DLDong Gyu Lee

Dong Gyu Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dong Gyu Lee has a total of 172 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Chemical Functionality Engineering of Anti‐Solvent Additives for Photostable Perovskite Solar Cells

    by Wonjong Lee, Muhammad Adnan, Zobia Irshad, Sunkyu Kim, Siwon Yun, Hyeji Han, Minwoo Lee, Dong Gyu Lee, Hyeonsu Son, Tran Thi Ha Giang, et al.

    Metal‐halide perovskite solar cells (PSCs) achieve high power‐conversion efficiencies but remain susceptible to photo‐induced degradation caused by mobile ions and phase segregation. Here, we investigate positional isomers of pyridine‐carboxylic acid, namely pyridine‐2‐carboxylic acid (2‐PC) and pyridine‐4‐carboxylic acid (4‐PC), as anti‐solvent additives to clarify how functional‐group orientation governs defect passivation and photo‐induced degradation. Both additives improve film morphology and reduce trap density; however, 4‐PC, in which the carboxyl group is positioned opposite the pyridine nitrogen, provides markedly stronger passivation by virtue of its more favorable passivation geometry. As a result, 4‐PC suppresses light‐induced photoluminescence red shift, reduces trap density by approximately 27%, and enables unencapsulated devices to retain over 88% of their initial efficiency after 1000 h. Spectroscopic and transient analyses further indicate that 4‐PC simultaneously passivates Pb‐related defects and halide vacancies, thereby suppressing ion migration and halide phase segregation under operating conditions. These findings establish positional‐isomer engineering as a practical molecular design principle for developing simple yet effective anti‐solvent additives toward improved photo‐induced phase stability in perovskite photovoltaics.

  • Open Access

    Counter‐Halide‐Directed Ion‐Pair Passivation Enables High‐Performance Wide‐Bandgap Perovskites for Perovskite/Cu(In,Ga)Se 2 Tandem Solar Cells

    by Huyen Tran, Dong Gyu Lee, Ahreum Lee, Inchan Hwang, Van Hung Tran, Jun Hyeok Choi, Junseop Byeon, Yu Jin Kim, Sang Hwan Nam, Jihye Gwak, et al.

    Wide‐bandgap (WBG) perovskites (PVSK) are key top‐cell absorbers for tandem photovoltaics but remain limited by severe open‐circuit voltage ( V OC ) losses and photoinduced halide segregation. Since iodide‐ and bromide‐related defects coexist at the surface and bulk of Br/I mixed‐halide WBG PVSK, the counter‐halide identity in ammonium passivators may critically influence defect passivation effectiveness. Moreover, while deprotonation of ammonium passivator has emerged as an important factor governing interfacial stability, its discussion has focused mainly on organic cation structure, leaving the counter‐halide's role in regulating deprotonation‐driven side reactions largely unexplored. Here, we establish a counter‐halide‐directed ion‐pair passivation strategy using 4‐fluorobenzylammonium halides (FBz‐Cl, FBz‐Br, and FBz‐I). Density functional theory calculations combined with optoelectronic and interfacial characterizations reveal that the counter‐halide simultaneously governs defect‐binding affinity, nonradiative recombination, energy‐level alignment, and deprotonation‐driven degradation. Among the passivators, FBz‐Br achieves the optimal balance of strong defect passivation, favorable band alignment with C 60 , and enhanced stability. Consequently, FBz‐Br‐treated PVSK exhibits suppressed nonradiative recombination and reduced V OC deficit, delivering a power conversion efficiency (PCE) of 21.89% with improved resistance to moisture, thermal, and light‐induced degradation. Integrated with Cu(In,Ga)Se 2 (CIGS) bottom cells, the optimized WBG PVSK enables PVSK/CIGS tandem solar cells with PCEs of 29.51% in four‐terminal and 25.65% in two‐terminal configurations.

  • Open Access

    Helicity‐Defined Analog Conductance States in Chiral Perovskite Synapses

    by Min Jong Lee, Hyoungwook Cho, Sang Heon Lee, Ohhyun Kwon, Minil Kang, Dong Gyu Lee, Seongwon Lee, Tae Kyung Lee, Gyeong Min Lee, Minseong Um, et al.

