Rui Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rui Zhang has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Christoph Schick
University of Rostock
7 shared publications - Katalee Jariyavidyanont
Interdisciplinary Center for Transfer-oriented Research in Natural Sciences (IWE TFN), Martin Luther University Halle-Wittenberg, 06099 Halle/Saale, Germany
6 shared publications - René Androsch
Martin Luther University Halle-Wittenberg
6 shared publications Bao Wang
Institute of Zhejiang University‐Quzhou, College of Chemical and Biological Engineering, Zhejiang University Hangzhou China
3 shared publications- Evgeny Zhuravlev
State Key Laboratory of Coordination Chemistry, Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China
3 shared publications Mengxue Du
Interdisciplinary Center for Transfer‐Oriented Research in Natural Sciences Martin Luther University Halle‐Wittenberg Halle (Saale) Germany
3 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 694
Effects of temperature scanning rate and crystal nuclei density on the enthalpy and peak-temperature of crystallization
- 29 October 2026
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 694
Open AccessEffects of temperature scanning rate and crystal nuclei density on the enthalpy and peak-temperature of crystallization
- Open Access
- 27 June 2026
- Published by Wiley in Journal of Polymer Science
Opposite Trends in Glass Transition and Vogel Temperatures in Long‐Chain Branched Poly( l ‐Lactic Acid)
Poly( l ‐lactic acid) (PLLA) is widely used as both a commodity thermoplastic and for engineering applications, for example, in 3D printing. Typically, the material is used at temperatures near room temperature, approximately 30 K below the glass transition temperature ( T g ) measured by differential scanning calorimetry (DSC). Understanding the glass transition dynamics is therefore important for optimizing the material performance. In this study, the T g of linear and long‐chain branched PLLA were systematically investigated over a broad range of cooling rates spanning five orders of magnitude, using fast scanning calorimetry (FSC) and DSC, employing Tool's method. The obtained limiting fictive temperatures were fitted using a Vogel–Fulcher–Tammann–Hesse (VFTH)‐like equation, allowing determination of both the Vogel temperature ( T v ) and the dynamic fragility. The results reveal that T g , as determined by conventional DSC, increases from 326 K to 329 K while T v decreases from 271 K to 255 K as the number of branch points per molecule increases from 0 to 3.3. These opposing trends in T g and T v are accompanied by a significant reduction in dynamic fragility, with PLLA becoming a stronger glass former as the degree of long‐chain branching increases.
- 27 June 2026
- Published by Wiley in Journal of Polymer Science
Open AccessOpposite Trends in Glass Transition and Vogel Temperatures in Long‐Chain Branched Poly( l ‐Lactic Acid)
Poly( l ‐lactic acid) (PLLA) is widely used as both a commodity thermoplastic and for engineering applications, for example, in 3D printing. Typically, the material is used at temperatures near room temperature, approximately 30 K below the glass transition temperature ( T g ) measured by differential scanning calorimetry (DSC). Understanding the glass transition dynamics is therefore important for optimizing the material performance. In this study, the T g of linear and long‐chain branched PLLA were systematically investigated over a broad range of cooling rates spanning five orders of magnitude, using fast scanning calorimetry (FSC) and DSC, employing Tool's method. The obtained limiting fictive temperatures were fitted using a Vogel–Fulcher–Tammann–Hesse (VFTH)‐like equation, allowing determination of both the Vogel temperature ( T v ) and the dynamic fragility. The results reveal that T g , as determined by conventional DSC, increases from 326 K to 329 K while T v decreases from 271 K to 255 K as the number of branch points per molecule increases from 0 to 3.3. These opposing trends in T g and T v are accompanied by a significant reduction in dynamic fragility, with PLLA becoming a stronger glass former as the degree of long‐chain branching increases.
