2025
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 53  (10) , 2392-2407
Open AccessAdvancements in Biomedical Sensors for Early Detection of Failure in Hip and Knee Implants: Scoping Review on Potential Sensors for Implant Integration
Purpose: Despite significant advancements in hip and knee joint implant technology, 6.4% of implants fail within the first ten years due to aseptic loosening, instability, and/or infection. Implants equipped with sensors show promise in early failure detection, enabling early and reduced intervention. This scoping review aims to provide an overview of biomedical sensors and their potential for integration into hip- and knee implants. Methods: A comprehensive search of databases PubMed and Embase was performed. Inclusion criteria were sensors to detect failure causes infection, inflammation, loosening or wear; developed for biomedical applications; ex vivo, in vivo and/or in vitro studies. The sensors were analysed based on criteria per sensor characteristics (e.g. accuracy, durability, response time) relevant for implant integration. Results: 49 articles were included presenting 52 sensors: 24 pressure and force, 6 strain, 15 acidity, 4 temperature, and 3 bacterial detection (3 dual sensing elements). Among these, three sensors were specifically designed for hip- and knee implants. The remaining 46 were developed for other biomedical applications. Our analysis identified two strain and seven acidity sensors that met the criteria for detecting hip- and knee implant failure. Two bacteria sensors showed potential for short-term use post-implantation, aligning with the critical period for periprosthetic infection, but the reporting frequency was too low to draw proper conclusions. No wear (particle) sensor was found. Conclusion: We found a significant gap in sensors that can detect wear particles. Future work on continuous implant monitoring should focus on reducing risk and the enhancement of sensor durability and longevity.
- 30 January 2024
- Published by Elsevier in Applied Ergonomics
- Vol. 118, 104221
Corrigendum to “Monitoring core temperature of firefighters to validate a wearable non-invasive core thermometer in different types of protective clothing: Concurrent in-vivo validation” [Appl. Ergon. 83 (2020) 103001]
- 30 January 2024
- Published by Elsevier in Applied Ergonomics
- Vol. 118, 104221
Corrigendum to “Monitoring core temperature of firefighters to validate a wearable non-invasive core thermometer in different types of protective clothing: Concurrent in-vivo validation” [Appl. Ergon. 83 (2020) 103001]
- Open Access
Biomechanical Load of Neck and Lumbar Joints in Open-Surgery Training
The prevalence of musculoskeletal symptoms (MSS) like neck and back pain is high among open-surgery surgeons. Prolonged working in the same posture and unfavourable postures are biomechanical risk factors for developing MSS. Ergonomic devices such as exoskeletons are possible solutions that can reduce muscle and joint load. To design effective exoskeletons for surgeons, one needs to quantify which neck and trunk postures are seen and how much support during actual surgery is required. Hence, this study aimed to establish the biomechanical profile of neck and trunk postures and neck and lumbar joint loads during open surgery (training). Eight surgical trainees volunteered to participate in this research. Neck and trunk segment orientations were recorded using an inertial measurement unit (IMU) system during open surgery (training). Neck and lumbar joint kinematics, joint moments and compression forces were computed using OpenSim modelling software and a musculoskeletal model. Histograms were used to illustrate the joint angle and load distribution of the neck and lumbar joints over time. During open surgery, the neck flexion angle was 71.6% of the total duration in the range of 10~40 degrees, and lumbar flexion was 68.9% of the duration in the range of 10~30 degrees. The normalized neck and lumbar flexion moments were 53.8% and 35.5% of the time in the range of 0.04~0.06 Nm/kg and 0.4~0.6 Nm/kg, respectively. Furthermore, the neck and lumbar compression forces were 32.9% and 38.2% of the time in the range of 2.0~2.5 N/kg and 15~20 N/kg, respectively. In contrast to exoskeletons used for heavy lifting tasks, exoskeletons designed for surgeons exhibit lower support torque requirements while additional degrees of freedom (DOF) are needed to accommodate combinations of neck and trunk postures.