    Optoelectronic synapses encode light through scalar variables (i.e., intensity or wavelength), leaving inputs that differ only in field symmetry indistinguishable at the hardware level. Circularly polarized light introduces helicity as a symmetry‐defined degree of freedom; however, the conversion into persistent analog memory remains challenging. This study demonstrates that optical helicity biases the electrically driven formation of persistent analog conductance states in chiral quasi‐two‐dimensional perovskite synapses. Within the (R/S‐PEA) 2 MA n ‐1 Pb n I 3 n +1 multi‐quantum‐well series, the n = 3 composition provided the optimal convergence of chiroptical selectivity, layered structural registry, and transport‐supporting structural order, enabling reproducible low‐nonlinearity analog weight updates and 72 statistically distinguishable conductance states retained over 10 6 s. An independently evaluated read‐noise‐informed framework yielded a read‐noise‐limited capacity estimate of 72.3 levels, providing a quantitative link between measured read noise and analog‐state capacity. In conclusion, optical helicity can be encoded into, retained in, and read from electrically programmed analog conductance states, providing a persistent state variable for neuromorphic computation.

  • Eliminating Texture‐Induced Retention of Self‐Assembled Monolayer Residues for High‐Performance Perovskite Solar Cells

    by Dongmin Lee, Dong Gyu Lee, Jung Geon Son, Minseong Kim, Chang Hyeon Yoon, Jaehwi Lee, Hyungsu Jang, Jongdeuk Seo, Dongshin Kim, Young‐Ki Kim, et al.

    Self‐assembled monolayers (SAMs) constitute foundational interfacial elements in high‐efficiency inverted perovskite solar cells (PSCs); however, ensuring chemical and electronic integrity across SAM‐modified interfaces remains challenging. Although post‐deposition solvent washing has been widely applied to remove loosely bound or aggregated SAM species, its topography‐dependent consequences for SAM‐modified textured FTO, including retention and solvent‐dependent removal, have not been systematically examined. Here, we identify texture‐induced retention of π–π‐stacked SAM aggregates within nanoscale valleys of FTO, rendering them resistant to conventional alcohol‐based washing. To address this limitation, we establish a substrate‐informed solvent engineering strategy that balances removal of SAM aggregates with preservation of chemisorbed SAMs. Complementary crystallographic and theoretical analyses reveal that N, N ‐dimethylformamide (DMF) provides the most balanced solvent–SAM interaction window among examined solvents, enabling removal of valley‐retained residues while maintaining the chemisorbed SAM interface. The resulting interfacial refinement establishes a homogeneous electrostatic landscape and improved energy alignment at the perovskite/SAM interface, while serving as a uniform growth template for high‐quality, strain‐relieved perovskite films. Consequently, DMF‐washed devices achieve a power conversion efficiency of 26.13% (certified 25.82%) and demonstrate enhanced stability under illumination and thermal stress. These findings highlight substrate‐informed solvent washing as a reliable strategy for SAM‐based interfacial engineering on textured electrodes.

  • Open Access

    Harnessing Selective Defect Formation for Filament Control in Reliable and Energy‐Efficient Perovskite Resistive Random Access Memory

    by Sang Heon Lee, Seung Su Shin, Yubhin Cho, Min Jong Lee, Sung Su Yoon, Dong Gyu Lee, Seon Joong Kim, Seunghyun Oh, Ohhyun Kwon, Gyeong Min Lee, et al.

    Halide perovskite memristors are emerging as compelling platforms for in‐memory computing because their low ionic migration energies and compositional versatility enable tunable conductance states. However, previous studies have primarily focused on defect passivation to improve device reliability, with limited exploration of designs that harness defects as preferential pathways for controlled filament growth. Here, a defect‐engineering strategy based on the differential modulation of vacancy formation energetics is introduced wherein the incorporation of poly(quaternized dimethylaminoethyl methacrylate) iodide (PAQI), a quaternary‐ammonium polymer, into formamidinium lead triiodide (FAPbI 3 ) facilitates conductive filament formation. PAQI‐induced Pb–I bond weakening decreases the formation energy of iodine vacancies (V I ), selectively activating V I that contribute to the percolation pathways for metal cation transport during resistive switching. Furthermore, the functional groups of PAQI passivate the undercoordinated Pb 2+ in the perovskite, enabling an exceptionally low switching voltage ( V SET = 0.28 V) and SET energy consumption (3.64 pJ), along with stable retention (<4% current fluctuation). Using a 7 × 7 crossbar array, the device demonstrated selective recognition of optoelectronic input patterns and high‐fidelity edge detection, comparable to software convolution. These results highlight a transformative approach that exploits defects as functional elements in halide perovskites and offers scalable pathways for high‐performance memristive systems.

