Junfeng Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Junfeng Cheng has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Chunlin Liu
Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, China
7 shared publications Dun Wu
Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials School of Materials Science and Engineering Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering Changzhou University Changzhou 213164 China
5 shared publications- Zheng Cao
Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering Changzhou University Changzhou China
5 shared publications Chunlin Liu
4 shared publicationsShuyu Hou
Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, China
3 shared publicationsZheng Cao
Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials School of Materials Science and Engineering Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering Changzhou University Changzhou 213164 China
3 shared publications
Latest Publications
- 1 September 2026
- Published by Springer Nature in Journal of Materials Research
- Vol. 41 (17) , 2768-2782
High-contrast laser marking on LLDPE via TiO2 photothermal conversion for controllable carbonization patterning
- 1 September 2026
- Published by Springer Nature in Journal of Materials Research
- Vol. 41 (17) , 2768-2782
High-contrast laser marking on LLDPE via TiO2 photothermal conversion for controllable carbonization patterning
- Open Access
- 9 February 2026
- Published by Elsevier in Journal of Science: Advanced Materials and Devices
- Vol. 11 (2)
Laser-induced in-situ carbonization of polystyrene for the facile fabrication of core-shell Fe3O4@LIG magnetic adsorbents with efficient dye removal performance
- 9 February 2026
- Published by Elsevier in Journal of Science: Advanced Materials and Devices
- Vol. 11 (2)
Open AccessLaser-induced in-situ carbonization of polystyrene for the facile fabrication of core-shell Fe3O4@LIG magnetic adsorbents with efficient dye removal performance
- 28 October 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (22)
Laser‐Programmed 3D Gradient Architectures in Transparent Polymer Films for Dynamic Information Encryption and Anti‐Counterfeiting
Transparent polymer films face critical limitations in dynamic information encryption, including irreversible transparency loss, simplistic encrypted patterns, and the absence of active security mechanisms. To overcome these, this study proposes a laser‐programming strategy using polyvinyl alcohol composites synergistically doped with carbon nanotubes (50 ppm) and glucose monohydrate (4 wt%). This system maintains > 60% transmittance while enabling cross‐dimensional structural and chromatic responses: low‐energy irradiation induces 2D translucent whitening via grain‐boundary scattering (Δ E = 3.04–14.96); medium energy triggers milky‐white 3D foaming with 1162 µm height differential; high energy drives gradient carbonization (from charred yellow to brown, Δ E = 26.66–42.98). Leveraging precise energy‐threshold control, this study develops dual encryption paradigms: 1) Hydro‐triggered concealment/laser decryption enables water‐driven reversible erasure (>95% transmittance recovery) with selective background whitening for “opaque‐background/transparent‐message” revelation; 2) Dual‐laser‐threshold encryption combines sub‐threshold invisible writing (<5% transmittance variation) and localized foaming/carbonization development. Both integrate auto‐destruct security, where supra‐critical energy irreversibly destroys data. The film exhibits exceptional stability (abrasion/bending/aging resistance) and dynamic optical/tactile feedback, providing mask‐free single‐step fabrication of high‐security anti‐counterfeiting features that bridge transparent‐substrate encryption from concept to practical applications.
- 28 October 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (22)
Laser‐Programmed 3D Gradient Architectures in Transparent Polymer Films for Dynamic Information Encryption and Anti‐Counterfeiting
Transparent polymer films face critical limitations in dynamic information encryption, including irreversible transparency loss, simplistic encrypted patterns, and the absence of active security mechanisms. To overcome these, this study proposes a laser‐programming strategy using polyvinyl alcohol composites synergistically doped with carbon nanotubes (50 ppm) and glucose monohydrate (4 wt%). This system maintains > 60% transmittance while enabling cross‐dimensional structural and chromatic responses: low‐energy irradiation induces 2D translucent whitening via grain‐boundary scattering (Δ E = 3.04–14.96); medium energy triggers milky‐white 3D foaming with 1162 µm height differential; high energy drives gradient carbonization (from charred yellow to brown, Δ E = 26.66–42.98). Leveraging precise energy‐threshold control, this study develops dual encryption paradigms: 1) Hydro‐triggered concealment/laser decryption enables water‐driven reversible erasure (>95% transmittance recovery) with selective background whitening for “opaque‐background/transparent‐message” revelation; 2) Dual‐laser‐threshold encryption combines sub‐threshold invisible writing (<5% transmittance variation) and localized foaming/carbonization development. Both integrate auto‐destruct security, where supra‐critical energy irreversibly destroys data. The film exhibits exceptional stability (abrasion/bending/aging resistance) and dynamic optical/tactile feedback, providing mask‐free single‐step fabrication of high‐security anti‐counterfeiting features that bridge transparent‐substrate encryption from concept to practical applications.
