Abdelali Arous
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdelali Arous has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Huseyin Arslan
Istanbul Medipol University
10 shared publications - Hamza Haif
Department of Electrical and Electronics Engineering, Istanbul Medipol University, Istanbul, Trkiye
7 shared publications - Arman Farhang
Trinity College Dublin
2 shared publications - Afan Ali
Department of Electrical and Electronics Engineering, Istanbul Medipol University, Istanbul, Trkiye
1 shared publication Hamza Haif
1 shared publicationHüseyin Arslan
1 shared publication
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (22) , 53928-53943
CRT-Inspired Multiresolution Ambiguity Suppression for Control-Plane Sensing
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (22) , 53928-53943
CRT-Inspired Multiresolution Ambiguity Suppression for Control-Plane Sensing
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Standards Magazine
- Vol. 10 (2) , 169-176
A Unified Framework for Adaptive Waveform Processing in Next Generation Wireless Networks
The emergence of alternative multiplexing domains to the time-frequency domains, e.g., the delay-Doppler and chirp domains, offers a promising approach for addressing the challenges posed by complex propagation environments and next-generation applications. Unlike the time and frequency domains, these domains offer unique channel representations which provide additional degrees of freedom (DoF) for modeling, characterizing, and exploiting wireless channel features. This article provides a comprehensive analysis of channel characteristics, including delay, Doppler shifts, and channel coefficients across various domains, with an emphasis on their inter-domain relationships, shared characteristics, and domain-specific distinctions. We further evaluate the comparative advantages of each domain under specific channel conditions. Building on this analysis, we propose a generalized and adaptive transform domain framework that leverages the pre- and post-processing of the discrete Fourier transform (DFT) matrix, to enable dynamic transitions between various domains in response to the channel conditions and system requirements. Finally, several representative use cases are presented to demonstrate the applicability of the proposed cross-domain waveform processing framework in diverse scenarios, along with future directions and challenges.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Standards Magazine
- Vol. 10 (2) , 169-176
A Unified Framework for Adaptive Waveform Processing in Next Generation Wireless Networks
The emergence of alternative multiplexing domains to the time-frequency domains, e.g., the delay-Doppler and chirp domains, offers a promising approach for addressing the challenges posed by complex propagation environments and next-generation applications. Unlike the time and frequency domains, these domains offer unique channel representations which provide additional degrees of freedom (DoF) for modeling, characterizing, and exploiting wireless channel features. This article provides a comprehensive analysis of channel characteristics, including delay, Doppler shifts, and channel coefficients across various domains, with an emphasis on their inter-domain relationships, shared characteristics, and domain-specific distinctions. We further evaluate the comparative advantages of each domain under specific channel conditions. Building on this analysis, we propose a generalized and adaptive transform domain framework that leverages the pre- and post-processing of the discrete Fourier transform (DFT) matrix, to enable dynamic transitions between various domains in response to the channel conditions and system requirements. Finally, several representative use cases are presented to demonstrate the applicability of the proposed cross-domain waveform processing framework in diverse scenarios, along with future directions and challenges.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 1792-1796
Adaptive Interference Suppression for AFDM Channel Estimation Under OFDM Coexistence
As research on affine frequency division multiplexing (AFDM) advances, its coexistence with legacy orthogonal frequency division multiplexing (OFDM) systems remains largely unexplored. Particularly, the integration of AFDM networks into environments dominated by the existing OFDM-based infrastructures poses significant interference challenges for the channel estimation (CE), primarily due to the strong OFDM signaling that affects the reception of AFDM signals. This letter proposes a novel interference suppression technique that exploits the cross-logical-domain projection properties of waveforms. Initially, we demonstrate that the interfering OFDM signal behaves as an additive white Gaussian noise (AWGN) with uniform power distribution in the affine domain. Building upon that, an adaptive iterative windowing scheme is developed, applied over the pilot guard interval, to jointly suppress OFDM interference and detect channel taps prior to CE in the affine domain. Simulation results confirm that the proposed method effectively mitigates interference and significantly improves channel parameter estimation accuracy, while maintaining a low system complexity.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 1792-1796
Adaptive Interference Suppression for AFDM Channel Estimation Under OFDM Coexistence