Open AccessBiomechanical Load of Neck and Lumbar Joints in Open-Surgery Training
The prevalence of musculoskeletal symptoms (MSS) like neck and back pain is high among open-surgery surgeons. Prolonged working in the same posture and unfavourable postures are biomechanical risk factors for developing MSS. Ergonomic devices such as exoskeletons are possible solutions that can reduce muscle and joint load. To design effective exoskeletons for surgeons, one needs to quantify which neck and trunk postures are seen and how much support during actual surgery is required. Hence, this study aimed to establish the biomechanical profile of neck and trunk postures and neck and lumbar joint loads during open surgery (training). Eight surgical trainees volunteered to participate in this research. Neck and trunk segment orientations were recorded using an inertial measurement unit (IMU) system during open surgery (training). Neck and lumbar joint kinematics, joint moments and compression forces were computed using OpenSim modelling software and a musculoskeletal model. Histograms were used to illustrate the joint angle and load distribution of the neck and lumbar joints over time. During open surgery, the neck flexion angle was 71.6% of the total duration in the range of 10~40 degrees, and lumbar flexion was 68.9% of the duration in the range of 10~30 degrees. The normalized neck and lumbar flexion moments were 53.8% and 35.5% of the time in the range of 0.04~0.06 Nm/kg and 0.4~0.6 Nm/kg, respectively. Furthermore, the neck and lumbar compression forces were 32.9% and 38.2% of the time in the range of 2.0~2.5 N/kg and 15~20 N/kg, respectively. In contrast to exoskeletons used for heavy lifting tasks, exoskeletons designed for surgeons exhibit lower support torque requirements while additional degrees of freedom (DOF) are needed to accommodate combinations of neck and trunk postures.
- Open Access
- 26 June 2023
- Published by Gdanski Uniwersytet Medyczny in European Journal of Translational and Clinical Medicine
- Vol. 6  (2) , 10-25
Optimisation of osteosynthesis positioning in mandibular body fracture management using finite element analysis
Optimisation of osteosynthesis positioning in mandibular body fracture management using finite element analysis. Background: This proof of principle study aims to investigate the applicability of finite element analysis (FEA) in Oral and Maxillofacial (OMF) su...
- 26 June 2023
- Published by Gdanski Uniwersytet Medyczny in European Journal of Translational and Clinical Medicine
- Vol. 6  (2) , 10-25
Open AccessOptimisation of osteosynthesis positioning in mandibular body fracture management using finite element analysis
Optimisation of osteosynthesis positioning in mandibular body fracture management using finite element analysis. Background: This proof of principle study aims to investigate the applicability of finite element analysis (FEA) in Oral and Maxillofacial (OMF) su...
- Top Cited PapersOpen Access
- 2 May 2023
- Published by Elsevier in Applied Ergonomics
- Vol. 111, 104042
Side-effects and adverse events of a shoulder- and back-support exoskeleton in workers: A systematic review
- 2 May 2023
- Published by Elsevier in Applied Ergonomics
- Vol. 111, 104042
Top Cited PapersOpen AccessSide-effects and adverse events of a shoulder- and back-support exoskeleton in workers: A systematic review
- Open Access
Pilot Validation Study of Inertial Measurement Units and Markerless Methods for 3D Neck and Trunk Kinematics during a Simulated Surgery Task
Surgeons are at high risk for developing musculoskeletal symptoms (MSS), like neck and back pain. Quantitative analysis of 3D neck and trunk movements during surgery can help to develop preventive devices such as exoskeletons. Inertial Measurement Units (IMU) and markerless motion capture methods are allowed in the operating room (OR) and are a good alternative for bulky optoelectronic systems. We aim to validate IMU and markerless methods against an optoelectronic system during a simulated surgery task. Intraclass correlation coefficient (ICC (2,1)), root mean square error (RMSE), range of motion (ROM) difference and Bland–Altman plots were used for evaluating both methods. The IMU-based motion analysis showed good-to-excellent (ICC 0.80–0.97) agreement with the gold standard within 2.3 to 3.9 degrees RMSE accuracy during simulated surgery tasks. The markerless method shows 5.5 to 8.7 degrees RMSE accuracy (ICC 0.31–0.70). Therefore, the IMU method is recommended over the markerless motion capture.
Open AccessPilot Validation Study of Inertial Measurement Units and Markerless Methods for 3D Neck and Trunk Kinematics during a Simulated Surgery Task
Surgeons are at high risk for developing musculoskeletal symptoms (MSS), like neck and back pain. Quantitative analysis of 3D neck and trunk movements during surgery can help to develop preventive devices such as exoskeletons. Inertial Measurement Units (IMU) and markerless motion capture methods are allowed in the operating room (OR) and are a good alternative for bulky optoelectronic systems. We aim to validate IMU and markerless methods against an optoelectronic system during a simulated surgery task. Intraclass correlation coefficient (ICC (2,1)), root mean square error (RMSE), range of motion (ROM) difference and Bland–Altman plots were used for evaluating both methods. The IMU-based motion analysis showed good-to-excellent (ICC 0.80–0.97) agreement with the gold standard within 2.3 to 3.9 degrees RMSE accuracy during simulated surgery tasks. The markerless method shows 5.5 to 8.7 degrees RMSE accuracy (ICC 0.31–0.70). Therefore, the IMU method is recommended over the markerless motion capture.
