Yuhuan He
Research Subjects
Yuhuan He has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Xianxian Li
College of Mining
4 shared publicationsShoukun Chen
College of Mining
3 shared publicationsHonggao Xie
2 shared publicationsXijian Li
College of Mining
2 shared publications- Xijian Li
Guizhou University
2 shared publications Chao Xu
College of Mining Guizhou University Guiyang China
1 shared publication
Latest Publications
- 28 February 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (9) , 6020-6036
Study of Key Factors for Efficient Coalbed Methane Extraction: Pore Structure, Desorption Rate and Seepage Characteristics
Effective coalbed methane extraction is a key strategy for boosting natural gas production and storage in addition to raising the safety of the production standard of coal mines. In order to examine the effects of important variables such as pore parameters, desorption rate under temperature and pressure conditions, and seepage capacity on coalbed methane production during the coalbed methane extraction process. The low-temperature nitrogen adsorption tests (LTN2A), methane adsorption/desorption experiments at various temperatures, and the changes in the desorption rate constants, the initial desorption rate, and the desorption rate decay index with temperature and pressure were quantitatively analyzed. And COMSOL software was used to simulate the seepage characteristics of coalbed methane under various reservoir pressures. The results demonstrated that the large interior pore volumes of the samples are beneficial for gas adsorption. Because of its better pore connectivity, the QL sample had a desorption amount that was 55.65% and 48.01% higher at 313.15 and 333.15 K than the WJB sample. The three parameters of k, V1 and kt are at a high level with increasing temperature; hence, the desorption rate peaks at 333.15 K and pressures between 1 and 4 MPa. Furthermore, the WJB sample is more sensitive to the temperature than the QL sample. The COMSOL simulation shows that the methane pressure inside the reservoir can be released better when the reservoir pressure is below 10 MPa. The Darcy seepage rate is fast and stable, which is favorable for the seepage of coalbed methane. The findings show a relationship between the desorption and seepage properties of CBM and its pore structure, which may offer empirical and theoretical support for the successful development of the CBM.
- 28 February 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (9) , 6020-6036
Study of Key Factors for Efficient Coalbed Methane Extraction: Pore Structure, Desorption Rate and Seepage Characteristics
Effective coalbed methane extraction is a key strategy for boosting natural gas production and storage in addition to raising the safety of the production standard of coal mines. In order to examine the effects of important variables such as pore parameters, desorption rate under temperature and pressure conditions, and seepage capacity on coalbed methane production during the coalbed methane extraction process. The low-temperature nitrogen adsorption tests (LTN2A), methane adsorption/desorption experiments at various temperatures, and the changes in the desorption rate constants, the initial desorption rate, and the desorption rate decay index with temperature and pressure were quantitatively analyzed. And COMSOL software was used to simulate the seepage characteristics of coalbed methane under various reservoir pressures. The results demonstrated that the large interior pore volumes of the samples are beneficial for gas adsorption. Because of its better pore connectivity, the QL sample had a desorption amount that was 55.65% and 48.01% higher at 313.15 and 333.15 K than the WJB sample. The three parameters of k, V1 and kt are at a high level with increasing temperature; hence, the desorption rate peaks at 333.15 K and pressures between 1 and 4 MPa. Furthermore, the WJB sample is more sensitive to the temperature than the QL sample. The COMSOL simulation shows that the methane pressure inside the reservoir can be released better when the reservoir pressure is below 10 MPa. The Darcy seepage rate is fast and stable, which is favorable for the seepage of coalbed methane. The findings show a relationship between the desorption and seepage properties of CBM and its pore structure, which may offer empirical and theoretical support for the successful development of the CBM.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Experimental and field verification research on the influence of flow velocity and stress on coalbed methane production
The efficacy of coalbed methane extraction significantly impacts coal mine operations and profitability. To investigate the determinants of this extraction efficacy, we utilized standard core flow velocity stress sensitivity apparatus alongside low-field nuclear magnetic resonance technology. We conducted tests on coal specimens of varying thicknesses to assess quantitatively the extent of damage to the samples, the patterns of permeability and porosity changes, and the effects of stress alterations on permeability. Our findings indicate a direct relationship between the permeability of coal specimens and their thickness. At equivalent flow rates, the velocity sensitivity of thicker coal specimens is notably reduced—by 30.49%—compared to thinner ones. Flow velocity exerts a dual impact on porosity, exhibiting a complex, nonlinear correlation. Net stress demonstrates a heightened sensitivity to the permeability of coal seams, with the stress loading and unloading curves failing to align perfectly. Stress-induced adsorption-desorption processes reveal a pronounced lag effect. Furthermore, dynamic surveillance of bottom hole pressure, water output, and daily gas production from coalbed methane at Wenjiaba Coal Mine revealed that daily gas production initially rises with flow velocity but subsequently declines. It also decreases as bottom hole pressure increases. The observed outcomes closely align with our experimental findings, thereby confirming the validity of our tests. This alignment elucidates the regulatory effects of stress and flow velocity on coalbed methane extraction, offering a theoretical basis for enhancing coalbed methane drainage strategies.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Experimental and field verification research on the influence of flow velocity and stress on coalbed methane production