As research on affine frequency division multiplexing (AFDM) advances, its coexistence with legacy orthogonal frequency division multiplexing (OFDM) systems remains largely unexplored. Particularly, the integration of AFDM networks into environments dominated by the existing OFDM-based infrastructures poses significant interference challenges for the channel estimation (CE), primarily due to the strong OFDM signaling that affects the reception of AFDM signals. This letter proposes a novel interference suppression technique that exploits the cross-logical-domain projection properties of waveforms. Initially, we demonstrate that the interfering OFDM signal behaves as an additive white Gaussian noise (AWGN) with uniform power distribution in the affine domain. Building upon that, an adaptive iterative windowing scheme is developed, applied over the pilot guard interval, to jointly suppress OFDM interference and detect channel taps prior to CE in the affine domain. Simulation results confirm that the proposed method effectively mitigates interference and significantly improves channel parameter estimation accuracy, while maintaining a low system complexity.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 74, 14071-14085
DMRS-Aided Cross-Domain Frame Processing for Affine Domain Path Diversity Aggregation
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 74, 14071-14085
DMRS-Aided Cross-Domain Frame Processing for Affine Domain Path Diversity Aggregation
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5189-5193
A Blind Tap Combiner for Low-Power Wake-Up Receiver
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5189-5193
A Blind Tap Combiner for Low-Power Wake-Up Receiver
- 26 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (6) , 11233-11249
Enabling Full-Duplex ISAC Leveraging Waveform-Domain Separability
Integrated sensing and communication (ISAC) in monostatic in-band full-duplex (IBFD) systems encounters significant challenges due to self-interference (SI) at the radar receiver during concurrent communication and radar operations. This paper proposes a novel waveform-domain self-interference cancellation (SIC) technique that leverages the unique properties of orthogonal frequency division multiplexing (OFDM) and affine frequency division multiplexing (AFDM) signals. The proposed approach designs the integrated dual-functionality frame to utilize OFDM for communication and AFDM for radar sensing, both generated using the same modulator block. Then, we establish the conditions under which a wide sense stationary (WSS) process in the time domain appears as WSS in the affine domain and demonstrate that the interfering OFDM signal behaves as an additive white Gaussian noise (AWGN) in this domain. Exploiting this property, the received signal is projected into the affine domain, where the SI appears as AWGN, enabling its subtraction with minimal residual interference. To further mitigate the residual SI, an iterative low-complexity windowing scheme is applied, selectively locking onto the radar signal to reduce the processed signal space. A subsequent time domain spreading step is applied after converting the SIC-processed signal into the post-coded time domain, wherein the SI diminishes separately across the delay and Doppler axes. The proposed method demonstrates superior performance in terms of detection probability, target’s range and velocity root mean square error (RMSE), while maintaining high spectral efficiency and minimal computational complexity.
- 26 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (6) , 11233-11249
Enabling Full-Duplex ISAC Leveraging Waveform-Domain Separability
Integrated sensing and communication (ISAC) in monostatic in-band full-duplex (IBFD) systems encounters significant challenges due to self-interference (SI) at the radar receiver during concurrent communication and radar operations. This paper proposes a novel waveform-domain self-interference cancellation (SIC) technique that leverages the unique properties of orthogonal frequency division multiplexing (OFDM) and affine frequency division multiplexing (AFDM) signals. The proposed approach designs the integrated dual-functionality frame to utilize OFDM for communication and AFDM for radar sensing, both generated using the same modulator block. Then, we establish the conditions under which a wide sense stationary (WSS) process in the time domain appears as WSS in the affine domain and demonstrate that the interfering OFDM signal behaves as an additive white Gaussian noise (AWGN) in this domain. Exploiting this property, the received signal is projected into the affine domain, where the SI appears as AWGN, enabling its subtraction with minimal residual interference. To further mitigate the residual SI, an iterative low-complexity windowing scheme is applied, selectively locking onto the radar signal to reduce the processed signal space. A subsequent time domain spreading step is applied after converting the SIC-processed signal into the post-coded time domain, wherein the SI diminishes separately across the delay and Doppler axes. The proposed method demonstrates superior performance in terms of detection probability, target’s range and velocity root mean square error (RMSE), while maintaining high spectral efficiency and minimal computational complexity.