- 25 January 2024
- Published by Springer Nature in Journal of Porous Materials
- Vol. 31 (2) , 737-746
Green synthesis of porous bamboo-based activated carbon with high VOCs adsorption performance via steam activation method
- 25 January 2024
- Published by Springer Nature in Journal of Porous Materials
- Vol. 31 (2) , 737-746
Green synthesis of porous bamboo-based activated carbon with high VOCs adsorption performance via steam activation method
- 8 September 2022
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 45 (4) , 1-9
Carbon nanotubes in near-infrared laser irradiation for locally controllable surface foaming of polypropylene
- 8 September 2022
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 45 (4) , 1-9
Carbon nanotubes in near-infrared laser irradiation for locally controllable surface foaming of polypropylene
- Open Access
- 5 July 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (13) , 7477
Laser Shock Fabrication of Nitrogen Doped Inverse Spinel Fe3O4/Carbon Nanosheet Film Electrodes towards Hydrogen Evolution Reactions in Alkaline Media
The reliable and cost-effective production of high-performance film electrodes for hydrogen evolution reactions remains a challenge for the laser surface modification community. In this study, prior to a thermal imidization reaction, a small number of Fe3O4 nanoparticles were vortexed into a poly(amic acid) (PAA) prepolymer, and the achieved flat composite film was then ablated by a 1064 nm fiber laser. After laser irradiation, the hierarchical architectures of carbon nanosheets decorated with Fe3O4 nanoparticles were generated. Although pure polyimide (PI) film and laser carbonized PI film, as well as bare Fe3O4, showcase poor intrinsic catalytic activity toward alkaline hydrogen evolution reactions, our laser-derived Fe3O4/carbon nanosheet hybrid film demonstrated enhanced electrocatalytic activity and stability in 1 M KOH electrolyte; the overpotential(η10) reached 247 mV when the current density was 10 mA cm−2 with a slight current decay in the chronoamperometric examination of 12 h. Finally, we proposed that the substitution of N to O in Fe−O sites of trans spinel structured magnetite would be able to modulate the free energy of hydrogen adsorption (ΔGH*) and accelerate water dissociation.
- 5 July 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (13) , 7477
Open AccessLaser Shock Fabrication of Nitrogen Doped Inverse Spinel Fe3O4/Carbon Nanosheet Film Electrodes towards Hydrogen Evolution Reactions in Alkaline Media
The reliable and cost-effective production of high-performance film electrodes for hydrogen evolution reactions remains a challenge for the laser surface modification community. In this study, prior to a thermal imidization reaction, a small number of Fe3O4 nanoparticles were vortexed into a poly(amic acid) (PAA) prepolymer, and the achieved flat composite film was then ablated by a 1064 nm fiber laser. After laser irradiation, the hierarchical architectures of carbon nanosheets decorated with Fe3O4 nanoparticles were generated. Although pure polyimide (PI) film and laser carbonized PI film, as well as bare Fe3O4, showcase poor intrinsic catalytic activity toward alkaline hydrogen evolution reactions, our laser-derived Fe3O4/carbon nanosheet hybrid film demonstrated enhanced electrocatalytic activity and stability in 1 M KOH electrolyte; the overpotential(η10) reached 247 mV when the current density was 10 mA cm−2 with a slight current decay in the chronoamperometric examination of 12 h. Finally, we proposed that the substitution of N to O in Fe−O sites of trans spinel structured magnetite would be able to modulate the free energy of hydrogen adsorption (ΔGH*) and accelerate water dissociation.