The efficacy of coalbed methane extraction significantly impacts coal mine operations and profitability. To investigate the determinants of this extraction efficacy, we utilized standard core flow velocity stress sensitivity apparatus alongside low-field nuclear magnetic resonance technology. We conducted tests on coal specimens of varying thicknesses to assess quantitatively the extent of damage to the samples, the patterns of permeability and porosity changes, and the effects of stress alterations on permeability. Our findings indicate a direct relationship between the permeability of coal specimens and their thickness. At equivalent flow rates, the velocity sensitivity of thicker coal specimens is notably reduced—by 30.49%—compared to thinner ones. Flow velocity exerts a dual impact on porosity, exhibiting a complex, nonlinear correlation. Net stress demonstrates a heightened sensitivity to the permeability of coal seams, with the stress loading and unloading curves failing to align perfectly. Stress-induced adsorption-desorption processes reveal a pronounced lag effect. Furthermore, dynamic surveillance of bottom hole pressure, water output, and daily gas production from coalbed methane at Wenjiaba Coal Mine revealed that daily gas production initially rises with flow velocity but subsequently declines. It also decreases as bottom hole pressure increases. The observed outcomes closely align with our experimental findings, thereby confirming the validity of our tests. This alignment elucidates the regulatory effects of stress and flow velocity on coalbed methane extraction, offering a theoretical basis for enhancing coalbed methane drainage strategies.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Dynamics change of coal methane adsorption/desorption and permeability under temperature and stress conditions
Methane adsorption/desorption and permeability measurements are critical for evaluating reserves and production potential in coalbed methane (CBM) extraction. The varying temperature and stress in CBM wells have an impact on these characteristics. To understand these effects, take the Wenjiaba mining area and the Qinglong mining area in Guizhou, China, as the research objects, which are called WJB and QL for short. Characterizing the coal's surface area and pore structure using low-field nuclear magnetic resonance and low-temperature nitrogen adsorption is essential for methane flow and storage. The coal's adsorptive capacity under in situ conditions was revealed by isothermal methane adsorption tests conducted at pressures ranging from 0 to 18 MPa at different temperatures. Triaxial stress-controlled adsorption experiments simulated the impact of effective stress on methane adsorption. Stress-permeability tests evaluated the stress sensitivity and its effect on the coal's methane transmission ability, a key factor in CBM well producibility. The results showed that increased temperature reduced adsorption capacity for WJB and QL coals by 14.2% and 16.3%, respectively, while desorption rates and diffusion coefficients increased, suggesting that higher temperatures enhance desorption and diffusion. However, higher coal ranks can hinder desorption. Effective stress application led to over a 90% decrease in both adsorption capacity and permeability, emphasizing the need for stress management in CBM extraction. These insights provide a theoretical framework for the interplay between coal's pore structure, adsorption/desorption properties, and permeability under different stress and temperature conditions, guiding the optimization of CBM extraction strategies for efficient and sustainable methane recovery.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Dynamics change of coal methane adsorption/desorption and permeability under temperature and stress conditions
Methane adsorption/desorption and permeability measurements are critical for evaluating reserves and production potential in coalbed methane (CBM) extraction. The varying temperature and stress in CBM wells have an impact on these characteristics. To understand these effects, take the Wenjiaba mining area and the Qinglong mining area in Guizhou, China, as the research objects, which are called WJB and QL for short. Characterizing the coal's surface area and pore structure using low-field nuclear magnetic resonance and low-temperature nitrogen adsorption is essential for methane flow and storage. The coal's adsorptive capacity under in situ conditions was revealed by isothermal methane adsorption tests conducted at pressures ranging from 0 to 18 MPa at different temperatures. Triaxial stress-controlled adsorption experiments simulated the impact of effective stress on methane adsorption. Stress-permeability tests evaluated the stress sensitivity and its effect on the coal's methane transmission ability, a key factor in CBM well producibility. The results showed that increased temperature reduced adsorption capacity for WJB and QL coals by 14.2% and 16.3%, respectively, while desorption rates and diffusion coefficients increased, suggesting that higher temperatures enhance desorption and diffusion. However, higher coal ranks can hinder desorption. Effective stress application led to over a 90% decrease in both adsorption capacity and permeability, emphasizing the need for stress management in CBM extraction. These insights provide a theoretical framework for the interplay between coal's pore structure, adsorption/desorption properties, and permeability under different stress and temperature conditions, guiding the optimization of CBM extraction strategies for efficient and sustainable methane recovery.