- 25 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (6) , 10933-10948
A Novel Post-Coded Time-Domain Channel Estimation for Chirp-Based Multicarrier Waveforms
Chirp-based multicarrier waveforms, notably the generalized version, affine frequency division multiplexing (AFDM) have garnered increased attention recently. Particularly, due to its unique channel representation, the channel estimation (CE) in the affine domain raises major challenges. Therefore, this paper introduces a novel, low-complexity CE technique that exploits the properties of chirp carriers in the post-coded time-domain (PCTD). Initially, based on the explicit input-output relationship in doubly selective channels, the inherent properties of AFDM and their dependency on the refining coefficients are analyzed, revealing the limitations of existing guard-based CE techniques. As such, a comprehensive representation of single and multiple chirp carriers in the PCTD is provided both pre- and post-channel transmission, with a focus on interpreting the effects of delay and Doppler shifts. Building on this analysis, a two-stage CE method is proposed, leveraging the zero-padded PCTD (ZP-PCTD) received signal, effectively decoupling delay and Doppler components with scalable resolution. This method effectively compensates for phase selectivity across carriers while maintaining adaptability through scenario-based frame structures with optimized pilot-to-data ratios. The proposed approach significantly reduces the computational complexity and improves spectral efficiency (SE) by minimizing pilot overhead. Simulation results reflect the superiority of the proposed method over the existing iterative schemes, highlighting its ability to improve the performance of AFDM in practical propagation channels.
- 25 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (6) , 10933-10948
A Novel Post-Coded Time-Domain Channel Estimation for Chirp-Based Multicarrier Waveforms
Chirp-based multicarrier waveforms, notably the generalized version, affine frequency division multiplexing (AFDM) have garnered increased attention recently. Particularly, due to its unique channel representation, the channel estimation (CE) in the affine domain raises major challenges. Therefore, this paper introduces a novel, low-complexity CE technique that exploits the properties of chirp carriers in the post-coded time-domain (PCTD). Initially, based on the explicit input-output relationship in doubly selective channels, the inherent properties of AFDM and their dependency on the refining coefficients are analyzed, revealing the limitations of existing guard-based CE techniques. As such, a comprehensive representation of single and multiple chirp carriers in the PCTD is provided both pre- and post-channel transmission, with a focus on interpreting the effects of delay and Doppler shifts. Building on this analysis, a two-stage CE method is proposed, leveraging the zero-padded PCTD (ZP-PCTD) received signal, effectively decoupling delay and Doppler components with scalable resolution. This method effectively compensates for phase selectivity across carriers while maintaining adaptability through scenario-based frame structures with optimized pilot-to-data ratios. The proposed approach significantly reduces the computational complexity and improves spectral efficiency (SE) by minimizing pilot overhead. Simulation results reflect the superiority of the proposed method over the existing iterative schemes, highlighting its ability to improve the performance of AFDM in practical propagation channels.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 10, 1565-1577
Spreading the Wave: Low-Complexity PAPR Reduction for AFDM and OCDM in 6G Networks