  • Open Access

    Hydrogen Bonding Denticity Governs Surface Modulation in Inorganic Perovskite Nanocrystals

    by Jiaxin Song, Gyeong Eun Seok, Junsu Son, Woo Hyeon Jeong, Dong Gyu Lee, Sung Woo Jang, Xinyu Shen, Gayoung Seo, Zhongkai Yu, Dongyeong Gim, et al.

    All‐inorganic CsPbI 3 perovskite nanocrystals (PNCs) have emerged as promising emitters for optoelectronic applications owing to their high color purity, tunable bandgap, and high photoluminescence quantum yield (PLQY). However, dynamic surface ligands, abundant trap states, and rapid halide ion migration limit their emission efficiency and operational stability. Here, methylammonium (MA + ), formamidinium (FA + ), and guanidinium (GA + ) were systematically investigated as surface modulators for PNCs via an anti‐solvent‐assisted post‐treatment strategy. Spectroscopic analyses and density functional theory calculations reveal that the passivation efficacy is determined by the strength and denticity of hydrogen‐bonding interactions between the organic cations and the PNC surface. Among the three candidates, GA + exhibits the highest efficacy owing to its trifunctional N─H groups, which enable robust multidentate surface interactions that suppress trap formation and halide ion migration. As a result, GA‐treated PNCs achieve a PLQY of 99.3% and retain ∼80% of their initial PLQY after 9 days under ambient conditions. The resulting perovskite light‐emitting diodes deliver a maximum external quantum efficiency of 10.2% and a maximum luminance of 473 cd m −2 , representing a significant improvement over pristine devices. These findings identify molecular hydrogen‐bonding geometry as a key design parameter for surface engineering of efficient and stable PNC‐based optoelectronic devices.

  • Open Access

    Surface‐Functionalized MXene for Enhanced Photocatalytic CO 2 Reduction

    by Dongyun Kim, Young Ho Park, Dong Gyu Lee, Kyuseok Lee, Junho Lee, Chaelin Shin, Jaeyoung Kim, B. Yamunasree, Soomin Han, Eunhee Gong, et al.

    MXenes have emerged as promising conductive and surface‐active materials for designing efficient photocatalytic systems for CO 2 ‐to‐hydrocarbon conversion, but their limited active sites and oxidation vulnerability remain major challenges. Herein, we report poly(catechol/p‐cresol) (PCA‐PCR) ligand‐functionalized MXene ( f ‐MXene) that exhibits enhanced oxidation stability under moisture‐involved conditions while largely preserving the electrical conductivity. The f ‐MXene is integrated with reduced TiO 2 (RT) semiconductor and copper (Cu) cocatalyst to construct a Cu/ f ‐MXene/RT ternary composite, which exhibits strong interfacial coupling and favorable band alignment, enabling efficient electron transfer from RT through f ‐MXene to Cu active sites. The optimized Cu/ f ‐MXene/RT catalyst achieves a CH 4 yield of 18.1 µmol g −1 , representing over 200‐fold enhancement compared to RT and more than double that of the Cu/MXene/RT. Synergistic interactions between Cu and f ‐MXene are essential, as neither component alone with RT achieves comparable activity. Moreover, the Cu/ f ‐MXene/RT catalyst also demonstrates superior cycling stability compared to the Cu/MXene/RT. Density functional theory (DFT) calculations indicate that the PCA‐PCR ligand suppresses excessive electron localization at Cu sites and promotes charge transfer to adsorbed CO 2 , facilitating its activation. This work demonstrates that ligand‐functionalized MXenes enable synergistic control over interfacial charge transport and structural stability, providing a robust strategy for designing advanced photocatalytic systems.


  • Open Access

    Structurally Stabilized Hydrogen‐Bonded Bridging Networks for Defect‐Passivated Cesium Lead Iodide Perovskite Quantum Dot Photovoltaics

    by Minju Yang, Dong Gyu Lee, Seon Joong Kim, Hyungju Ahn, Jun Hyeok Choi, Sungjae Park, Uje Choi, Kyoungwon Park, Kwanpyo Kim, Tae Kyung Lee, et al.