- Open Access
- 20 August 2021
- Published by Frontiers Media SA in Frontiers in Digital Health
- Vol. 3
Ethics in Design and Implementation of Technologies for Workplace Health Promotion: A Call for Discussion
Aim:This study aims to initiate discussion on the ethical issues surrounding the development and implementation of technologies for workplace health promotion. We believe this is a neglected topic and such a complex field of study that we cannot come up with solutions easily or quickly. Therefore, this study is the starting point of a discussion about the ethics of and the need for policies around technologies for workplace health promotion.Method:Based on a literature review, the present study outlines current knowledge of ethical issues in research, development, and implementation of technologies in the workplace. Specifically, the focus is on two ethical issues that play an important role in the worker–employer relation: privacy and autonomy.Application:Two cases indicative for a multidisciplinary project aimed at developing and evaluating sensor and intervention technologies that contribute to keeping ageing workers healthy and effectively employable are explored. A context-specific approach of ethics is used to investigate ethical issues during the development and implementation of sensor and intervention technologies. It is a holistic approach toward the diverse field of participants and stakeholders, and the diversity in perceptions of relevant values, depending on their respective professional languages.Discussion:The results show how protecting the privacy and autonomy of workers cannot be seen as stand-alone issues, but, rather, there is interplay between these values, the work context, and the responsibilities of workers and employers. Consequently, technologies in this research project are designed to improve worker conscientious autonomy, while concurrently creating balance between privacy and health, and assigning responsibilities to appropriate stakeholders.Conclusion:Focusing on a contextual conceptualisation of the ethical principles in the design and implementation of digital health technologies helps to avoid compartmentalization, out-of-context generalisation, and neglect of identifying responsibilities. Although it is a long reiterative process in which all stakeholders need to be included in order to assess all ethical issues sufficiently, this process is crucial to achieving the intended goal of a technology. Having laid out the landscape and problems of ethics around technologies for workplace health promotion, we believe policies and standards, and a very overdue discussion about these, are needed.
- 20 August 2021
- Published by Frontiers Media SA in Frontiers in Digital Health
- Vol. 3
Open AccessEthics in Design and Implementation of Technologies for Workplace Health Promotion: A Call for Discussion
Aim:This study aims to initiate discussion on the ethical issues surrounding the development and implementation of technologies for workplace health promotion. We believe this is a neglected topic and such a complex field of study that we cannot come up with solutions easily or quickly. Therefore, this study is the starting point of a discussion about the ethics of and the need for policies around technologies for workplace health promotion.Method:Based on a literature review, the present study outlines current knowledge of ethical issues in research, development, and implementation of technologies in the workplace. Specifically, the focus is on two ethical issues that play an important role in the worker–employer relation: privacy and autonomy.Application:Two cases indicative for a multidisciplinary project aimed at developing and evaluating sensor and intervention technologies that contribute to keeping ageing workers healthy and effectively employable are explored. A context-specific approach of ethics is used to investigate ethical issues during the development and implementation of sensor and intervention technologies. It is a holistic approach toward the diverse field of participants and stakeholders, and the diversity in perceptions of relevant values, depending on their respective professional languages.Discussion:The results show how protecting the privacy and autonomy of workers cannot be seen as stand-alone issues, but, rather, there is interplay between these values, the work context, and the responsibilities of workers and employers. Consequently, technologies in this research project are designed to improve worker conscientious autonomy, while concurrently creating balance between privacy and health, and assigning responsibilities to appropriate stakeholders.Conclusion:Focusing on a contextual conceptualisation of the ethical principles in the design and implementation of digital health technologies helps to avoid compartmentalization, out-of-context generalisation, and neglect of identifying responsibilities. Although it is a long reiterative process in which all stakeholders need to be included in order to assess all ethical issues sufficiently, this process is crucial to achieving the intended goal of a technology. Having laid out the landscape and problems of ethics around technologies for workplace health promotion, we believe policies and standards, and a very overdue discussion about these, are needed.
- Open Access
- 4 May 2021
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 18  (9) , 4896
Evaluation of a Wearable Non-Invasive Thermometer for Monitoring Ear Canal Temperature during Physically Demanding (Outdoor) Work
Aimed at preventing heat strain, health problems, and absenteeism among workers with physically demanding occupations, a continuous, accurate, non-invasive measuring system may help such workers monitor their body (core) temperature. The aim of this study is to evaluate the accuracy and explore the usability of the wearable non-invasive Cosinuss° °Temp thermometer. Ear canal temperature was monitored in 49 workers in real-life working conditions. After individual correction, the results of the laboratory and field study revealed high correlations compared to ear canal infrared thermometry for hospital use. After performance of the real-life working tasks, this correlation was found to be moderate. It was also observed that the ambient environmental outdoor conditions and personal protective clothing influenced the accuracy and resulted in unrealistic ear canal temperature outliers. It was found that the Cosinuss° °Temp thermometer did not result in significant interference during work. Therefore, it was concluded that, without a correction factor, the Cosinuss° °Temp thermometer is inaccurate. Nevertheless, with a correction factor, the reliability of this wearable ear canal thermometer was confirmed at rest, but not in outdoor working conditions or while wearing a helmet or hearing protection equipment.