The high Peak-to-average-power ratio (PAPR) is still a common issue in multicarrier signal modulation systems such as Orthogonal Chirp Division Multiplexing (OCDM) and Affine Frequency Division Multiplexing (AFDM), which are expected to play a central role in 6G networks. This paper presents a novel unified premodulation data spreading framework that repurposes four well-established transforms—Walsh-Hadamard Transform (WHT), Discrete Cosine Transform (DCT), Zadoff-Chu (ZC) sequences, and Interleaved Discrete Fourier Transform (IDFT)—to achieve up to 4 dB PAPR reduction with lower complexity and zero side information. Conventional PAPR reduction frameworks such as Partial transmission Sequence (PTS) or Selected Mapping (SLM) have a high complexity drawback, as they require extensive search and signaling overhead. In contrast, our framework leverages fast transforms and the inherent chirp structure to redistribute energy before modulation without additional overhead, delivering not only superior PAPR performance but also enhanced phase selectivity and interference resilience. Extensive simulations and analytical derivations confirm its energy efficiency and scalability in large-scale IoT deployments.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 10, 1565-1577
Spreading the Wave: Low-Complexity PAPR Reduction for AFDM and OCDM in 6G Networks
The high Peak-to-average-power ratio (PAPR) is still a common issue in multicarrier signal modulation systems such as Orthogonal Chirp Division Multiplexing (OCDM) and Affine Frequency Division Multiplexing (AFDM), which are expected to play a central role in 6G networks. This paper presents a novel unified premodulation data spreading framework that repurposes four well-established transforms—Walsh-Hadamard Transform (WHT), Discrete Cosine Transform (DCT), Zadoff-Chu (ZC) sequences, and Interleaved Discrete Fourier Transform (IDFT)—to achieve up to 4 dB PAPR reduction with lower complexity and zero side information. Conventional PAPR reduction frameworks such as Partial transmission Sequence (PTS) or Selected Mapping (SLM) have a high complexity drawback, as they require extensive search and signaling overhead. In contrast, our framework leverages fast transforms and the inherent chirp structure to redistribute energy before modulation without additional overhead, delivering not only superior PAPR performance but also enhanced phase selectivity and interference resilience. Extensive simulations and analytical derivations confirm its energy efficiency and scalability in large-scale IoT deployments.
- Open Access
- 30 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
A Novel Channel Estimation for Chirp-Based Multicarrier Waveforms Under Practical Pulse Shaping
As research into candidate waveforms for sixth generation (6G) communication systems accelerates, chirp-based multicarrier, notably the generalized version Affine frequency division multiplexing (AFDM) have garnered increased attention. This paper introduces a novel, low-complexity channel estimation (CE) method that exploits the properties of chirp carriers in the post-coded time domain (PCTD). Initially, we derive the explicit input-output relationship under practical pulse shaping, highlighting the impact of pulse mismatch in the Affine domain. Subsequently, we analyze the inherent properties of AFDM in the Affine domain and identify the limitations of current CE techniques. As such, we present a detailed representation of single and multiple chirp carriers in the PCTD both preand post-channel transmission, with a focus on interpreting the effects of delay and Doppler shifts. Building on that, we propose a two-stage CE method leveraging the zero-padded PCTD received signal, effectively decoupling delay and Doppler components while compensating for phase selectivity and pulse shaping-induced inter-carrier interference (ICI). Our approach considers data-pilot interference levels within adaptive scenariobased frame structures, leading to a significant reduction in complexity and enhanced spectral efficiency (SE) due to minimized pilot overhead. Simulation results reflect the superiority of our proposed method over existing iterative schemes, highlighting its efficacy in improving performance in practical AFDM systems.