- Open Access
- 28 April 2026
- Published by Wiley in Polymer International
Extruder‐based 3D printing of eco‐friendly polymers
Extruder‐based 3D printing is a flexible and efficient technique for processing polymer materials. This method is also attractive for the fabrication of products from biodegradable and recycled polymers, thereby supporting the development of more sustainable solutions to address environmental concerns. Both biodegradable and recycled polymers have significant potential for producing high‐quality 3D‐printed parts, provided that their properties and characteristics meet the requirements of extruder‐based 3D printing. However, challenges remain regarding the application of these materials, including issues related to cost, availability and material collection. Furthermore, physical behaviors such as melting, self‐nucleation, physical aging, relaxation and crystallization play a crucial role during and after the 3D printing process. These phenomena influence the formation of the internal structure and, consequently, the final properties of the printed products. The impact of these physical behaviors can vary significantly depending on the specific polymer used. Therefore, future research should focus on comprehensive investigations of the structure–property relationships under extruder‐based 3D printing conditions to advance the application of biodegradable and recycled polymers in additive manufacturing and other advanced manufacturing fields. © 2026 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
- 28 April 2026
- Published by Wiley in Polymer International
Open AccessExtruder‐based 3D printing of eco‐friendly polymers
Extruder‐based 3D printing is a flexible and efficient technique for processing polymer materials. This method is also attractive for the fabrication of products from biodegradable and recycled polymers, thereby supporting the development of more sustainable solutions to address environmental concerns. Both biodegradable and recycled polymers have significant potential for producing high‐quality 3D‐printed parts, provided that their properties and characteristics meet the requirements of extruder‐based 3D printing. However, challenges remain regarding the application of these materials, including issues related to cost, availability and material collection. Furthermore, physical behaviors such as melting, self‐nucleation, physical aging, relaxation and crystallization play a crucial role during and after the 3D printing process. These phenomena influence the formation of the internal structure and, consequently, the final properties of the printed products. The impact of these physical behaviors can vary significantly depending on the specific polymer used. Therefore, future research should focus on comprehensive investigations of the structure–property relationships under extruder‐based 3D printing conditions to advance the application of biodegradable and recycled polymers in additive manufacturing and other advanced manufacturing fields. © 2026 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
- Open Access
- 18 December 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (1) , 379-391
Homogeneous Crystal Nucleation of Poly(3-hydroxybutyrate): Kinetics, Stability, and Cluster-Size Distribution
The kinetics of homogeneous crystal nucleation in poly(3-hydroxybutyrate) (P3HB) near its glass transition temperature (Tg) was investigated using fast scanning calorimetry (FSC) combined with Tammann’s two-stage crystal nuclei development method. Crystallization on cooling is fully suppressed at rates of a few K/s, while the formation of crystal nuclei is inhibited only at higher rates, above around 100 K/s. The formation of homogeneous nuclei is fastest at around 40 °C (approximately 30 K above Tg), with an onset time of their formation of about 1 s, which is two orders of magnitude shorter than the crystallization onset time. To evaluate their thermal stability, a modified Tammann nucleation experiment involving a temperature spike before the growth stage was employed. The number of homogeneous nuclei of supercritical size at the growth temperature formed under the given conditions remained nearly constant upon heating up to about 100 K above their formation temperature. Beyond this limit, the number of surviving nuclei drastically decreased, and complete dissolution was observed at about 120 K above the temperature of their formation. Besides the finding of an exceptionally high stability of homogeneous crystal nuclei of P3HB, the sharp disappearance of the number of nuclei within a narrow temperature range of 10–15 K suggests a sharp truncation of the nuclei-size distribution for larger nuclei.
- 18 December 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (1) , 379-391
Open AccessHomogeneous Crystal Nucleation of Poly(3-hydroxybutyrate): Kinetics, Stability, and Cluster-Size Distribution
The kinetics of homogeneous crystal nucleation in poly(3-hydroxybutyrate) (P3HB) near its glass transition temperature (Tg) was investigated using fast scanning calorimetry (FSC) combined with Tammann’s two-stage crystal nuclei development method. Crystallization on cooling is fully suppressed at rates of a few K/s, while the formation of crystal nuclei is inhibited only at higher rates, above around 100 K/s. The formation of homogeneous nuclei is fastest at around 40 °C (approximately 30 K above Tg), with an onset time of their formation of about 1 s, which is two orders of magnitude shorter than the crystallization onset time. To evaluate their thermal stability, a modified Tammann nucleation experiment involving a temperature spike before the growth stage was employed. The number of homogeneous nuclei of supercritical size at the growth temperature formed under the given conditions remained nearly constant upon heating up to about 100 K above their formation temperature. Beyond this limit, the number of surviving nuclei drastically decreased, and complete dissolution was observed at about 120 K above the temperature of their formation. Besides the finding of an exceptionally high stability of homogeneous crystal nuclei of P3HB, the sharp disappearance of the number of nuclei within a narrow temperature range of 10–15 K suggests a sharp truncation of the nuclei-size distribution for larger nuclei.
- 26 April 2025
- Published by American Chemical Society (ACS) in Accounts of Materials Research
- Vol. 6 (5) , 627-637
Fast Scanning Calorimetry of Semicrystalline Polymers: From Fundamental Research to Industrial Applications
- 26 April 2025
- Published by American Chemical Society (ACS) in Accounts of Materials Research
- Vol. 6 (5) , 627-637
Fast Scanning Calorimetry of Semicrystalline Polymers: From Fundamental Research to Industrial Applications
- 20 July 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (15) , 7369-7380
Temperature-Dependent Triple Crystal Polymorphism of Poly(hexamethylene terephthalate): Long-Range Ordered Mesophase Formation and Crystal Structure–Property Relationships
- 20 July 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (15) , 7369-7380
Temperature-Dependent Triple Crystal Polymorphism of Poly(hexamethylene terephthalate): Long-Range Ordered Mesophase Formation and Crystal Structure–Property Relationships
- 10 June 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (12) , 5780-5787
Interplay between Chain Relaxation Time and Melt Crystallization Time in Microinjection Molding of Polyoxymethylene
- 10 June 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (12) , 5780-5787
Interplay between Chain Relaxation Time and Melt Crystallization Time in Microinjection Molding of Polyoxymethylene
- 28 December 2023
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (1) , 32-41
Physical Aging and Glass Transition Dynamics of Semicrystalline Poly(lactic acid) for 3D-Printing Applications Investigated by Fast Scanning Calorimetry
- 28 December 2023
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (1) , 32-41
Physical Aging and Glass Transition Dynamics of Semicrystalline Poly(lactic acid) for 3D-Printing Applications Investigated by Fast Scanning Calorimetry