    Lead‐halide perovskite quantum dots (PQDs) are promising materials for next‐generation photovoltaics (PVs). However, the fabrication of dense PQD films induces volume contraction and residual stress, generating undercoordinated surface defects that limit device performance and stability. To address these limitations, a bifunctional ligand, 4‐(1H‐imidazol‐2‐yl)benzoic acid (4‐ImBA), was designed to concurrently passivate surface defects and establish a dynamic hydrogen‐bonded bridging network. In contrast to conventional passivation strategies, this network is likely to alleviate internal stress accumulated during film assembly, thereby contributing to the suppression of further defect generation. The 4‐ImBA‐passivated device achieved a 1‐sun power conversion efficiency (PCE) of 14.5% (vs. 13.0% control) and an indoor PCE of 38.4% (vs. 34.2% control) (6500 K LED, Irradiance: 0.291 mW cm −2 ), retaining 88% of its initial PCE under ambient conditions. Extending this strategy to luminescent solar concentrators (LSCs), the enhanced photoluminescence quantum yield produced a high external quantum efficiency of 33.56%, yielding a total LSC‐PQD PV module efficiency of 7.9% under indoor LED illumination (Irradiance: 0.291 mW cm −2 ). These results demonstrate that hydrogen‐bonded networks within a hybrid perovskite quantum dot platform represent a robust strategy for stable PQD optoelectronics.

  • Open Access

    Direct Integration of Conductive, Emissive Perovskite Nanocrystals Into Efficient Light‐Emitting Diodes Without Post‐Synthetic Ligand Exchange

    by Jigeon Kim, Yubin Lee, Gyeong Eun Seok, Dong Gyu Lee, Seongwon Lee, Huieun Kim, Sung Woo Jang, Wooyeon Kim, Wondo Choi, Woo Hyeon Jeong, et al.

    Colloidal perovskite nanocrystals (PNCs) have emerged as promising candidates for optoelectronic applications, leveraging their excellent optical, photophysical, and electrical properties combined with solution processability. However, the electrically insulating nature of conventional long‐chain ligands necessitates post‐synthetic ligand exchange for practical device integration. Here, we demonstrate that a synthetically engineered surface chemistry, featuring a low ligand density and robust halide passivation, enables the direct integration of colloidal PNCs into optoelectronic devices without a ligand exchange process. This is achieved by synthesizing CsPbBr 3 PNCs stabilized with Br – instead of anionic oleate ligands. Due to the stronger binding of the OAM/Br − ligand system to the CsPbBr 3 surface, compared to the OAM/oleate system, the resultant PNCs show suppressed surface defect formation and improved optical properties. The reduced surface ligand density allows for higher charge carrier mobility in the PNC thin films relative to their oleate‐capped counterparts. Without post‐synthetic ligand exchange, the colloidal PNCs are directly integrated into light‐emitting diodes, achieving enhanced charge carrier injection and a higher maximum external quantum efficiency of 11.4%, compared to 2.7% for conventional PNC‐based devices.

  • Oxidation-Safe p-Doping of Tin–Lead Perovskites Enabled by an Anion-Anchoring Bifunctional Copolymer

    by ChaeEun Lee, Jong Chan Shin, Sang Wook Park, Dohun Baek, Seohyeon Ban, Doyun Kim, Dongwook Lee, Dong Gyu Lee, Tae Kyung Lee, Minjae Lee, et al.

    Tin–lead perovskites (TLPs) offer near-optimal bandgaps but suffer from spontaneous Sn2+ oxidation and imbalanced charge transport. Conventional p-dopants improve hole extraction yet exacerbate Sn2+ oxidation, creating a fundamental design conflict. Here, we resolve this conflict with a bifunctional copolymer additive, poly(pyrrolidinium-Jeffamine) hexafluorophosphate (PPJ-PF6), in which the polypyrrolidinium backbone electrostatically anchors PF6− at defect-rich grain boundaries for controlled, non-destructive p-doping, while the Jeffamine polyether segment coordinates and protects Sn2+ against oxidation. Density functional theory calculations confirm favorable polymer–perovskite binding and show that PF6−-induced Fermi-level downshift operates only when the anion is retained within the polymer scaffold. This cooperative mechanism suppresses trap-assisted recombination, improves energy-level alignment, and enhances hole mobility, delivering a champion PCE of 22.8% (from a 21.4% baseline), with unencapsulated devices retaining ∼80% of initial efficiency after 500 h. These results establish a generalizable design principle: bifunctional polymer scaffolds enabling p-doping while protecting the oxidation-sensitive Sn sublattice.