- 30 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessA Novel Channel Estimation for Chirp-Based Multicarrier Waveforms Under Practical Pulse Shaping
As research into candidate waveforms for sixth generation (6G) communication systems accelerates, chirp-based multicarrier, notably the generalized version Affine frequency division multiplexing (AFDM) have garnered increased attention. This paper introduces a novel, low-complexity channel estimation (CE) method that exploits the properties of chirp carriers in the post-coded time domain (PCTD). Initially, we derive the explicit input-output relationship under practical pulse shaping, highlighting the impact of pulse mismatch in the Affine domain. Subsequently, we analyze the inherent properties of AFDM in the Affine domain and identify the limitations of current CE techniques. As such, we present a detailed representation of single and multiple chirp carriers in the PCTD both preand post-channel transmission, with a focus on interpreting the effects of delay and Doppler shifts. Building on that, we propose a two-stage CE method leveraging the zero-padded PCTD received signal, effectively decoupling delay and Doppler components while compensating for phase selectivity and pulse shaping-induced inter-carrier interference (ICI). Our approach considers data-pilot interference levels within adaptive scenariobased frame structures, leading to a significant reduction in complexity and enhanced spectral efficiency (SE) due to minimized pilot overhead. Simulation results reflect the superiority of our proposed method over existing iterative schemes, highlighting its efficacy in improving performance in practical AFDM systems.
- 20 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (12) , 22183-22196
A Decentralized Dynamic Relaying-Based Framework for Enhancing LoRa Networks Performance
Long-Range (LoRa) technology holds tremendous potential for regulating and coordinating communication among Internet of Things (IoT) devices due to its low-power consumption and cost-effectiveness. However, LoRa faces significant obstacles, such as reduction in coverage area, a high packet drop ratio (PDR), and an increased likelihood of collisions, all of which result in substandard data rates. In this article, we present a novel approach that employs a relaying node capable of allocating resources dynamically based on signal parameters. In particular, the geometric placement of the relay node is determined by a genetic algorithm that maximizes signal-to-noise ratio (SNR) and signal-to-interference ratio (SIR) success probabilities. Using equal-area-based (EAB) spreading factor (SF) distance allocation scheme, the coverage area is sliced into distinct regions in order to derive the success probabilities for different communication stages. Furthermore, we present a frequency channel shuffling algorithm to prevent collisions between end devices (EDs) without increasing the complexity of the relaying nodes. Through extensive simulations, we demonstrate that our proposed scheme effectively expands the coverage area, conserves transmission resources, and enhances the system’s throughput. Specifically, our approach extends the range by up to 40%, increases the throughput by up to 50% compared to conventional methods, and achieves a 40% increase in success probability. To validate the practicality of our approach, we implement our algorithm in an active LoRa network utilizing an ESP32 LoRa SX1276 module, showcasing its compatibility in real-world scenarios.
- 20 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (12) , 22183-22196
A Decentralized Dynamic Relaying-Based Framework for Enhancing LoRa Networks Performance
Long-Range (LoRa) technology holds tremendous potential for regulating and coordinating communication among Internet of Things (IoT) devices due to its low-power consumption and cost-effectiveness. However, LoRa faces significant obstacles, such as reduction in coverage area, a high packet drop ratio (PDR), and an increased likelihood of collisions, all of which result in substandard data rates. In this article, we present a novel approach that employs a relaying node capable of allocating resources dynamically based on signal parameters. In particular, the geometric placement of the relay node is determined by a genetic algorithm that maximizes signal-to-noise ratio (SNR) and signal-to-interference ratio (SIR) success probabilities. Using equal-area-based (EAB) spreading factor (SF) distance allocation scheme, the coverage area is sliced into distinct regions in order to derive the success probabilities for different communication stages. Furthermore, we present a frequency channel shuffling algorithm to prevent collisions between end devices (EDs) without increasing the complexity of the relaying nodes. Through extensive simulations, we demonstrate that our proposed scheme effectively expands the coverage area, conserves transmission resources, and enhances the system’s throughput. Specifically, our approach extends the range by up to 40%, increases the throughput by up to 50% compared to conventional methods, and achieves a 40% increase in success probability. To validate the practicality of our approach, we implement our algorithm in an active LoRa network utilizing an ESP32 LoRa SX1276 module, showcasing its compatibility in real-world scenarios.