- Open Access
- 25 March 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (13) , 9129-9140
Preparation and Laser Marking Properties of Poly(propylene)/Molybdenum Sulfide Composite Materials
- 25 March 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (13) , 9129-9140
Open AccessPreparation and Laser Marking Properties of Poly(propylene)/Molybdenum Sulfide Composite Materials
- Open Access
- 1 January 2021
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 9 (8) , 1447-1462
Preparation and Properties of Polyacrylamide/Sodium Alginate Hydrogel and the Effect of Fe Adsorption on Its Mechanical Performance
The preparation and application of functional hydrogels based on natural polysaccharides have always been a hot research topic. In this study, using acrylamide (AM) monomer, N, N'-methylene bisacrylamide (MBA) as cross-linking agent, potassium persulfate (K2S2O8) as initiator, in the presence of natural polysaccharide sodium alginate (SA), the PAM/SA hydrogel was prepared by free radical polymerization. Fourier transform infrared spectroscopy (FT-IR), swelling performance tests, scanning electron microscope (SEM), thermogravimetric analysis (TGA), UV-visible spectrophotometer, mechanical property measurements were carried out to analyze the composition, morphology, and performance of the hydrogels. The swelling behavior, dye adsorption performance, and the mechanical properties of PAM/SA hydrogels before and after Fe3+ adsorption were studied. The experimental results showed that the introduction of SA with 4.7%, 7.8%, and 10.3% effectively improved the mechanical and dye adsorption properties of PAM composite hydrogels. The adsorption capacity of PAM/4.7%SA and PAM/10.3%SA hydrogels at equilibrium can reach 40.01 and 44.02 mg/g for methylene blue, which is higher than the value 13.58 mg/g of pure PAM hydrogel. The compressive strength of pure PAM hydrogel is 0.124 MPa. When the SA content is 4.7%, 7.8%, and 10.3%, the compressive strength of the PAM/SA hydrogel was corresponding to 0.130 MPa, 0.134 MPa, and 0.152 MPa, respectively. Fe3+ was introduced into the PAM/SA hydrogels, and PAM/SA/Fe3+ double-network hydrogels with excellent mechanical properties could be prepared by adjusting the SA content (4.7%, 7.8%, and 10.3%), soaking time (1 h, 2 h, 3 h, 4 h, 5 h, 6 h), and Fe3+ concentration (4.76%, 7.41%, 9.09%, and 13.04%). Under the same Fe3+ concentration of 9.09% and adsorption time of 4 h, the compressive strengths of the PAM/4.7%SA, PAM/7.8%SA, and PAM/10.3%SA hydrogels could reach 0.354 MPa, 0.767 MPa, and 0.778 MPa, respectively.
- 1 January 2021
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 9 (8) , 1447-1462
Open AccessPreparation and Properties of Polyacrylamide/Sodium Alginate Hydrogel and the Effect of Fe Adsorption on Its Mechanical Performance
The preparation and application of functional hydrogels based on natural polysaccharides have always been a hot research topic. In this study, using acrylamide (AM) monomer, N, N'-methylene bisacrylamide (MBA) as cross-linking agent, potassium persulfate (K2S2O8) as initiator, in the presence of natural polysaccharide sodium alginate (SA), the PAM/SA hydrogel was prepared by free radical polymerization. Fourier transform infrared spectroscopy (FT-IR), swelling performance tests, scanning electron microscope (SEM), thermogravimetric analysis (TGA), UV-visible spectrophotometer, mechanical property measurements were carried out to analyze the composition, morphology, and performance of the hydrogels. The swelling behavior, dye adsorption performance, and the mechanical properties of PAM/SA hydrogels before and after Fe3+ adsorption were studied. The experimental results showed that the introduction of SA with 4.7%, 7.8%, and 10.3% effectively improved the mechanical and dye adsorption properties of PAM composite hydrogels. The adsorption capacity of PAM/4.7%SA and PAM/10.3%SA hydrogels at equilibrium can reach 40.01 and 44.02 mg/g for methylene blue, which is higher than the value 13.58 mg/g of pure PAM hydrogel. The compressive strength of pure PAM hydrogel is 0.124 MPa. When the SA content is 4.7%, 7.8%, and 10.3%, the compressive strength of the PAM/SA hydrogel was corresponding to 0.130 MPa, 0.134 MPa, and 0.152 MPa, respectively. Fe3+ was introduced into the PAM/SA hydrogels, and PAM/SA/Fe3+ double-network hydrogels with excellent mechanical properties could be prepared by adjusting the SA content (4.7%, 7.8%, and 10.3%), soaking time (1 h, 2 h, 3 h, 4 h, 5 h, 6 h), and Fe3+ concentration (4.76%, 7.41%, 9.09%, and 13.04%). Under the same Fe3+ concentration of 9.09% and adsorption time of 4 h, the compressive strengths of the PAM/4.7%SA, PAM/7.8%SA, and PAM/10.3%SA hydrogels could reach 0.354 MPa, 0.767 MPa, and 0.778 MPa, respectively.