- 4 May 2021
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 18  (9) , 4896
Open AccessEvaluation of a Wearable Non-Invasive Thermometer for Monitoring Ear Canal Temperature during Physically Demanding (Outdoor) Work
Aimed at preventing heat strain, health problems, and absenteeism among workers with physically demanding occupations, a continuous, accurate, non-invasive measuring system may help such workers monitor their body (core) temperature. The aim of this study is to evaluate the accuracy and explore the usability of the wearable non-invasive Cosinuss° °Temp thermometer. Ear canal temperature was monitored in 49 workers in real-life working conditions. After individual correction, the results of the laboratory and field study revealed high correlations compared to ear canal infrared thermometry for hospital use. After performance of the real-life working tasks, this correlation was found to be moderate. It was also observed that the ambient environmental outdoor conditions and personal protective clothing influenced the accuracy and resulted in unrealistic ear canal temperature outliers. It was found that the Cosinuss° °Temp thermometer did not result in significant interference during work. Therefore, it was concluded that, without a correction factor, the Cosinuss° °Temp thermometer is inaccurate. Nevertheless, with a correction factor, the reliability of this wearable ear canal thermometer was confirmed at rest, but not in outdoor working conditions or while wearing a helmet or hearing protection equipment.
- Open Access
Automatically Determining Lumbar Load during Physically Demanding Work: A Validation Study
A sensor-based system using inertial magnetic measurement units and surface electromyography is suitable for objectively and automatically monitoring the lumbar load during physically demanding work. The validity and usability of this system in the uncontrolled real-life working environment of physically active workers are still unknown. The objective of this study was to test the discriminant validity of an artificial neural network-based method for load assessment during actual work. Nine physically active workers performed work-related tasks while wearing the sensor system. The main measure representing lumbar load was the net moment around the L5/S1 intervertebral body, estimated using a method that was based on artificial neural network and perceived workload. The mean differences (MDs) were tested using a paired t-test. During heavy tasks, the net moment (MD = 64.3 ± 13.5%, p = 0.028) and the perceived workload (MD = 5.1 ± 2.1, p < 0.001) observed were significantly higher than during the light tasks. The lumbar load had significantly higher variances during the dynamic tasks (MD = 33.5 ± 36.8%, p = 0.026) and the perceived workload was significantly higher (MD = 2.2 ± 1.5, p = 0.002) than during static tasks. It was concluded that the validity of this sensor-based system was supported because the differences in the lumbar load were consistent with the perceived intensity levels and character of the work tasks.
Open AccessAutomatically Determining Lumbar Load during Physically Demanding Work: A Validation Study
A sensor-based system using inertial magnetic measurement units and surface electromyography is suitable for objectively and automatically monitoring the lumbar load during physically demanding work. The validity and usability of this system in the uncontrolled real-life working environment of physically active workers are still unknown. The objective of this study was to test the discriminant validity of an artificial neural network-based method for load assessment during actual work. Nine physically active workers performed work-related tasks while wearing the sensor system. The main measure representing lumbar load was the net moment around the L5/S1 intervertebral body, estimated using a method that was based on artificial neural network and perceived workload. The mean differences (MDs) were tested using a paired t-test. During heavy tasks, the net moment (MD = 64.3 ± 13.5%, p = 0.028) and the perceived workload (MD = 5.1 ± 2.1, p < 0.001) observed were significantly higher than during the light tasks. The lumbar load had significantly higher variances during the dynamic tasks (MD = 33.5 ± 36.8%, p = 0.026) and the perceived workload was significantly higher (MD = 2.2 ± 1.5, p = 0.002) than during static tasks. It was concluded that the validity of this sensor-based system was supported because the differences in the lumbar load were consistent with the perceived intensity levels and character of the work tasks.
- Open Access
- 1 January 2021
- Published by Elsevier in Applied Ergonomics
- Vol. 90, 103266
Can breathing gases be analyzed without a mouth mask? Proof-of-concept and concurrent validity of a newly developed design with a mask-less headset
- 1 January 2021
- Published by Elsevier in Applied Ergonomics
- Vol. 90, 103266
Open AccessCan breathing gases be analyzed without a mouth mask? Proof-of-concept and concurrent validity of a newly developed design with a mask-less headset