- Open Access
- 27 December 2023
- Published by Wiley in Energy Science & Engineering
- Vol. 12 (6) , 2322-2340
Research on how acidification affects the coal's microscopic pore structure in the Guizhou mining region
By eliminating their minerals, acidification technology makes coal seams more permeable. Acidification technology were conducted in the Farr and Qinglong mining areas using a mixed acid solution to study the impact of acidification technology on increasing the permeability of primary structural coals in the Guizhou region, China. The microphysical and chemical structure of the coal samples before and after acidification transformation was compared using X‐ray diffraction, scanning electron microscope, mercury intrusion porosimetry, and Fourier transform infrared spectrometry experiments. The results show that after acidification, the volatile matter content is reduced by 4.2% and 16.25%, the carbon content is increased, the degree of coalification is deepened, the gas content of the coal seam is elevated, and the gas source is more abundant. The minerals on the surface are dissolved to different degrees, and the pores and cracks are dredged, so that the surface of the coal samples shows better connectivity, which is conducive to the diffusion and transport of coalbed methane. The volume and pore diameter of the macropore and mesopore in the Farr coal samples were improved after acidification, and the fractal structure was more prominent, the pore connectivity was good, and the pore diameter of the Qinglong coal samples was greatly increased. The content of oxygen‐containing functional groups increased by 11.2% and 2.1%, respectively, which is conducive to the desorption of coalbed methane after acidification, and with the increasing degree of metamorphism of the coal samples, the higher the content of oxygen‐containing functional groups was and the less pronounced the effect of acidification. Acidification technology can effectively remove the minerals in the coal body and has a good effect on penetration enhancement, and the results of the study can provide certain theoretical references for the penetration enhancement of coal seams in Guizhou mining areas.
- 27 December 2023
- Published by Wiley in Energy Science & Engineering
- Vol. 12 (6) , 2322-2340
Open AccessResearch on how acidification affects the coal's microscopic pore structure in the Guizhou mining region
By eliminating their minerals, acidification technology makes coal seams more permeable. Acidification technology were conducted in the Farr and Qinglong mining areas using a mixed acid solution to study the impact of acidification technology on increasing the permeability of primary structural coals in the Guizhou region, China. The microphysical and chemical structure of the coal samples before and after acidification transformation was compared using X‐ray diffraction, scanning electron microscope, mercury intrusion porosimetry, and Fourier transform infrared spectrometry experiments. The results show that after acidification, the volatile matter content is reduced by 4.2% and 16.25%, the carbon content is increased, the degree of coalification is deepened, the gas content of the coal seam is elevated, and the gas source is more abundant. The minerals on the surface are dissolved to different degrees, and the pores and cracks are dredged, so that the surface of the coal samples shows better connectivity, which is conducive to the diffusion and transport of coalbed methane. The volume and pore diameter of the macropore and mesopore in the Farr coal samples were improved after acidification, and the fractal structure was more prominent, the pore connectivity was good, and the pore diameter of the Qinglong coal samples was greatly increased. The content of oxygen‐containing functional groups increased by 11.2% and 2.1%, respectively, which is conducive to the desorption of coalbed methane after acidification, and with the increasing degree of metamorphism of the coal samples, the higher the content of oxygen‐containing functional groups was and the less pronounced the effect of acidification. Acidification technology can effectively remove the minerals in the coal body and has a good effect on penetration enhancement, and the results of the study can provide certain theoretical references for the penetration enhancement of coal seams in Guizhou mining areas.