- Open Access
- 27 November 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (24) , 20787-20796
Facile Fabrication of High-Contrast and Light-Colored Marking on Dark Thermoplastic Polyurethane Materials
In this work, using ferroferric oxide (Fe3O4) and zirconium oxide (ZrO2) as laser-sensitive particles and thermoplastic polyurethane (TPU) as the matrix resin, a series of TPU/Fe3O4/ZrO2 composites were prepared by melt blending, and the effect of the laser marking additive content, composition, and laser marking parameters on the laser marking properties of composites was investigated. The laser marking mechanism of Fe3O4/ZrO2 additives and the role of each component in TPU laser marking were studied by metallographic microscopy, color difference test, scanning electron microscopy, and Raman spectroscopy. Fe3O4 nanoparticles as a laser sensitizer component, on the one hand, can act as a pigment to make the TPU substrate black and, on the other hand, can absorb laser energy to contribute to the formation of laser markings on TPU composite surfaces. In addition, the introduction of ZrO2 nanoparticles can help absorb the laser energy, while the contrast can be improved to enhance the laser marking performance of the TPU composite. Through thermogravimetric analysis, the changes in the thermally stable properties of TPU composites before and after laser marking were investigated, and the results indicated that Fe3O4/ZrO2 nanoparticles can absorb the laser energy, causing melting and pyrolysis of the TPU backbone at a high temperature, to produce a gaseous product resulting in foaming. Finally, the high-contrast and light-colored markings were formed on the black TPU composite surface. This work provides a facile method for producing high-contrast and light-colored markings on the dark TPU composite surface.
- 27 November 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (24) , 20787-20796
Open AccessFacile Fabrication of High-Contrast and Light-Colored Marking on Dark Thermoplastic Polyurethane Materials
In this work, using ferroferric oxide (Fe3O4) and zirconium oxide (ZrO2) as laser-sensitive particles and thermoplastic polyurethane (TPU) as the matrix resin, a series of TPU/Fe3O4/ZrO2 composites were prepared by melt blending, and the effect of the laser marking additive content, composition, and laser marking parameters on the laser marking properties of composites was investigated. The laser marking mechanism of Fe3O4/ZrO2 additives and the role of each component in TPU laser marking were studied by metallographic microscopy, color difference test, scanning electron microscopy, and Raman spectroscopy. Fe3O4 nanoparticles as a laser sensitizer component, on the one hand, can act as a pigment to make the TPU substrate black and, on the other hand, can absorb laser energy to contribute to the formation of laser markings on TPU composite surfaces. In addition, the introduction of ZrO2 nanoparticles can help absorb the laser energy, while the contrast can be improved to enhance the laser marking performance of the TPU composite. Through thermogravimetric analysis, the changes in the thermally stable properties of TPU composites before and after laser marking were investigated, and the results indicated that Fe3O4/ZrO2 nanoparticles can absorb the laser energy, causing melting and pyrolysis of the TPU backbone at a high temperature, to produce a gaseous product resulting in foaming. Finally, the high-contrast and light-colored markings were formed on the black TPU composite surface. This work provides a facile method for producing high-contrast and light-colored markings on the dark TPU composite surface.